13" X 40" Capacity Manual Engine Lathe with 2000 RPM 3HP Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single Phase Electrics, Coolant System Foot Brake and Tailstock.


STANDARD EQUIPMENT:

  • 3-Jaw 8” Chuck
  • Removable Gap
  • Steady Rest (Capacity = ¼” – 3-3/4”)
  • Coolant System
  • Splash Guard
  • 4-Way Tool Post
  • 6” Diameter Back Plate
  • Threading Dial
  • Foot Brake
  • Center Sleeve (MT #5 x #3)
  • Dead Centers (MT #3)
  • Wired 220V (**440V – Optional additional transformer charge required)
  • Tool Kit (includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screwdriver, Flat Head Screwdriver, Oil can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, Can of Paint)

FEATURES:

  • 13”x 40” Capacity
  • 7-5/8” Over Cross Slide
  • 40-2000 RPM
  • “VS” Model can run single phase electrics
  • D1-4 Camlock Spindle 1-1/2” Bore
  • Gap Bed
  • 3 HP Motor (2-Speed Motor)
  • Hardened and Ground Bed Ways (Rockwell 50)
  • Larger Compound, Tailstock, and Apron Allow Heavier Cutting with Less Vibration than Competitive Models Vari-Speed, All Geared Headstock Housed inside a Sturdy Cast Iron Base.
  • Jog Button for Easy Gear Engagement and Inching Spindle
  • Quick Change Gearbox Offers a Wide Range of Threads

SPECIFICATIONS:

Capacity

Swing Over Bed: 13”

Swing Over Cross Slide: 8-5/16”

Swing Over Gap: 18-1/2”

Width Of Bed: 7-1/2”

Width of Gap: 9.25”

Distance Between Centers: 40”


Headstock

Spindle Nose Type: D1-4 camlock

Spindle Bore: 1-9/16”

Spindle Speeds: 40-2,000 RPM

Taper of Spindle Bore: MT#5


Threads and Feeds

Longitudinal Feeds – in/rev (40): 0.0016 - 0.046

Cross Feeds – in / rev (40): 0.0005 –0.015”

Inch Threads (40): 2-56 tpi

Metric Threads (22): 0. 5 –12mm

Leadscrew Pitch, Diameter: 8 tpi, 1”


Carriage

Apron Width: 11”

Cross Slide Width: 4.5”

Cross Slide Travel: 6-3/4”


Compound Rest Travel: 3-1/2”

Bed

Bed Length: 64”

Bed Width: 7-1/2”


Tailstock

Quill Travel (graduated): 4”

Quill Diameter: 1-9/16”

Quill Taper: MT#3


General

Spindle Motor: 3 HP

Net Weight (approx.): 1,550 LBS

Standard Color: Gray


Electrical:

Voltage 220 3PH (440 volts optional)

Total Power Consumption 220V 3KVA/10 amps, 440V 3KVA/5 amps

***All Price, Location and Specifications Subject to Change without Notice***

MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.

(Get the 1340VS-K Package which includes: 2 Axis Newall Digital Readout, Follower Rest, Chuck Guard with Limit Switch and Work Light all for just $14,400)