¼” X 10’ Hydraulic Power Squaring Shear with Digital Backgauge and Stroke Controller, Electronically Adjustable Rake Angle, Electronically Adjustable Blade Gap, Rear Sheet Support Variable Stroke Length, Automatic Lube System, Electric Foot Switch, Oil Cooler and Flush Floor Design
Max Shearing Length: 122-¾”
Rake Taper at Max Rake: ⅜” Per Foot
Back Gauge Range (Increased Speed): 48” @ 120 IPM
Number of Hold Downs: 12
Distance Under Hold Downs: 1”
Stroke Speed: 32 - 70 SPM
Motor Power: 25 HP
Squaring Arm: 10’ Left Hand Mounted
Approx. Overall Weight: 16,600 Lbs
Approx. Overall Dimensions: 172” X 86” X 87”
INCLUDES: Digital Backgauge and Stroke Controller, Electronically Adjustable Rake Angle, Electronically Adjustable Blade Gap, Rear Sheet Support Variable Stroke Length, Automatic Lube System, Electric Foot Switch, Oil Cooler and Flush Floor Design
¼” X8’ Hydraulic Power Squaring Shear with Front Operated Power Back Gauge, Left Side Squaring Arm, Power Rake Adjustment, Variable Stroke Length Adjustment, Remote Foot Pedal and Hydraulic Hold Downs.
5’ X ¼” Hydraulic Plate Roll with Digital Readout for Roll Positions, Powered Rear and Bottom Roll Adjustments, Induction Hardened Rolls, Braking System, Gear Driven Top and Bottom Rolls.
3” X 36” Rollformer with Equal Gearing, Auto Lube, Entry Edge Guide and Variable Speed Guide.
24” X 44” 3 - Spindle Drill Line with Yaskawa V10000 Drives, Through Spindle Coolant and All Available Manuals.
5’ X 10’ 4 kW Laser Cutting System with Trumpf CNC Control, Automatic Pallet Changer, Light Curtain Barriers and Chiller.
4’ X 8’ 3,200 Watt Laser Cutting System with Siemens 840D CNC Controller, Trumpf TLF Resonator, Dust Collector and Chiller
140 Tons X 10’ CNC Press Brake with Delem DA53T Control, Front DSP Laser Curtain, Quick Punch and Die, Side Fence, Rear Door with Interlock Switch, Linear Guideways & Ball Screw on Backgauge, Oil Chiller and 5 - Axis Control (Y1, Y2, X, R+V).
¼” X 10’ Hydraulic Shear with E21S Control on Swivel Arm, Falling Platform, Rear Fence / Safety Sensor, Front Support and Oil Chiller.
7.48” X 27” CNC Turning Center with Mori MSX-501 Control, Collet Chucks, Part Catcher / Conveyor, Chip Conveyor and SMW Space Saver Bar Feed System.
25 Ton Turret Punch with CPS System - Programmed Control of Speed, (2) Autoindex Two - Way Stations, USB Ports and Floppy Disk Port.
6' (72″) X 18' (216″) X 6″ Tri-Headed CNC Router Systems with A2MC Smart Console CNC Controller, (3) 5HP 24KRPM ELTE Spindles, (3) EZ Ryder, Barcode Reader, Helical Rack Drive on Long Axis, 6 Servo Drives, Auto Zone Management, Precision Spoil Board, 3X Pop Up Alignment Pins, ESA/CSA Certification, (3) Pressure Foot Systems, (2) UniMister Systems, Complete Dust Extraction System & Material Vacuum Pump
250 Ton X 14’ CNC Hydraulic Press Brake with ETS 3000 CNC Controller, Advantage Package X / R 5 - Axis Backgauge, Motorized Ram Tilt Adjustment, Full Length Lower Die Holder, Auto Crowning, Sheet Followers and Flush Floor Design.
1.77” X .07” CNC Tube Bender with Console and Operator Pedestal, 3 - Axis, Dual Radius Bending and Mandrel Extractor.
180 Ton X 157” Hydraulic Press Brake with 15” Intuitive Touch-B CNC Control, 7 - Axis Includes Crowning, 2 Uses Linear Encoders and Lazer Safe Defender Plus Press Brake Guarding System.
1000 Ton X 46.58’ Double Tandem Press Brake with Delem 66T Controller, 2 Axis Backgauge, Motorized Crowning and Laser Bend Line.
31.49” X 27.56” CNC Dual Column Band Saw with CNC Controls, Automatic Adjusting Wire Brush, Automatically Positioned Guide Arm, Blade Deviation Monitor, Blade Speed Controlled by Inverter and Pulse Motor, Hydraulic Blade Tensioning, Motion Detector and Piece Counter.
3-1/8” X 3/16” CNC Tube Bender with Control with 15” Touchscreen, Toggle Lock Closure, Master Collet Insert for Rapid Change-Out, Programmable Mandrel Extraction Anticipation Angle, Interchangeable Bend Shaft and Automatic MAnagement of Different Bending Styles.
6’ 7” X 13’ 10” X 12” CNC Waterjet Cutting System with Omax Based PC Control, 40 HP 50 KPSI Direct Drive Pump, Terrain Follower, Water Level Control, 600 Lbs Bulk Abrasive Hopper and Abrasive Removal System.
1.73” X 10’ 4 - Roll Hydraulic Plate Roll with NC Control, Hydraulic Drop End, Pedestal Control Stand, Safety Line Around the Machine and Rectilinear Guides
220 Ton Gap Frame Press with Panel - Mate Pedestal Control, Air Clutch, Air Brake, Air Counterbalances, Hydraulic Overloads, T - Slotted Ram and Bolster, Vibration Pads, Powered Ram Adjustments and a 20 HP Main Motor.
5’ X 10’ 10KW Fiber Laser Cutting System with Mazak Mazatrol Preview G 19” Touch Screen CNC Controller, IPG YLS 10000 Fiber Laser Source, IPG Chiller, 10 Shelf FMS Tower (complete Auto Loading/Unloading) w/Complete Safety Guarding & Liberty Systems High Pressure Air Generator, Still Under Factory Warranty!
240” X 72” X 21” Long Bed Vertical Machining Center with Omron FlexCNC Control, AMI5000 Remote Pendant, 20 Station ATC, Through Spindle Coolant, Tool Break DetectionChip Auger and T - Slot Rails.
10' X 40' Dual Head Plasma Cutter with Hypertherm EDGE Connect CNC Controller Unit, Hypertherm XPR300 Power Source, Hypertherm VWI Vented Water Injection Console, Robo-kut 5 - Axis Bevel Cutting Head and Tube-Kut Tube / Pipe Processing System (Never Installed)
2” X 5.9” End Former with On Board Trimming, Quick - Change System, Two - Hand Activation Safety System, Electro - Pneumatic Clamping and Safety - Interlocked Door
½” X 14’ Hydraulic Power Sqauring Shear with Front Operated Programmable Back Gauge, Material Removal Cart System, Electric Foot Switch Operation and Squaring Arm T - slots in Bed.
70 Ton X 8’ Hydraulic Press Brake with YSD6000 CNC Controller, Stroke Control, Operators Pendant Workstation with Foot Pedal, Precision Ground Punch and 4 - Way Die.
5’ X 10’ 2,000 Watt Fiber Laser with IPG Laser Resonator, LEITESEN Rack & Pinion System, Hand Controller.
29.5” X 19.7” X 23.6” Wire EDM with LN2WH CNC Control, Linear Motors (X, Y, U, V), Complete Dielectric Filtration System, AWT, Wire Chopper and Chiller
350 Ton X 12’ Hydraulic Press Brake with Hurco 5C Backgauge, 4 - Way Full Length Dower Die (1”, 2”, 3”, 4” Openings), Full Length Die Block 12’ X 5-¼” OD, Full Compliment of Die Clamps, Powered Ram Adjustment, Pressure Reversal Switch, Tonnage Control with Gauge, Dual Palm Buttons w/ Emergency Stop and Movable Electric Foot Pedal
110 Ton X 10’ CNC Hydraulic Press Brake with 6 - Axis Programmability, Crowning, Wilson Express Quick Tool Upper Clamps and 4 - Axis Backgauge (X1, R, Z1 / Z2)
20 MM Swiss Screw Machine with 5 - Axis, Main and Back Spindle Chucking Device, 4 - Gang Rotary Tool Driving Device, Coolant Device, Cut - Off Tool Breakage Detection, Rotary Guide Brushing Device and Citizen C-320 Edge Bar Feeder
⅛” X 10’ Shear with RAS Touch - Cut Control, Swing Beam Cutting and Part Sorting During Cutting Process.
13 Gauge X 159” CNC Folder with Touchscreen Controls and Automatic Adjustment to Sheet Thickness and Bend Radius.
230 Ton X 12’ Press Brake with Autogauge CNC 300 Automec Back Gauge, Die Rail, Auto Lube System and Remote Foot Pedal
⅝” X 10’ 4 - Roll Plate Roll with Siemens Controls, Hydraulic End Yoke, Central and Side Supports
90 Ton X 8’ CNC Hydraulic Press Brake with Updated Cincinnati Touchscreen Controller, Transducer Positioned Feedback, Narrow Filler Block, Electric Foot Switch, Palm Button Station, Manuals and Clevis Self Aligning Cylinders.
31.49” X 2” Plate Leveling Machine with Bendmak Control Panel, 9 Straightening Rolls and Variable Speeds of Rotation for the Bottom Rolls.
5’ X 10’ 3.5 kW Laser Cutting System with Cincinnati CL-03 CNC Controller, ROFIN SINAR 3500SM Fast Axial Flow Resonator, Koolant Koolers Chiller, Fume Blower, Ridged Steel Frame, Automatic Lubrication, Alignment Laser, Safety Lights and Mats, Power Transformer, 5” and 7.5” Non-Contact Cutting Head.
187 Ton X 10’ Hydraulic Press Brake with Tasc 6000 6 - Axis Control, Footswitch, CNC Crowning, Upper and Lower Hydraulic Tool Holder (Wila Style), Bendguard Safety Device and Pneumatic Die Positioning.
5.5” X 27’10” 2kW Tube Laser with BLM ADIGE Siemens 840D Control, Automatic Bundle Loader, 24’ Finished Part Unloader, BLM ADIGE Tube Cutter2D Cutting Head, Sideros Dust Collector, IPG Closed Loop Chiller, Front Offloading Conveyor and Rear Scrap Conveyor
175 Tons X 12’ CNC Hydraulic Press Brake with ETS 3000 Controller and Backgauge with Powered R - Axis, 2nd Pedestal Workstation Dual Operator Palm Button or Foot Pedal Operation, Full Length Die Rail and Flush Floor Mount Design.
31.75” X 20.5” CNC Turning Center with Haas CNC Controls
¼” X 10’ Hydraulic Shear with Front Operated Backgauge, Power Blade Gap Adjustment, 10’ Squaring Arm and (2) Front Arm Supports.
5’ X 10’ 2 kW Fiber Laser Cutting System with Cincinnati HMI w/ High Resolution 15” LCD Color Touch Screen, IPG Direct Diode Resonator, Dynamic Power Control, A/C Brushless Permanent - Magnet Linear Servo Motors (Y & Z Axes), Dual Linear Servo Motors on X - Axis, CNC Programmable High Pressure Assist Gas and Chiller
4” - 36” Beam Coping System with Hypertherm HPR 260XD, 60’ Infeed Conveyors, 40’ Outfeed Conveyors, Measuring Cart System and Air Filteration Dust Collection System.
220 Ton X 13’ CNC Press Brake with Delem DA69 6 - Axis Control, Pendant Control, CNC Crowning, Hydraulic Upper Tool Clamping, Front Support Bracket, Merlin ISB Safety Curtain Lights, Y1, Y2, X, R, Z1, Z2 and I - Axis.
72” X 144” 4,000 Watt Laser with Mitsubishi LC208 P2 Control, Mitsubishi 40CFX Resonator, Non - Contact Cutting Head, Dual Pallets, Chiller, Dust Collector, Load and Unload System and Rotary Axis System
9” X 42” Vertical Milling Machine with Acu-Rite MILLPWR Control, 3 HP Motor Variable Speed Drive, Meehanite Casting and Chromed Ways
175 Ton X 12’ Hydraulic Press Brake with Push Palm Buttons, Foot Pedal Operation and 3 - Speed Operation.
64” X 40” X 40” Vertical Machining Center with 15,000 RPM, 20 HP Dual Driver Motor, CAT 40, 24 Position Tool Changer and Programmable Coolant.
4’ X 8’ Plasma Cutting System with Starfire CNC Control, Hypertherm 85 Power Source, ProNEST 2019 LT Programming System, Microstep Programmable Torch Height Control, Stepper Motors and Drives, Breakaway Torch Mounting, Water Table Slag Collection, Dual Side Drive, Rugged Construction.
50 Ton 6’ 6” Press Brake with CD2000 Controller, 3 - Axis Back Gauge and Safety Light Curtains.
19.7” X 17.7” X 15.7” Vertical Machining Center with Heidenhain ERGOline CNC Control, Full 5 - Axis Simultaneous Machining, Probe, Tool Measure and Coolant Thru Spindle.
400mm X 3mm Roll Forming System with Dual System Decoiler, Straightener, Welder, Alternating Rolls and Framing.
140” X 60” 40 Ton Punch & Plasma Combination Machine with HPR260XD Plasma System, Siemens 840Di CNC Control, Small Parts Conveyor, Skeleton Drop Conveyor, Dust Collection System and Tool Caddy (Adds 21 Tools to Capacity, 30 Total).
6’ X 13’ 4 kW Laser Cutting System with Trumpf CNC Controller, Automatic Pallet Changer, Light Curtain Barriers and Chiller
13’ X ½” Head Flanger with Bendmak Controls, Heat Treated Dies and Hydraulic Support Rolls.
36 Ton 60” X 120” CNC Punching Machine with Boschert CNC Control, Fully Automatic Sheet Loading & Unloading System, Pneumatic Material Clamps, Automatic Repositioning, Extra Heavy-Duty X - Axis for 400 Kg Sheet Cap., Trumpf Locking Die Holders, Vacuum Slug Removal, Automatic Tool Lubrication and Ball Supports on Table.
¾” X 156” CNC Hydraulic Shear with Ercut 7 CNC Control, Portable Foot Pedal, CNC Hydraulic Gap Control, CNC Controlled Blade Rake, CNC Motorized Backguage, Swing Up Backgauge, Shadow Light, Ball Bearing Table and Central Lube.
9” X 14” Abrasive Finishing Machine with Dry Belt Sander, Dust Collection System, RPM Adjustment for Disc and Speed Rate Adjustment for Belt.
5’ X 10’ 4.5 kW Laser Cutting System with Amada AMNC/F CNC Controller, Fanuc C4000i-C 4,500 Watt Laser Resonator, Pallet Shuttle, Orion Air Dryer, Magnetic Linear Drive System, Chiller and Dust Collector.
6’ X 12’ Abrasive Finishing Machine with Mitsubishi M700 CNC Controller, KMT Streamline SL-IV 50 HP Intensifier (Rebuilt May 2023), with Topworks, New Proximity Switches, Pressure Sensors, Garnet Removal System,Taper Control System 5 - Axis Cutting Head, Various Spares and Pallet of Garnet and Abrasive Hopper
5’ X 10’ 4 kW Fiber Laser Cutting System with Amada AMNC-F CNC Controller, LST Shuttle Table Fiber Oscillator AJ4000 (Gen 2) and Orion Inverter Chiller RKE5502A
31” X 17” X 25” Vertical Mill with Trak A.G.E. 3 CNC Controls, Power Draw Bar, Power Feed for Elevation and RS232 Port.
23.62” X 17.71” X 17.71” 5 - Axis Vertical Machining Center with Heidenhain CNC Controls, Probe, Chip Conveyor and Programmable Coolant.
40” X 50” 33 Ton Turret Punching System with Amada 04 PC Controller, 58 Station with 2 Auto Index Stations and (2) Holders with Ball Transfer Table.
5/16” X 6’ Plate Roll with Operator Control Panel.
¼” X 12’ High Speed/Heavy Duty Mechanical Power Squaring Shear with Microcomputer Gauge Controller, 12’ Front Squaring/Gauge Arm, Electric Foot Switch, Air Electric Cylinder Jaw Clutch and Automatic Pressurized Lubrication.
100 Ton X 12’ Hydraulic Press Brake with Delem DA 56 CNC Control, Y1 / Y2 Ram Positioning, Sectional Ram Clamps and Electrical Foot Switch / Palm Button Station.
6,000 Lbs Forklift with 2 - Stage Mast and LP Powered.
3” X 3” X ⅜” Angle Roll with Digital Readout, Manual Guide Rolls, Universal Tooling, Horizontal & Vertical Working Positions.
43.3” X 22” X 20.5” Verical Machining Center with Fanuc i Series CNC Controller, Linear Roller Guideways, 30 Count ATC and Minimum Quantity Lubrication.
23.6” X 15.7” X 12.2” Wire EDM with ADVANCE PLUS Control and Automatic Wire Threading
25.6” X 17.7” X 16.5” Wire EDM with Makino Hyper I CNC Control & H.E.A.T. Technology, Glass Scales, Chiller, Transformer, Fine Hole Automatic Wire Threading (AWT), AWT Jet Needle, AWT Jet Filler, AWT Jet Nozzle, AWT THermal Cutter, Special Hardening U - Shape Table, Split Precision V - Guide Wire Grid System, Automatic Tank Height Setting Function, Pro - Tech (Anti - Rust Function), “Orion” Dielectric Fluid Cooling Unit, Tension Gauge, USB and Ethernet Capabilities.
135 Ton X 10’ Hydraulic Press Brake with Hurco Autobend 7 Controller & Backgauge, Narrow Filler Block, Electric Foot Switch, Palm Button Station and Manuals.
37” X 60” Abrasive Finishing Machine with Through Beam Abrasive Belt Tracking, Double Infeed and Outfeed Holddown Rolls, (1) Contact Drum, Digital Thickness Readout, Built - In Coolant Paper Filter and Recirculation Pump, Air Knife Parts Dryer, Ventral Lube Block, Quick Release Outboard Support, Motorized Lift and Timesaver Tracking Eyes.
50” X 100” CNC Thin Turret Punch with GE Fanuc 180i P Control, 29 Station Turret Configuration with 3 - Auto Index Stations and Repositioning.
8.2’ X 20’ 12,000 Watt Fiber Laser with FS8000 Control System, Cypnest Nesting Software, Fan for Fume Extraction, Dust Collector 6 Core, Air Compressor with Dryer Combo and Tongfei 120000 Water Chiller.
6’ X 24’ CNC Plasma Cutting System with Hypertherm XPR 300, Pneumatically Adjustable Water Levels for Easy Part Removal, Gantry w/ Top Mounted Linear Rails and Mitsubishi Freqrol A200 High Function Low Acoustic Noise Inverter.
110 Ton Single End Punch with 30” Throat Depth.
110 Ton Ironworker with Universal Open Tooling System, Hydraulic Hold-Downs, E - Stop / Lockout Tagout, Electrical Stroke Control, Central Lubrication System, Swing - Away Stripper Assembly, Roller Encoder Measuring System, Quick Change Punch Assembly, Premium Gauging Tables and LED Lighting.
8” X 8” X 1-¼” Profile Rolling Machine with Digital Display, Hydraulic Guide Rolls, Pulling Device for Bending U - I - H Profiles
100 Ton X 10’ 5 - Axis CNC Press Brake with ETS 3000 CNC Control, 4 - Axis Backgauge (X, R, Z1 & Z2).
5’ X 10’ Waterjet Cutting System with Windows 10 PC Based Controller (Upgraded), 30 HP 60 KPSI Intensifier Pump, 600 Lbs Abrasive Hopper, Slat Table & Chiller.
40” X 20” X 25” Vertical Machining Center with Haas 32 - Bit CNC Control w/ 12” CRT Screen, Hard Disk Drive, Floppy & Ethernet Interface, Rigid Tapping, High Intensity Lights, 40 Taper, 55 - Gallon Flood Coolant System, Programmable Coolant, Auger / Scrap Chute, (2) RS-232C USB Ports and 4th - Axis Prewired and Ready.
13.76” X 9.84” X 11.81” Sinker EDM with Full C - Axis, 4 - Position Tool Changer Rack, (3) Electrode Holders, Chiller and Transformer.
60 Ton X 8’ Hydraulic Press Brake with 2 - Axis CNC Back Gauge System (ETS & Hurco 7), Black Max Light Curtains, Adjustable Back Gauge Fingers, Lower Die Rail, Adjustable Speed Control, Adjustable Front Support Arms, Upper Sectional Ram Clamps, Remote Control Pedestal w/ Palm and Foot Pedal.
31.5" X 27.5" X 25.19" CNC Horizontal Machining Center with Fanuc Makino Professional 3 CNC Controls 4th Axis Pallet Rotation, Complete With Pallet Changers, (2) 19-1/2" X 19-1/2" Pallets, HSK100A Spindle Taper, 14,000 rpm Spindle, Rosedale 1000 PSI High Pressure Coolant Pump, With Coolant Thru Spindle, Oilmatic External Oil Cooler, 40-Position ATC and Filtration System
5’ X 10’ Waterjet Cutting System with Multicam EZ Control, KMT NEOline 40i Intensifier Pump, Media Abrasive Funnel, Sump and Pump.
2-½” X 11 ga Tube Bender with Touch Screen & Foot Pedal Control, Hydraulic Auxillary Axes, Rolling System and Spiral Bending, Operational with or without the Mandrel.
¼” X 10’ Hydraulic Shear with Electric Foot Switch Operation, Solid Table, 40” Front Operated Motorized Back Gauge and 8’ Squaring Arm
5’ X 10’ 4 Kw Laser Cutting System with Trumpf CNC Controller, Automatic Pallet Changer, Light Curtain Barriers and Chiller.
Nitrogen Generator Package with 99.99% Purity at 85 PSIG with a Flow Rate of 3170 SCFH, Fully Programmable PLC with HMI Touch screen and Smart-Trak, Oxygen Analyzer, Rotary Screw Air Compressor, Oil / Water Separator and Nitrogen Flow Meter.
0.236 X 10’ Shear with Pneumatic Sheet Supports, Backgauge, Two Support Arms and Light Curtain Finder Guard.
120 Ton X 10’ Hydraulic Press Brake with Modeva CNC Control, ESA S530, XR Gauge, Wilson Express Rail 2000 - Upper Hydraulic Clamping with Power Pack, Two Support Arms on Linear Guide and CNC Crowning
1.2mm X 4.5’ Automatic Panel Bender with PC Based Numerical Control System, QT500-7 and Gray Iron 250 Casted Frame and Panel Thickness Detections System.
21” X 9.3” X 21” CNC Turning Center with Haas Next Gen CNC Control 20 HP with 12 Block Style Turret, Tool Presetter, Y - Axis, Parts Catcher and Live Tooling.
7 - Axis Fully Programmable Welding Robot with Remote Pendant Control, Safety Fencing Protecting Users from robots Range & From Harmful Arc Rays, Safety Light Curtains, Torch Changing Station w/ Collision Sensor Automatically Changes between Single and Tandem Torch Heads and CLOOS WPEK - 30000N Work Piece Positioners with Freely Programmable Turn Axis and Tilting Axis, Synchronization of Robot Axes with Motions of the Work Piece Positioners Enables the Robot System to Follow Complicated Contours.
5’ X 10’ 2,000 Watt Laser Cutting System with Fanuc 0il Control and Fanuc C2000 Resonator.
160” X 100” X 60” Horizontal Boring Mill with Tosnuc 999 CNC Control, 1200 Meters Part Program Storage, B - Axis Table (360,000 Positions), Chip / Air Blower, Chip Conveyor, Coolant Through Spindle and Full Factory Enclosure.
24” X 14” X 18” Vertical Machining Center with Fanuc Oi-MF CNC Control, CAT-40 Taper Spindle w/ 8,000 RPM, Rigid Tapping, Carousel Style 16 Style Tool Capacity Changer, Box Way and Pull-Out Style Chip Pan.
5’2” X 5’2” CNC Waterjet Cutting System with Mobile Control Station w/ 23” Widescreen Display, 20 HP Motor, Brushless Servo Motors, Stainless Steel Hardened Precisoned Ground Shaft Ways, Real Time Close Loop Feedback with Digital Drives, Bridge Style Y - Axis and Intelli - Trax Drive Technology with Precision Linear Encoders.
200 Ton Press with Palm Button Controls, Air Clutch, Air Brake, Air Counterbalance, Helm Series 4 Load Guard and Floor Standing
90 Tons X 12’ Mechanical Press Brake
½” X 8’ Plate Roll with Davi “Easy” Controls, Swing Away Control Panel, Automatic Balancing System, Planetary Swing Guides, Siemens Electric, Full Hydraulic and Multiple Speeds.
6” X 6” X ⅝” Hydraulic Angle Roll with Siemens Control and Hydraulic Guide Rolls.
13’ X ⅜” Hydraulic Shear with SC100T Shear Control with Touch Screen, Pendant Control, Safety Equipment, Standard Hold Downs, Finger Protection Type w/ Hand Gaps, Motorized Back Gauge, Standard Plate Support, Squaring Arm, Cutting Line Illumination with Wire and Set of Blades for Stainless Steel
American Made 6’ X 12’ Laser Cutting with CYPCUT Laser Control System w/ Auto Height Sensing, available with 2.0KW, 3.0KW, 4 KW or 6KW nLight Corona Power Source, Fiber Optic Cable Beam Delivery to Cutting Head, Lasermec Fiber 2D Cutting Head, Dual Pallet Electrically Driven Shuttle System for Material Table, Work Area Fully Enclosed for Safety, “Laser Safe” Windows for Viewing, Auto Focus Cutting Head, Chiller, Proportional Control Valves for N2 and 02 Assist Gasses, Powered Dual Shuttle Table. MADE IN AMERICA!
60 Ton X 8’ Hydraulic CNC Press Brake with ETS3000 Premium 4 - Axis Backguage, Updated ETS3000 Control Head and Machine Manuals.
170 Ton X 13’ 8 - Axis CNC Press Brake with Trumpf / Delem CNC Controller, 4 - Axis Backgauge and Crowning.
175 Tons X 12’ Hydraulic Press Brake with Automec CNC 150 Autogage and ETS Ram Control.
4’ X 4’ Plasma Cutting System with Siemens Solid Edge 2D CAD, Thermal Dynamics Autocut 300XT Plasma Unit, Automatic Torch Height Control, Parker-Hannifin Dust Collector and Nitrogen Plasma / Water Shield Mixer Unit.
22” X 80” Flat Bed NC Turning Center with Fagor CNC Controller, 3.38” Spindle Bore, 10 HP Geared Head Motor, 4 - Position Toolpost, Conversational Software and Teach Mode.
40” X 60” 40 Ton Punch Combo with HPR 260 XD Plasma Cutting System, Siemens 840Di CNC Control, 9 - Station Rail Tool Changer and Skeleton Drop Table.
5’ X 10’ 2.5 KW Laser Cutting System with Trumpf CNC Controller, TruCoax 2500, Recently Replaced Bellows & Ignitor Bulb, Extra Nozzles and Lenses.
300 Ton Press with Two Hand Controls, Hydraulic Tonnage Control, Full Tonnage Throughout Stroke, Counterbalance Valve For Punching and Magnetic Starter with Over & Under Voltage Protection with Disconnect Switch.
100 Ton X 8’ Hydraulic Press Brake with ETS3000 3 - Axis CNC Premium Backgauge, (2) Fixed Fingers, Adjustable Bending Speed Continuation and WILA CNC Crowning Die Holder
6’ X 12’ Waterjet Cutting System with Flow Computer Based Controls, Dynamic Cutting and 600 Lbs Hopper.
30” X 16” X 20” Vertical Machining Center with Haas CNC Control with USB Port, Brushless Servos on All Axis, (2) Speed Gear Box, Programmable Coolant, Quick Code, Rigid Tap, Twenty Position Automatic Toolchanger, Chip Auger, Telescopic Way Covers, Air Gun, (6) Leveling Pads, BIJUR Automatic Lubrication System, 20 HP Vector Dual Drive, Through Spindle Coolant, Rigid Tapping, Coordinate Rotation and Scaling, High Speed Machining, M19 Spindle Orientation, Haas HRT210 4th - Axis Rotary Table, Machine Manuals, External Coolant Tank & Coolant Pump.
¼” X 10’ Hydraulic Power Squaring Shear with Digital Backgauge and Stroke Controller, Dual Front Support Arms, Light Beam Shearing Gage, Electronically Adjustable Rake Angle, Electronically Adjustable Blade Gap, Variable Stroke Length, Automatic Lube System, Electric Foot Switch, Oil Cooler in a Flush Floor Design
20 Ton 101.4” X 52.6” Turret Punch with GE Fanuc Series 180i-PB Control, 30 Stations, Standard Auto Index, Roller Ball Table and Machine Cooling System.
25.5" X 15.75" X 16.5" CNC Wire EDM with MGW-S6 Control, Wire Alignment Device, Auto Threading and Submerged
5’ X 10’ 6,000 Watt Laser Cutting System with Amada AMNC-F Controller, Dust Collector, Dual Shuttle Table, Chiller and High Pressure Assist Gas
1-⅛” X 10’ Four - Roll Plate Roll with AK 400 CNC Control System, Cone Rolling Device, Induction Hardened Rolls, Two Rolling Speeds and Oil Cooler.
Refurbished 4060 LBS Lifting Capacity Forklift with Cushion Tires, LP Powered, Fork Positioning, Side Shift, 3 Stage Mast, Automatic Transmission, Safety Cage and Blue Safety Lights (Refurbished), New Drive Tires, Seat and Paint. No Hydraulic Leaks
10’ X 40’ 12,000 Watt Laser Cutting System with FSCUT 8000 CNC Control System, Water Chiller, Transformer, Voltage Regulator, Enviromental Cabinet for Laser Resonator, Two Year Warranty, Onsite Installation and Training.
8’ X 26’ 12Kw Fiber Laser with Pallet Shuttle Table, FSCUT 8000 CNC Controls, Hans Photonics (CorActive) 12,000 Watt Resonator, Hans Focus HC15 Laser Head, Transformer, Chiller, Voltage Regulator, Environmental Cabinet for Laser Resonator, On-Site Installation and Training and Two Year Warranty.
¼” X 12’ Heavy Duty Production Shear with Programmable Control (Programs: Cut Length, Rake Angle, Blade Gap and 0 - 48” Back Gauge Position).
5’ X 10’ 4,000 Watt Laser Cutting System with PreView II CNC Controller, Dust Collection System, Flying Optics Machine Structure and Ball Transfers in Shuttle Table.
13 - 3/8" X 40" Engine Lathe with 3 - Jaw Chuck, Lever Operated Collet Closer, Coolant System, Worklight, Quick Change Toolpost with Holders, Thread Dial, Foot Brake and One Shot Lubrication System.
6.5’ X 13’ 12KW Shuttle Table Fiber Laser with Cypcut Controls, Cypnest Nesting Software, Han's Focus HC15 (Auto Focus) Laser Head, Water Chiller, Transformer, Installation, Freight to Your Location! Two Years Warranty! Installation and Training.
37” X 75” Abrasive Finishing Machine with 3 Heads (2) Belt Sanders (1) Brush Head and Donaldson Torit Dust Collector.
90 Ton X 12’ Hydraulic Press Brake with Hurco Autobend 7 Controller, Narrow Filler Block, Electric Foot Switch, Dual Palm Buttons, Interlocked Construction Adjustable Tonnage Control, Micromeeter Ram Tilt Adjustment and Clevis Mounted Self Aligning Cylinders.
12-¼” X 13-¼” Double Column Programmable Saw with Vibration Free Sawing, Feeder with Gearmotor and Ballscrew, Small 2” Scrap end, Material Sensor, Variable Vise Pressure, Blade Tension Indicator, Fully Programmable, Stores Jobs for future use, Robust Construction and Hinged Panels for Easy Cleaning and Maintenance.
37” X 60” Abrasive Finishing Machine with Through Beam Abrasive Belt Tracking, Double Infeed & Outfeed Holddown Rolls, (1) 6” Diameter Contact Drum, (2) 6” Diameter Brushes, Digital Thickness Readout, 23” Infeed Loading Area, Built - In Coolant Paper Filter and Recirculation Pump, Air Knife Parts Dryer, Ventral Lube Block, Quick Release Outboard Support, Motorized Lift and Timesaver Tracking Eyes
16” X 16” Horizontal Bandsaw with Automatic Chip Conveyor, Hydraulic Blade Tension and Variable Speed
19” X 60” Triple Head Wet Finishing Machine with Digital Thickness Readout, (2) Drum Heads, (1) Brush Head, Dual Infeed & Outfeed Holddown Rolls, Paper Filtration / Coolant System and Air Knife Dryer.
62” X 50” CO2 Laser Engraving / Rastering / Cutting System with Multicam EZ CNC Controller, Synrad 100W Resonator, up to 2400IPM Rapids, Servo Drives, Micro Air Clean Air System, Dimplex Chiller, Great for Acrylics, Wood, Marble / Granite, Polycarbonates and Metals.
80” X 160” CNC Waterjet with Omax PC Based Control, 3 - Axis Motorized Z - Cutting Head, 40 HP Pump Motor and 60 KPSI Pump Pressure.
230 Ton X 10’ Hydraulic Press Brake with Cincinnati 4 - AxisTouch Screen CNC Controller, Automatic Hydraulic Crowning in Bed, 40” Independent Travel Backgauge w/ Manual R - Axis, (2) Portable Palm Stations, Power Ram Tilt, (2) Portable Foot Pedals, Tonnage Control, Stroke Speed Control, Sectionalized Ram Clamps, (4) Backgauge Fingers, (2) Front Support Arms, Full Length Die Holder and Link Lite Black Max Lite Curtains.
13.6 Ton Capacity Diesel Forklift with 7’ Forks.
300 Ton X 28’ Hydraulic Press Brake with Dual Foot Pedal Controls, 24” Horns on Both Sides, 24” Manual Front Operated Backgauge, Riser Block on Bed and Bed Slotted for Dies.
6.5’ X 13’ 2KW Shuttle Table Fiber Laser with Cypcut Controls, Cypnest Nesting Software, Raytools (Auto Focus) Laser Head, Water Chiller, Transformer, Installation, Freight to Your Location! Two Years Warranty! Installation and Training.
72” X 84” X .60” Leveler with 4 High Roll Arrangement.
12” X 12” Horizontal Bandsaw with Amada NC Control, 1-½” Blade Parts Counter and Chip Conveyor.
25.2” X 17” X 18.1” Mini Mill with Fanuc 0i-MF Control, CAT 40 Taper, Linear Roller Way, Spindle Chiller, 24 Capacity ATC, Air Blast at Tool Change, 42 Gallon Coolant System, Pull Out Style Chip Cabinet and Heat Exchange System for Electric Cabinet.
23 Ton 100” X 50” Turret Punch with Strippit CNC Control, Standard Auto Index and Roller Ball Table.
Refurbished 10K LBS Capacity Forklift with Perkins Diesel Engine, New 60” Forks, 3 Stage Mast, 197” Max Lift Height, Side Shift, Floodlights, New Steer Tires & Fresh Paint
⅜” X 12’ Mechanical Shear with Cincinnati Micro Computer Gage Control, 12’ Stacker, Squaring Arm & Front Arm Support.
60 Tons X 6’ Hydraulic Press Brake with ETS 3000 Backgauge Controls (X/Y/R), Powered R - Axis, ETS100 Pedestal Control, A/C Unit for Electrical Cabinet and Machine Grooved in Bed.
5’ X 10’ Fiber Laser with Windows Based CNC Controller, 12 Kw, Helical Rack and Pinion Positioning System, Red Diode Laser Pointer, Dual Pallet Shuttle System, Ball Transfer Table, Donaldson Torit DFO3-9 Dust Collection System, Koolant Koolers Chiller, Automatic Nozzle Changer, Automatic Lubrication System, Automatic Gas Control and Proportional Valve.
90 Ton X 10’ Hydraulic Press Brake with Cincinnati CNC 2 - Axis Back Gauge and Ram Control, Manual R - Axis, 3 - Speed, Adjustable Tonnage Control Lower Die Rail, Section Ram Clamps, 15 HP AC Motor, Dual Palm Buttons Mounted on Face of Machine with E - Stop, Remote Foot Pedal, Full Dovetail Slots Across Bed Face, Front & Rear Bed and Ram Machined for Angle Brackets and Micrometer Ram Tilt Adjustment
41.34” X 35.43” X 38.58” Horizontal Machining Center with MSX-501 CNC Control, Full 4th Axis, Chip Conveyor, Thru Spindle Coolant, Assorted Angle Plates, (3) Kurt 8” Vises, 140 CAT 50 Tool Holders and CAT 50 Tool Holder Rack.
500 Lbs Capacity Boomlift
⅜” X 12’ Mechanical Shear with Cincinnati Micro Gage Control, 12’ Stacker, Squaring Arm and Front Arm Supports.
37” X 60” Combination Belt / Brush Finishing Machine with Mitsubishi E700 PLC Control Two Head Wet Operation (1) Widebelt & (1) Oscillating Drum Brush, Disc Brakes on Main Motor, Double Infeed & Outfeed Holdown Rolls, Auto Lube System, Air Knife Dryer with Blower, Conveyor Belt Tracking, Coolant / Filter System, Quick Release Outbound Support and Infeed Stop Bar.
120” X 40” X 30” 5-Axis Vertical Machining Center with 30 HP, 10K RPM Spindle, TSC, 32 Position CT 40 Tool Changer, High Speed Machining, 16MB Memory, Rigid Tapping, 32 Position P-COOL Coolant Spigot, Coordinate Rotation & Scaling, Macros, Chip Auger, Floppy Disk Drive, USB Port, Linear Scales, Second Home Button, M19 Spindle Orientation P & R Codes, VQCPS Full Probing System, Tool Presetter Probe, and Power Failure Module. Very Low Hours (Under 3K Spindle Hours). Factory Service Inspected and Prepped.
5” X 150” Automatic Plate Saw with EZ Series DVG Control and Chip Auger.
39.4” X 39.4” Horizontal Boring Mill with Tosnuc 888 CNC Control
42” X 24” X 24” Vertical Machining Center with 24 Position ATC and CAT 40 Taper.
42” X 24” X 24” Vertical Machining Center with 24 Position ATC, CAT 40 Taper and 4th Axis.
24 Ton X 60” X 98.5” CNC Turret Punch with Windows Based Controls, Programmable Rotation of Tooling, 10 Station Multi - Tool, 6 - Station Multi - Tool, Etching Tool, Multi - Tool Setup Fixture, Brush / Ball Transfer Table, Programmable Speed of Stroke, Automatic Clamp Positioning, Automatic Programmable Lubrication Device and Safety Mats.
50” X 26” X 24” Vertical Machining Center with 24 Position ATC, CAT 40 Taper and 24 HP Motor.
14,100 Lbs Capacity Deisel Forklift with Pneumatic Tires.
50” X 26” X 24” Vertical Machining Center with 24 Position ATC, CAT 40 Taper and 24 HP Motor.
4’ x 4’ 4KW CNC Fiber Laser with Touch Panel PC Control, IPG Cutting Head, YLS-4000 IPG Resonator, Chiller, Dust Collector, Software & Computer.
15,500 LBS Capacity Diesel Forklift with Pneumatic Tires, 2 - Stage Mast with Side Shift and Dual Drive.
30 Ton 50”X80" CNC Thin Turret with 2,200 Watt Laser System, Fanuc Series O-P Control, 40 Station, Torit Downflo Dust Collector, Repositioning up to 10” in Length and Koolant Kooler Chiller Unit.
5,000 LBS Capacity Forklift with Pneumatic Solid Profile Style Tires, LP Powered, 3 Stage Mast, Fork Positioner, Blue Safety Lights and Safety Cage
100 Ton X 10’ Hydraulic Press Brake with NPL 3 Axis Control
6’ X 12’ Capacity 2.5KW (2,500 Watt) Laser Cutting Systems with Cincinnati PC Based Controller, Rofin 2.5KW Slab Resonator, Koolant Koolers Chiller, Non-Contact Cutting Head, Just Serviced by Manufacturer (Serviced ONLY by Cincinnati and Coherent (Rofin)) with all external optics replaced less than 100 hours ago (again, all work performed by CI) and under 13K Hours Beam On Time. Inspect In-Plant and Under Power.
30” X 20” X 24” Vertical Machining Center with the Hurco Ultimax Dual Screen CNC controller, 15K 17HP Spindle Drive, 24 Position Side Arm Tool Changer, Coolant Washdown Nozzle, Air Blow Nozzle, Tool Probing, Part Probing, Rigid Tapping, Adaptive Surface Finishing, Ultinet, DXF Input with 16K Spindle Hours.
50” X 26” X 24” Vertical Machining Center with the Hurco Dual Screen Controller, 24 Position Side Arm Tool Changer and 10K RPM 24 HP Spindle
16 Gauge X 10’ CNC Folder with RAS Series 600 Touch Screen Control and Selection of Goatsfoot Tooling
18" X 13" Manual Bandsaw with PLC Controls, Direct Drive Blade, Gravity Head Feed, Cast Iron Frame and Guide Arms and Adjustable Flood Coolant System
5/16" X 6' 4-Roll Plate Roll with Drop-End for Easy Parts Removal and Overhead Support
22” X 16” X 20” Vertical Machining Center with Fadal CNC88HS Control, Tool Holders to Fill the ATC, 21 Station Tool Changer and Manuals
5.5" Capacity Fully-Automatic Non-Ferrous Aluminum Cutting Saw with 3,000 RPM Blade Speed, Two Pneumatic Vices and Bar Support Arm with Bar Stop
9,800 LBS Capacity Forklift with Cushion Tires, LP Gas Powered, Fork Positioning and Side Shift
7” X 2 3/4” Cold Saw with Automatic Programmable and Pivot Arm Cold Saw
10,000 LBS Capacity Forklift with Cushion Tires, LP Powered, Three Stage Mast and Side Shift
137.8" X 98.42" X 62.99" Horizontal Boring Mill with Fanuc 16im CNC Control, Built-in "B" Axis Rotary Table, Coolant Thru Spindle and Telescoping Way Covers Chip Conveyor
4' X 4' Waterjet with CNC WARDJet Move and WARDCAM Software Touchscreen Controller, Hypertherm Echion 50 Intensifier Pump 50 HP - 60,000 PSI, Programmable Z-Axis, Helical Rack and Pinion Drive Mechanism, Integrated 85 LBS SmartFeed Bulk Feed Hopper, Abrasivejet Cutting Head with Diamond Orifice and Thimble Filter. Only 156 Hours
23.6" X 15.7" X 18.1" Vertical Machining Center with Fanuc Oi - Mate - MD CNC Control, Chip Pan, Flood Coolant and Linear Construction
39" X 39" X 37" Horizontal Machining Center with Makino Pro 3 Control, 1,000 PSI Thru Spindle Coolant & Air, Tool Life Monitoring, AC & Spindle Monitor, Spare Tool Selection, 1° Table Indexing, Part Program Storage, Splash & Chip Shield, Overhead Shower Coolant System, Random Pallet Selection, Rigid Tapping, Door Interlocks, Air Dryer, Drag Type L/U Conveyor, GI Control, Helical Interpolation, High Speed Skip Function and Data Server
192 Ton X 146” Hydraulic Press Brake with Delem DA-66T Control, 4-Axis Backgauge, Sheet Followers, Hydraulic Upper and Lower Tooling Clamps
100 Ton Capacity Beam Line with Updated Automation Control, Computer Pentium MMX 233 MHZ, Manual Control, Hydraulic Power Unit, Length Measuring Probe Drive, Top Flange Unit Upper and Lower Punches, Input and Output Relay
51.2” X 11” Knee Mill with Variable Speed, Spindle and Turret Head, Horizontal Arbor Supports with Arbor, Coolant System, One Shot Lubrication and Bijur #UBA2 Spray Mist Coolant Unit
51.2” X 11” Horizontal and Vertical Milling Machine with Pendant Control, Horizontal Arbor Supports with Arbor, Coolant System and One Shot Lubrication
300 Ton X 13’ Hydraulic Press Brake with CYBELEC DNC70 CNC Controls, 2-Axis Backgage (X&R), Foot Pedal Station and Adjustable Time Under Load (Dwell) Pressure
44” X 27.95” X 55.11” Engine Lathe with 16 Spindle Speed Gear Ranges, Bison 25” Chuck (Front), QU 25” Chuck (Rear), Boring Bar Attachment, A2-20 Spindle, Electric Motor for Rapid Traverse and Rear Chuck Mount
90 Ton X 8' Hydraulic Press Brake with Hurco Autobend 4 Control and American Style Tooling
12” X 8” X 4.72” CNC Turning Lathe with Fanuc Control, Dual Gantry Loader, A2-5 Spindle Nose and Remote Pulse Generator
11” X 2.3” Optical Measuring Machine with Computer, Monitor & Software, Full Set of Users Manuals and Collets and Tooling Accessories
11.6” X 4.7” X 13.3” CNC Turning Center with Muratec / Fanuc Pendant Controller, (2) 8" Diameter Howa Chucks Model Ho11Mb8, Single Gantry Style Machines, Chip Conveyors and Gantry Load & Unload Software Package and Wiring
13.3” X 7.8” X 15.3” with Fanuc Control, Optional Heavy Duty A/C Spindle Motors, Tailstocks, Single Turrets, Gantry Loaders, Part Holders and Chip Conveyors
1/4" X 10' Hydraulic Shear with Ercut 7 Control, Cutting Line Illumination and Shadow Line, Hydraulic Blade Gap CNC Adjustment, LEUZE MLD 520 Rear Protection Light Curtain, Hardened Blade and 1 Meter Squaring Arm
3” X 3” X ⅜” Angle Roll with Hydraulic Guide Rolls.
1/4" X 10’ Hydraulic Power Squaring Shear with Accurshear Control, Front Operated Programmable 36” Backgage, Stroke Control, Quick Blade Gap Adjustment
7-7/8" X 7-7/8" X 3/4" Angle Roll with CNC Controls Hydraulic Guide Rolls and H - Profile Bending Device
16,500 LBS Capacity Forklift with Dual Pneumatic Tires, V-6 Gas Engine Powered and 2 Stage Mast
4' X 11GA Plate Roll with Cast Iron Frame, Central Rollers, Cone Bending Device, Self Braking Main Motor and Remote Emergency Stopping w/ Safety Trip Wire.
110 Tons X 10’ CNC Hydraulic Press Brake with Amada CNC Controller, 6 Axis Programmability, Crowning, Wilson Express Quick Tool Upper Clamps and 4-Axis Backgauge (X,R,Z1/Z2)
30,000 LBS Capacity Forklift with Solid Tires, Propane Powered, Single Stage Mast, Lights and Low Hours
14.9” X 13.78” X 5.51” CNC Twin Spindle Turning Center with Program Select Switch, Coolant System, High Speed Gantry Loader, Rear Discharge Chip Conveyors and Work Clamp Confirmation – Both Sides (2 AVAILABLE)
14.9” X 13.78” X 5.51” CNC Twin Spindle Turning Center with Program Select Switch, High Speed Gantry Loader, Coolant System, Work Clamp Confirmation – Both Sides and Rear Discharge Chip Conveyors
155 Ton X 10' CNC Hydraulic Press Brake with Cybelec DNC 60 Control, Power X Manual R, Z1, Z2 and Flush Floor
10,000 LBS Capacity Forklift with Cushion Tires, Diesel Powered, Two Stage Mast, Side Shift, Mast Tilt, 47” Forks, 1F - 1R Gears and Canopy
5’ X 10’ Laser Cutting System with 840D Siemens Sinumerik Control, Chiller and Dust Collector.
60" X 26" Vertical Machining Center with CAT 50 Spindle Taper, 30 Position Tool Changer, Programmable Coolant, Probing Renshaw OMP 40-3 PROBE, New Belts & Motor Mounts, Rebuilt Spindle, New Battery Pack, Chip Auger and 30 HP 2 Speed Geared Drive
5 Kg Robot with R-J3ib MATE Controller and 6 - Axis
1/4" X 12' Hydraulic Shear with Programmable Backguage and Material Ramp
5' X 12' CNC Router with Mister, Auto Squaring, HC Pressure Foot, Cold Gun, Automatic Tool Changer and Busch Minke 1252 Vacuum Pump
500 Ton X 17' Hydraulic Press Brake with 3' Horn Extension On Right Hand Side and 4-Way Die
175 Ton X 12’ CNC Hydraulic Press Brake with ETS-200 Back Gauge for X and R Axis Pedestal Controls
90 Ton X 8’ Hydraulic Press Brake with Upgraded Cincinnati CNC Controller, 2 Axis Backgauge, Die Rail, Dual Palm Button Floor Standing Operators Pedestal, 3 Ram Speeds and Manual Depth Stops for Ease of Operation
31.50” X 39.90” Capacity Dual Spindle Vertical CNC Turning Center with Fanuc CNC Controller, 2- 31.5" 50HP Driven 3-Jaw Chucks (1-1500 RPM), Rear Discharge Lift-Up Chip Conveyors, 2-Automatic Power Doors, Chip Blaster Ultra High Pressure Coolant @ 2000 PSI, 2-Speed ZF-Gear Box Motors. 2 Available. Inspect in NE Plant
90 Ton X 8’ Hydraulic Press Brake with Upgraded Cincinnati CNC Controller, 2 Axis Backgauge, Die Rail, Dual Palm Button Floor Standing Operators Pedestal, 3 Ram Speeds and Manual Depth Stops for Ease of Operation
350 Ton X 18' Hydraulic Press Brake with Dual Palm Buttons Controls, Top Rail Die Clamps, Light Curtains, Electric Foot Pedal and E-Stop Button
350 Ton X 12’ Hydraulic Press Brake with 6 Axis Adaptive Auto Form Control, Palm Buttons, CNC Backgauge, Bed Crowning, Foot Pedal and Light Curtains
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19” Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked Dual Rails and Hypertherm PowermaxSYNC 85 85 AMP Air Plasma System
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19” Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked Dual Rails and Hypertherm PowermaxSYNC 65 65 AMP Air Plasma System
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19” Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked Dual Rails and Hypertherm PowermaxSYNC 105 105 AMP Air Plasma System
38MM Capacity Swiss Style 12 Axis CNC Turning Center with the Fanuc 31i-B5 CNC Controller, FMB 3-38 Turbo Barfeeder, Live Tool Holders & Platen Toolholders Included
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19” Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked Dual Rails and Hypertherm Powermax125 125 AMP Air Plasma System
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19” Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked Dual Rails and Hypertherm MaxPro200 200 AMP Air Plasma System.
28.7" X 28.7" X 33.5" CNC 4-Axis Horizontal Machining Center with MSX-701IV Control, Hi Pressure Coolant Thru Spindle and 60 Station ATC
118” X 82.3” X 30” CNC Gantry / Bridge Mill with Fanuc 18-MB CNC Control, ATC 32, Taper CAT 50, Coolant Tank and Pump and Chip Conveyor
6” X 24’ Plasma Tube Processing Center with CNC Windows PC Control, 3 - Servo Driven Axis (X, A, Z), Hypertherm Powermax 85, Scribing and Torch Rebuild Kit
5.9" X 255" Tube Laser with Siemens Sinumerik 840D CNC Control, TLF 3200 Power Supply, Auto Load Center and Chiller
165 Ton X 10' CNC Press Brake with Pendant Mounted Control for 40" Power Back Gauge, Manual Anti-Deflection Table, Die Riser and Electric Foot Pedal
1/4" X 10' Hydraulic Shear with 36" Wysong PC100 CNC Backgauge, Parts Conveyor, 2-Front Arm Supports, Quick Change Blade Gap Adjustment and 120" Squaring Arm
175 Ton X 10′ CNC Press Brake with ETS 3000 CNC Graphical Controller Programmable Y, X and R Axis. Includes operator Workstation with Integrated Footpedals and Light Curtains
176 Ton X 13' Hydraulic Press Brake with KPAPPS 3 Control, 3-Axis Backgauge, Foot Pedal, Palm Buttons, Laser Safe, Light Curtains and Bed Crowning Adjustment
42" X 40' Plasma Pipe Cutter with 40' Head Travel, 4 Axis and 90' of Infeed & Outfeed
6.5’ X 13’’ CNC Waterjet Cutting System with Flow PC Based Controller Running FlowMaster V6.0 and FlowXPert Software Suite, Dynamic Countor Control, Active Tolerance Control, Paser 4 Swiveless Cutting Head and 50 HP / 60,000 PSI Pump
35.4" X 19.7" X 19.7" CNC Vertical Machining Center with Makino Pro 3 CNC Control (Fanuc 18i), 20 ATC Tool Changer and CAT 40 Spindle Taper
11.81" X 17.7" CNC Turning Center with Okuma OSP P300L CNC Control, LNS Move 2 Barfeeder, Live Tooling, Tool Setting Probe, Programmable Tailstock, 10" 3 - Jaw Power Chuck, 12 Position ID/OD Tool Turret, Chip Conveyor and Coolant System
33.88" X 27.5” CNC Turning Center with Mazatrol PC-Fusion-CNC 640HT Pro Control, 12 Position Drum Turret, Programmable Tailstock, Auto Lube System, Multitap Transformer and Chip Conveyor Side Disposal
10" X 20" Precision Toolroom Lathe with Center Morse Taper #2 and 4,000 RPM Spindle
22.05" X 24.02” X 22.02" Horizontal Machining Center Cell with M-Plus Controller, Full 4th Axis, 60 Tool Magazine and 12,000 RPM
6’ X 13’ Waterjet Cutting System with CMC Burny Phantom ST CNC Control, Jet Edge 55-50C Intensifier and 3-Axis Abrasive Cutting Head
13' X 22' 5 Axis Twin Table Waterjet System with Portable Control Unit with Remote Commands up to 6 Axes, Power 60 (45) HP (kW) and Pressurized Abrasive Conveying System
6’ X 12’ Capacity 5-Axis Waterjet Cutting System with PC-Based Omax CNC Controller, Enduromax 30 HP 50,000 PSI Pump, Tilt-a-Jet Programmable Taper Compensating Cutting Head, Programmable Z-Axis and 300 LB Abrasive Hopper
48" X 48” 2KW (1,000 Watts) CNC Laser Cutting System with Fanuc 160iL Control, Digital AC Servo Drives, 1KW Fanuc AF1000E Resonator and Torit Downflow Dust Collector
150 Ton Piece-Maker Geared Straight Side Press with Motor / Electrics / Controls, T-Slotted Bolster, T-Slotted Slide, Air Clutch and Brake
165 Ton X 10’ Hydraulic Press Brake with FastBEND Premium CNC Controller with Multi Touch Function, CNC Crowning, Quick Manual Clamping System for European and USA Tooling, 2-Moveable Front Arm Supports and Laser Light Guard
⅜” X 10’ Hydraulic Shear with CNC SC100T Pendant Control, Squaring Arm, Swing Away Back Gauge, Automatic Blade Gap Adjustment and Shadow Light
5" X 12" Grinder with Electrical Console Control, Automatic Lubrication for Wheel Head and Carriage Ways, Infinitely Variable Work Head Spindle Speeds, Automatic Cycle / Manual Operation Selector, Sparkout Timer, Automatic Hydraulic Rapid Advance Retraction of Grinding Wheel Head, Variable Dwell at Each End of Table Movement, Automatic Infeed and Hydraulic Table Traverse
60 Ton Punch Press with Dual Palm Button Control, Black Max Light Curtains, Vibrashock Isolation Pads, Inch / Single / Continuous Modes, Air Clutch and Brake.
75 Ton OBI Punch Press with Dual Palm Button Operation, 4” Stroke, Variable Speed, Wintriss DiPRO 1500 Die Protection System, Automatic Lubrication System and Air Clutch and Brake with Selector Control
3/4" X 12' Shear with Accurshear Front Operated Power Backgauge, Power Stroke Length Control, Squaring Arm, Oil Cooler and Electric Foot Pedal
35 Ton Bliss Model C-35 Flywheel Type Obi Press with Wintress Controls, Palm buttons, 3" Stroke, 90 SPM and Air Clutch and Brake
200 Ton X 12' CNC Hydraulic Press Brake with Delem Da 51 CNC Control, Y1 / Y2 Ram Positioning, Hurco Back Gauge, Sectional Ram Clamps and Electric Foot Switch / Palm Button Station
175 Ton X 14’ Cincinnati Hydraulic Press Brake with Dual Palm Buttons, Electric Foot Trip, Tonnage Control and is Milled and Drilled for Angles
240 Ton X 12' Press Brake with PC800XD Touch Screen Controls, Wila CNC Crowning System, 4 - Axis Backgauge, Large Bottom Table for Wide Multi V Dies, Universal Quick Release Top Tool Clamping, Sliding Front Sheet Support Arms (X2) and AKAS II Front Laser and Rear Light Curtain
6" X 4.5" CNC Turning Center with 2 Main Spindles and 12 - Post Tool Turret
3/8" X 12' Shear with SC100T Shear Control with Touch Screen, Squaring Arm, Pendant Control Panel, Standard Hold Downs and 40" Swing Away Back Gauge
1/2" X 12' Hydraulic Shear 36" Front Operated Back Gauge, Squaring Arm, Front Arm Support, Foot Pedal and Ball Transfers In Table
31.1" X 29.9" X 33.1" Horizontal Machining Center with MSC - 502 Control Panel, CAT 50 Tool Holders, Full 4th - Axis, Coolant Thru Spindle, Cool Jet High Pressure Coolant System, Remote Pendant and Chip Conveyor
20 Ton X 39.37" X 50" Turret Press with Amadan 04PA CNC Control with CRT
4.5" X 25' 1.5 KW Tube Laser with Tube Cut CNC Control System, Ray Tools 3D Autofocus Head and Automatic Loader
175 Ton X 12’ Hydraulic Press Brake with Dual Palm Buttons, Electric Foot Pedal and Ram Adjustment
33” X 80” Manual Lathe with Newall C80 DRO and 32” 4 Jaw Chuck
660 Ton Servo Press with Servo Drive and Komatsu Transfer System
200 Ton X 12’ CNC 3 Axis Hydraulic Press Brake with Cybelec DNC 880S Control, 8” Stroke and Light Curtain System
12' X 20' CNC Hi Definition Plasma Cutting System with Messer Global Plus CNC Control, HPR-260 Precision High Definition 260 Amp Power Source, Precision Arc Writer Plasma Engraving System and Manual Gas Console
190 Ton X 10' 6 Axis Hydraulic Press Brake with Delem DA-66W CNC 6 Axis Control, Remote Dual Palm Control Stand, Oil Cooler and Electric Foot Pedal
10' X 26' CNC Plasma and Oxy Table with Messer CNC Controls, (2) Hypertherm HT4400 Heads, (5) Oxy Heads, Slagger Table and Torit Dust Collector
5' 6" X 21' 6" Plasma Cutting Machine with M3 Plasma Control System, 3 - Axis Gantry Style, Rack and Pinion Drive System, EPP 360 Power Supply, Water Injection Module, PT-36 Torch and Tool Kit, CC-11 Water Cooler, Torit DF02-8 Dust Collector and Downdraft Table
220 Ton Servo Press, 9.94" Stroke, 4.72” Adj. 50 SPM and Flush Floor
121 Ton Gap Press with Wintress Smart PAC Controls, 4.3" Stroke, Air Clutch & Brake and Air Counter Balances
4’ X 8’ CNC Waterjet with Omax Windows 7 Based Controls, 55,000 PSI, Meyers Pump P3055V, Koolant Kooler HAF 1000.
55.18" X 55.18" X 157.48" Flat Bed CNC Lathe with Siemens 840C CNC Control, 37/68 HP Spindle Motor, 4 Position Turret, 31.5" - 4 Jaw Manual Chuck, Heavy Duty Tailstock and a Set Of Steady Rests
50" X 25" X 24" Vertical Machining Center with Centurion 7 CNC Control, 15 HP Spindle, 24 Tool ATC with Twin Arm Changer, 40 Taper Spindle with 8000 RPM and Chip Auger
3" X 3" X 3/8" Angle Roll with Separate Movable Control Panel, Correcting Rolls with Movements in 3 Dimensions and Hydraulic Adjustments of Bending Rolls
90 Ton X 8’ Hydraulic Press Brake with Hurco 7 CNC Controller, 2 Axis Backgauge, Die Rail, Dual Palm Button Floor Standing Operators Pedestal, 3 Ram Speeds and Manual Depth Stops for Ease of Operation
1.73" X 10' 4-Roll Hydraulic Plate Roll with CNC Controls, Hydraulic Drop End, Pedestal Control Stand, Powered Rear Roll and Rectilinear Guides
200 Ton Double Crank Gap Frame Press with Palm Buttons, Air Clutch & Brake, Air Counterbalance, Floor Standing, T-Slotted Ram and Bolster
220 Ton Punch Press with 36" X 60" Bed, 12" Stroke, 23" Shut Height, T-Slotted Ram and Bolster
90 Ton X 10' CNC Press Brake with 8' 6" Distance Between Housings, 8” Stroke and 7” Throat Depth
10’ X 11 GA Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
6’ X 9/32" Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
300 Ton Hydraulic Press Brake with PC Controls PC800 CNC Backgauge and 30" Power Backgauge
350 Tons X 14' Hydraulic Press Brake with Cinci CNC Proform Control, 12 9' Inside The Housings, E-Stop Button and Dual Palm Buttons Control
150 Ton Bliss 2-Point Gap Frame Press with 72" X 30" Bed, 8" Stroke, 25-50 SPM, Dual Palm Buttons, Air Counter Balance, Air Clutch, Link Light Curtains, Link Tonnage Monitor, Flush Floor No Pit Required, T Slots In Bolster and Ram
165 Ton Komatsu Gap Frame Press with 9.85" Stroke, 18.7” Shut Height, 27.56" X 21.65" T-Slotted Ram, 49.21" X 31.5" Bed, 27-55 SPM, Air Clutch, Air Counter Balance Cylinder, Hydraulic Overloads and Dual Palm Buttons
150 Ton Minster Rigid Gap Frame Punch Press with Air Clutch and Brake, 10" Stroke, 26.25" Shut Height, 50" X 30" Bed, Air Counterbalances and T-Slotted Ram
150 Ton Rigid Gap Frame Punch Press with Ceico Controls, Dual Palm Buttons, 10” Stroke, 50" X 30" Bed, 20" Shut Height, Air Clutch and Brake, 20-40 SPM, Air Counterbalances and Cushion
1/4" X 12' Hydraulic Shear with Servo Driven Allsteel Control, 36" CNC Controlled Front Operated Power Back Gauge, Squaring Arm, 2-Front Arm Supports and Table Cut Outs
175 Ton X 122" CNC Hydraulic Press Brake with Delem 53 T 2D Control, X Axis Back Gage, Manual Lower Table Crowning, Light Barrier, European Type Male Die, 2 Front Supports, European Style 4 Way Die, and Adjustable Back Gauge Fingers
5' X 10' Plasma with 90 Amp Komatsu G990 Control Unit: LCD Display, Alpha-Numeric, Keypad, Joystick and Torch Height Control Setup Probe
7’ X 10’ Hi-Definition Plasma Cutting System with the Messer Global Touch Screen CNC Controller, HPR300XD Plasma Power Sources, Downdraft-Ducted Self Cleaning Table, Programmable Torch Spacing, Digital Alignment Camera, AC for Control Cabinet and Dust Collector with Spark Trap
10,000 LB HD-100A with Hand Pendant Control and 48” Square Table
6’ X 12’ CNC Abrasive Waterjet Cutting System with Mitsubishi M720 CNC Controller, On Board Metamation CAD/CAM System, Ultra-High Pressure 60KPSI KMT Intensifier Pump, Complete Ebbco Closed Loop Water Filtration System, Chiller and Ebbco Abrasive Removal System
10,000 LB Capacity Welding Positioner with Hand Pendant Control and 42” Round Table
21" X 31.5" Horizontal Bandsaw with 12' Material Feeding Table and Mitering Capabilities
45 Ton X 9.84" Horizontal Press Brake with NC controls, Manual Backgauge, Quick Releasing Tooling System, 80 mm V-Die and Post, Product Counter, 2-Button and Foot Pedal Control
5’ X 10’ CNC Waterjet Cutting System with Calypso Windows 10 Based PC CNC Controller, 30 HP 60KPSI KMT Intensifier Pump, 600 LB Bulk Abrasive Hopper, HP Tubing and Manuals
33 Ton X 50” X 72” CNC Punching System with Amada 18P
Controller, 45 Position Thick Style Turret with (2) AutoIndex Stations and Auto
1/2" X 20' Cincinnati Hydraulic Heavy Duty Shear with Front Operated Powered Back Gauge, Ball Transfers In The Table, Table Cut Outs and Electric Foot Pedal
10' X 1/2" Mechanical Plate Roll with Hand Control, Initial Pinch, 12" Diameter Roll, Air Drop End, Power Rear Roll Adjustment and 440V / 3 Phase
35 Ton X 6' Hydraulic Press Brake with Hurco Autobend 6 Control Two Axis Back Gauge, Sectional Ram Die Clamps (10 Universal Die Adapters), Push Buttons for Start - Stop, Key Selector Switch for Inch - Single Stroke Auto, Manual Return, Tonnage Control and Indicator
45 Ton C-45 Flywheel Type OBI Press with 3" Stroke, 12.5" SH, V/S Drive 40-120 SPM, Air Clutch and Single Crank
1/2" X 10' Hydraulic Power Shear with Front Operated Power Back Gauge with Indicator, Square Arm, Hand Cut-Outs in Table, Ball Transfers in Table, Solid Table and Foot Pedal
84” X 96” Heavy Duty Chuck Surface Grinder with 1/2" Chuck Life That Extends To The Edge Of The Chuck
: 1/2" X 12' Hydraulic Power Shear with SC100T Touch Screen Control
with Robosoft Software, Motorized 40" Back Gauge, Swing Away Back Gauge, 40"
Squaring Arm, 20" Plate Support, Ball Transfers and Cutting Line Illumination
1/2" X 13', 42" CNC Powered Back Gauge, 10' Squaring Arm, Sheet Supports, Foot Pedal, Spare Blades and Roller Bearing Table
10,000 LBS Capacity at 12″ Center Of Gravity Welding Positioner, 48” Square Table with Hand Pendant Control, 480v-3 Phase Input Power, Manual Adjustable Height From 44.5” To 74.5” In 6” Increments, Variable Speed Rotation From .04 To 1.0 RPM and 135° Constant Speed Power Tilt
1/2 x 12' Shear with AUDEMI PGP-401 Touch-N-Go Control, 48” Back Gauge, 10' Squaring Arm, Sheet Support System, Ball Transfers in Table, Variable Rake Angle Adjustment and Rapid Blade Gap Adjustment
400 Ton X 20' Press Brake with Cybelec DNC 15 CNC 3-Axis Backgauge, 4 - Way Die, Hydraulic Downstroking and Portable Foot Pedal
90 Ton X 12' Hydraulic Press Brake with Hurco Autobend 7, Narrow Filler Block, Electric Foot Switch, Dual Palm Buttons, Interlocked Construction and Clevis Mounted Self Aligning Cylinders
135 Tons X 13’ Press Brake with ESTUN E21 CNC Controller, Front Sheet Support, European Precision Style Manual Tool Clamps, Light Curtain System, Piranha X and Manual R Back Gauge System, Precision Ground Die Rail with Hold Down Bolts.
176 Ton X 10’ Press Brake with DNC 60 CNC Cybelec Control (Y1, Y2) Independent Synchronized Beam Control, 2 Axis, Top Tool Clamping for N.A & European Style Tooling, AKAS Laser Type Beam Safety, CNC Crowning, Light Curtains and Full Set of Punch Holders
Rebuilt 6’ x 12’ CNC Abrasive Waterjet Cutting System with Flowmaster PC Based Controller, Dynamic Cutting Head, 50HP, 60K PSI Hyperjet Intensifier Pump and Abrasive Hopper. Rebuild includes: New X-Axis Ball Screw, PMAC Boards, Contacts, Solenoids, Fresh Pump Rebuild, Repaired and Refinished Cutting Tank/Table, New Paint & Graphics Package
1/4" X 12' Hydraulic Shear with CNC Control, Squaring Arm, Front Operated Power Backgauge With Indicator Inlaid Fractional Table Scales, Electric Stroke Control, Manual Knife Clearance Adjustment, Finger Guard, Auto Lubrication and Guarded Footswitch Hydraulic Hold Downs
1/2" x 10' Hydraulic Shear with 10' 1/2" Cutting Length, 48" CNC Control, Flush Floor and Flip Up Back Gauge
1/2” (0.500“) X 10’ (120”) Hydraulic Shear with Front Operated Back Gauge Controls and 2-Front Arm Supports
3" x 13’ CNC Multi-Axis Tube Bender with BLM VGP 3D PC Based Control, 13 Axis ( X1, Y1, Z1, 01, Y2, V1, V2, W3, W4, V4, U4, U2, U1), Max. Radius 7.87", LCD Color Screen, Function Keyboard with E-Stop, Alpha / Numeric Keyboard, Pedestal Control with Foot Pedal, E-Stop Enclosure and Optional Hitch Feed
110 Ton Single Point Back-Geared OBI Punch Press with 28" x 21" T Slotted Flanged Ram Size, 42" x 27" T Slotted Bed Size, 8" Stroke, Power Ram Adjustment 20-40 SPM Variable Speed Drive, 17 Shut Height, Combination Air Clutch & Air Brake, Air Counterbalances and T-Stand Dual Palm Buttons
1/2" x 8' CNC Plate Roll with AK400 CNC Controls, Variable Speed, Induction Hardened Roll, Cone Bending Device and Prepared for Side and Top Support
5' X 10' Plasma Cutting System with ESAB CNC Control w/ Read Out, ESAB 100 AMP ESP-101 Power Supply Console, Software for Drilling, Dual Side Drive and Downdraft Table
55 Ton Ironworker with 4 Workstations (Punch, Flat Bar Shear, Angle Shear, 10" Brake), 4 - Way Die Allowing 1/16", 1/8", 3/16" and 1/4" To Be Formed to a 90° Angle, Oversized Punch Assembly, 10" Brake and Powerlink
49.21” X 98.4” X 22 Ton 1/4” Material Capacity CNC Turret Punching System with Fanuc 18P CNC Controller, 29 Station Thick Style Turret with 3 AI (Auto-Index) Stations and Brush Type Table
5/8" X 20' Capacity Hydraulic Power Squaring Shear with Programmable Accurshear SC2 Controller with 48" Programmable Backgauge, Accurshear CNC front gauging with 10' Squaring arm and Dual 6' Front Supports, Material Conveyor/Stacker, High Speed Hydraulic System, Light Curtain, Shadow Light, Hand Slots in Table, T-Slot in Table Front, Ball Transfers in Table, Oil Cooler and Power Quick Blade Gap Adjustment.
38 Ton X 5’ CNC Hydraulic Press Brake with Autogauge CNC 1000 Controls and Autogauge G24 Heavy Duty Backgauge
110 Ton X 10’ Capacity Hydraulic Press Brake with Sectional Ram Clamps and Variable Tonnage, Full Length Foot Operated Tredal, Lower Die Rail, Manual Back Gauge, Upacting Ram and (12) Upper Die Hold Downs
100 Ton Ironworker with Four Available Workstations (Punch, Flat Bar Shear, Angle Shear, 1 Open for Optional Attachments), High Capacity Angle Shear and Electrical Stroke Control
175 Ton X 12' Press Brake with 144” Overall Length Of Bed and Ram with 7 Axis Cybelec DNC 90 CNC Back Gauge, Die Rail, Automatic Crowning, Wila Upper Tool Clamping, Hours Meter, Auto Lube System and Remote Foot Pedal
5’ X 10’ Abrasive Waterjet Cutting System with Mitsubishi CNC Graphical Controller, 50 HP KMT 60K PSI (60,000 PSI) KMT Intensifier Pump, Chiller, Water Filler, Weir Tank (Ebbco), Bladder Tank (Ebbco), Control Pedestal & Software, Tool Box with Spare Parts, Grease Gun & Mobile Cart and Operator / Owners Manuals
4' X 8' Fiber Laser with Vytek CNC Controls, Manually Operated Transfer Table, and Complete Manuals
50 Ton Ironworker with Electric Foot Pedal with Integrated Jog Control, 4 Work Stations (Punching, Flat Bar Shear, Angle Shear & Copper Notcher), Adjustable Electric Stoke Control
36" X 60" Abrasive Finisher with Spinner Hanger, (2) 10 HP Shot Wheels and Dual Station
12.6” Diameter X 29.5’ Long Automated Fiber Tube Laser Cutting System with the Fastcut CNC Control System, 2KW, 3KW, 4KW and 6KW IPG Laser Power Source Options, Standard with 3 Chucks Instead provides for additional Length Capability and NO Remnant. Tubes Up To 8.86" and Optional 12.2" Round Tube Diameter and Up to 29.5' Long can easily be processed. Configured with the IPG Laser Resonator and PRECITEC Cutting Head for top of the line performance and serviceability.1102 LBS Loading Ability and Auto Loading/Unloading for complete untended operation.
242 Ton X 12' Press Brake with Delem DA-58T Controls, CNC Controlled Strong 800 MM Backgauge, Adjustable Height and Sliding Front Support Arms, Top and Bottom Tools are Surface Hardened by Special Treatment, Promecam Quick Clamping System, 2 - Piece Back Gauge Fingers and Scales in Metric and Inches
1/4" x 10' Shear with SP 9 Front Operated Motorized Back Gauge, Squaring Arm, Hold Downs, Blade Gap Adjustment, 1 Position Pre-Selection Control From the Back Gauge with Digital Readout, 7-Segment LED Displays, Pre-Selection of Electro-Hydraulic Cutting Angle Setting with Read-Out, Pre-Selection of Cutting Length, Programmable Retraction, Manual Blade-Gap Setting, (Preset) Stroke Counter Up Or Down with 0-Stop, Mm or Inch, 18 Hold Downs, Finger Protection with Hand Gaps Guards Between Hold Downs, Motorized Back Gauge 40", 2.1 Inch/Sec Ball Screw Guide Standard Plates Supports 20" and 3 Ball Transfer Units, Cutting Line Illumination and Set of Blades for Stainless Steel
5’ X 10” Waterjet with Bystronic CNC Control, 50 HP pump (Replaced In 2020) and Maximum Cutting Pressure 60,000 PSI, Dual Cutting Heads, Auto Precision Cutting and Abrasive Hopper
Bliss 45 Ton OBI Punch Press with 15” X 9” Ram Size, 29” X 18” Bed Size, 3" Stroke, 13-1/4" Shut Height, Air Clutch & Brake, Air Counterbalances and Dual Palm Buttons
FULLY REFURBISHED - 10’ X 20’ CNC Abrasive Waterjet Cutting System with Current Calypso PC Based Controller System, NC Geomate/Console Operating System, 100HP 60KPSI Calypso Intensifier Pump, 600 LB Bulk Abrasive Hopper - Installation, Training, Updated Software & Warranty Included
13.7" X 20.4" Turning Center with Fanuc 0iTC CNC Control, 20 HP Spindle Motor, Tool Presetter, Tailstock, Parts Catcher, Chip Conveyor and MTA International Super 80 Barfeeder
217 PSI X 109 CFM 40 HP Nitrogen Generation System for Laser Cutting Machinery, 95% Purity Rating, Combined Compressor/Dryer, 30 Gal Receiver Tank, Manual Switch Nitrogen to Air Assist Gasses.
⅜” X 12’ Hydraulic Power Squaring Shear with Cincinnati CNC Shear Controller, Programmable Rake Angle, CNC Front Gauging with Blade Gap and Back Gauge Positioning with Swing Up 36” Back Gauge, 6’ Squaring, Arm and Dual Foot Pedals for Dual Operation
6,600 LBS X 10’ Ø Conventional Rotator with Digital Speed Indicator, Manual Diameter Adjustments, “PU” Rollers Absorbing Shocks and Vibrations and Adjustable Rotation Speed
175 Ton X 10’ Hydraulic Press Brake with Cincinnati HMI Industrial PC Base Control with 15.1” TFT Touchscreen Display, 24” 2 Axis Gauge, Electric Foot Switch, Palm Button Station, Precision Ram Leveling with Dual Linear Glass Scale Encoders Off Load Center Compensation
5’ X 10’ and 6’ X 13’ Sheet Laser Sizes Available with High End Fiber Laser, All Premium Running Gear, Hydraulic Lifting System On Shuttle Table with High Pressure Servo-Control Valve For Gas Control Without User Intervention
4.25' X 4.25' X 4.0” Sheet Laser with 2000 Watt IPG Resonator, Ray Tools Laser Head, Completely Enclosed, 55” Per Second Max Speed and FSCUT2000S Control
10’ X 5’ Fiber Laser with 2,000 Watts, IPG Resonator, Parallel Shuttle Table, 1.4G Positioning Acceleration, Cypcut Control System, IPG Advanced Fiber Laser, Automatic Telescoping Enclosure, Air Blower, Water Chiller, Optional Tube Cutting Attachment, Installation, Training and 2 Year Warranty
90 Ton X 10’ Press Brake with Hurco AutoBend 7 CNC 2-Axis Back Gauge and Ram Control, Lower Die Rail, Adjustable Tonnage Control, Adjustable Stroke and Speed Change with Position Indicator, Micrometer Ram Tilt Adjustment, Palm Buttons Mounted On Machine Face, E-Stop, Bed / Ram Machined For Angles, Full Set Of Manuals and Remote Foot Pedal
2.36” X 120” Hydraulic 3-Roll Plate Roll with Hydraulic Drop End, Independently Powered Hydraulic Rolls, Variable Rolling Speeds, Hydraulic Roll Adjustment, Induction Hardened Rolls, Cone Rolling Package and Digital Display
22” X 22” X 23.6” Horizontal Machining Center with CNC Control Professional 3, 2 Pallets, 14,000 RPM, Cat 40 Tooling, 225 Slot Tool Magazine, Oil Temp Regulating System, Chip Conveyor, Dual Filter Coolant System, Through Spindle Coolant, Air Dryer, Scrap Conveyor, Linear Bearings, and Full Set Of Manuals
¼” X 10’ Hydraulic Shear with SP8 Controls, Motorized Backgauge, 42” Squaring Arm, Rake Angle Adjustment, Blade Gap Adjustment, Hold Downs and 2 New Sides Left On Knives
48” X 20” CNC Miter Bandsaw with BT CNC Controls, Minimum Quantity Lubrication, Integrated Hydraulic Power Unit, Hydraulic Clamping Vice and Integrated Chip Conveyor.
25" X 28" Vertical Bandsaw with 45° Tilt (Left or Right), Hyd. Vise, Power Tilt, Power Blade Guide, Coolant System, Chip Conveyor, Powered 9' Infeed and Powered 9' Exit Roller Tables w/ Inch and Rapid Control, Powered Lift Rollers Left and Right Side of Table and All Available Manuals.
2-1/2" X 0.120" Mandrel Tube Bender with Foot Pedal Control, Servo Controlled Bending, Feeding, Shifting and Turning Axes, Operational Ability With and Without Mandrel, Spiral Bending, Hydraulic Oil Cooler, Automatic Mandrel Lubrication, Motion Controller System, 3D Preview of Entered Bending Program and Programming in YBC Mode
49.21” X 98.4” X 20 Ton CNC Turret Punching System with Fanuc Series Oi-PC CNC Controller, 21 Station Thick Style Turret with 3 AI (Auto-Index) Stations, Brush Type Table and All Tooling Included.
3/4" x 12' Capacity, 12'L Table w/ ball rollers, 10' 7"L Squaring arm, 2' 7"L Support arm, 4' Front operated back gauge, Rear catch rack, Dial in material thickness & material length, Digital readout, Stroke counter, Adjustable auto hydraulic rake/taper, Electric trip pedal.
5’ X 10’ 3,500 Watt CNC C02 Laser Cutting System with Mitsubishi Control, Pallet Changer, Chiller
240 Ton X 12' 1” Hydraulic Press Brake with Delem 58T Control, Adjustable
Front Supports, Illuminated Work Area, AKAS II Laser Safety. WILA Manual Crowning, Rigid Rack & Pinion Back Gauge, Full Length Segmented Tooling and Quick Release Punch Clamps.
4' X 4' CNC Abrasive Waterjet Cutting System with P.C. Controller, 40,000 PSI, 40H.P Abrasive Hopper 4' X 4' CNC Abrasive Waterjet Cutting System with P.C. Controller, 40,000 PSI, 40H.P Abrasive Hopper.
8’ X 15’ CNC Waterjet with Flowmaster Windows Based Control, Integrated Flying Bridge, Dynamic XD Waterjet - Dynamic 3D Waterjet, Hypertension Technology, 50 HP Hyperjet 87,000 PSI Intensifier Pump Flow International 9’ X 16’ Table and 5 - Axis Motion Head.