16” Swing (24” with Gap Removed) X 60” Manual Gap-Bed Engine Lathe with 3 1/16” D1-8 Camlock Spindle Bore, 7.5HP Drive Motor, 12 Speed Gear Drive (Digital Variable Speed Drive Available), Tailstock, Follower Rest, 8.75” Swing Over Cross-Slide, 3 Jaw 10” Chuck, Coolant System and Splash Guarding, 16” Face Plate, Steady Rest, 4-Way Tool Post, Halogen Work Light and Tool Kit Included.

STANDARD EQUIPMENT:

  • 10” 3-Jaw Chuck
  • 16” Face Plate
  • Steady Rest (1/2” to 6”) & Follower Rest
  • Coolant System & Full Length Splash Guard
  • American Tool Post
  • Halogen Worklight
  • Longitudinal Carriage Stop
  • Center sleeve ( MT 5 x 3)
  • Dead centers ( MT# 4x1, MT # 5 x1)  
  • Tailstock
  • Tool Kit includes:
  • Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip ScrewDriver, Flat Head Screwdriver, Oil can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, Can of Paint

FEATURES:

  • D1- 8 Camlock
  • 3 - 1/16”” Spindle Bore
  • Direct Selection For Inch/Metric Threads
  • One Piece Cast Meehanite Bed
  • Quick Change Gearbox
  • 7.5 HP Motor
  • 12-Speed Gear Head (40-2,000 RPM)

 

SPECIFICATIONS:

Swing Over Bed: 16”

Swing Over Cross Slide: 8.75”

Swing Over Gap: 24.38”

Distance Between Centers: 60”

Width of Gap: 9.75”

Center height from top of compound: 1.9”

 

Headstock

Spindle Nose Type D1-8 Camlock

Spindle Bore 3 - 1/16”

Spindle Speeds (12 Speed) 20 - 2,000 RPM

Taper of  Spindle Bore MT#6

Taper of Center MT#4

Threads and Feeds

  • Longitudinal Feeds – in/rev (18) 0.002 - 0.032”
  • Cross Feeds – in /rev: 0.0001 –0.0094”
  • Inch Threads (#): 4-56 tpi
  • Metric and Module Threads: 0.5-7mm
  • D.P. Threads (36): 4-56 mm
  • Leadscrew Pitch, Diameter: 4 tpi, 1-3/8”

Carriage

Cross Slide Width: 8.7”

Compound Rest Travel: 4.9”

Compound Width: 4.5”

Bed

Bed Length: 69”

Bed Width: 11-3/4”

Tailstock

Quill Travel (graduated): 5”

Quill Diameter: 2.25”

Quill Taper: MT#4

 

GENERAL

Spindle Motor (220V,60, 3) 7.5 HP

Net Weight (approx.) 3,600 LBS

Standard Color Gray

Electrical:

Voltage: 220V

Phase: 3 phase

Note: Machine is set only for 220 V. Needs an optional transformer for other applications.

Total Power Consumption  230V: 8KVA/25 amps

***All Price, Location and Specifications Subject to Change without Notice***

MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.

22660