13 - 3/8" X 40" Engine Lathe with 3 - Jaw Chuck, Lever Operated Collet Closer, Coolant System, Worklight, Quick Change Toolpost with Holders, Thread Dial, Foot Brake and One Shot Lubrication System.
40” Swing (51” with Gap Removed) X 200” Manual Gap-Bed Engine Lathe with 6” A2-11 Camlock Spindle Bore, 30HP Drive Motor, 16 Speed Gear Drive, Tailstock, Follower Rest, 13.2” Swing Over Cross-Slide, 4 Jaw 16” Chuck, Coolant System and Splash Guarding, Face Plate, Steady Rest, 4-Way Tool Post, Halogen Work Light and Tool Kit Included.
22” Swing (31” with Gap Removed) X 80” Manual Gap-Bed Engine Lathe with 4.5” D1-11 Camlock Spindle Bore, 15HP Drive Motor, 12 Speed Gear Drive (Digital Variable Speed Drive Available), Tailstock, Follower Rest, 13.2” Swing Over Cross-Slide, 4 Jaw 16” Chuck, Coolant System and Splash Guarding, Face Plate, Steady Rest, 4-Way Tool Post, Halogen Work Light and Tool Kit Included.
18.5” Swing (27.125 with Gap Removed) X 86” Manual Gap-Bed Engine Lathe with 3” D1-8 Camlock Spindle Bore, 7.5HP Drive Motor, 12 Speed Gear Drive (Digital Variable Speed Drive Available), Tailstock, 11” Swing Over Cross-Slide, 3 Jaw 10” Chuck, Coolant System and Splash Guarding, Face Plate, Steady Rest, American Style Tool Post, and Tool Kit Included.
18.5” Swing (27-⅛” with Gap Removed) X 60” Manual Gap-Bed Engine Lathe with 3 1/16” D1-8 Camlock Spindle Bore, 7.5HP Infinitely Variable Speed Drive (20-2000RPM), Tailstock, Follower Rest, 3 Jaw 10” Chuck, Coolant System and Splash Guarding, 16” Faceplate, Steady Rest, 4-Way Tool Post, Halogen Work Light and Tool Kit Included.
18.5” Swing (27-⅛” with Gap Removed) X 60” Manual Gap-Bed Engine Lathe with 3 1/16” D1-8 Camlock Spindle Bore, 7.5HP Drive Motor, 12 Speed Gear Drive, Tailstock, Follower Rest, 3 Jaw 10” Chuck, Coolant System and Splash Guarding, 16” Faceplate, Steady Rest, 4-Way Tool Post, Halogen Work Light and Tool Kit Included.
16” Swing (24” with Gap Removed) X 60” Manual Gap-Bed Engine Lathe with 3 1/16” D1-8 Camlock Spindle Bore, 7.5HP Drive Motor, 12 Speed Gear Drive (Digital Variable Speed Drive Available), Tailstock, Follower Rest, 8.75” Swing Over Cross-Slide, 3 Jaw 10” Chuck, Coolant System and Splash Guarding, 16” Face Plate, Steady Rest, 4-Way Tool Post, Halogen Work Light and Tool Kit Included.
16” Swing (24” with Gap Removed) X 60” Manual Gap-Bed Engine Lathe with 3 1/16” D1-8 Camlock Spindle Bore, 7.5HP Drive Motor, 12 Speed Gear Drive (Digital Variable Speed Drive Available), Tailstock, Follower Rest, 8.75” Swing Over Cross-Slide, 3 Jaw 10” Chuck, Coolant System and Splash Guarding, 16” Face Plate, Steady Rest, 4-Way Tool Post, Halogen Work Light and Tool Kit Included.
16" X 40" Capacity Manual Engine Lathe with 2,000 RPM 7.5HP, DIGITAL VARIABLE SPEED DRIVE, D1-8 Camlock Spindle, 3-1/16" Spindle Bore, 10" 3 Jaw Chuck, Gap Bed Frame,Coolant System, Full Length Splash/Chip Guard, Foot Brake, Halogen Work Light and Tailstock.
16" X 40" Capacity Manual Engine Lathe with 12 Speed 40-2,000 RPM 7.5HP Spindle Drive, D1-8 Camlock Spindle, 10" 3 Jaw Chuck, Faceplate, Steady Rest, Follower Rest, American Tool Post, Coolant System with Full Length Splash Guard, Foot Brake, Halogen Work Light, Tailstock and Tool Kit.
14" X 40" Capacity Manual Engine Lathe with 1,800 RPM 3HP, 2-Speed Gear Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single or 3 Phase Electrics, Coolant System Foot Brake and Tailstock.
14" X 40" Capacity Manual Engine Lathe with 2,200 RPM 3HP, Infinitely Variable Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single or 3 Phase Electrics, Coolant System Foot Brake and Tailstock.
13" X 40" Capacity Manual Engine Lathe with 2000 RPM 3HP Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single Phase Electrics, Coolant System Foot Brake and Tailstock.
11" x 18" Precision Toolroom Lathe with 5HP 4,000 RPM DIGITAL VARIABLE SPEED (D.V.S.) Drive System, 50 Millionth Tir Accuracy, Harding Type Design, Hardened and ground spindle, Independent electric feed-rate control on carriage and cross slide, Quick-change inch/metric gearbox with 36 changes, Spindle supported by double angular contact bearings, Quick-action compound slide for threading, One piece alloy steel material, hardened and ground bedways and Hardened and ground leadscrews.
