16” Swing (24” with Gap Removed) X 60” Manual Gap-Bed Engine Lathe with 3 1/16” D1-8 Camlock Spindle Bore, 7.5HP Drive Motor, 12 Speed Gear Drive (Digital Variable Speed Drive Available), Tailstock, Follower Rest, 8.75” Swing Over Cross-Slide, 3 Jaw 10” Chuck, Coolant System and Splash Guarding, 16” Face Plate, Steady Rest, 4-Way Tool Post, Halogen Work Light and Tool Kit Included.
STANDARD EQUIPMENT:
- 10” 3-Jaw Chuck
- Coolant System
- American Tool Post
- 16” Face Plate
- Steady Rest (1/2”-6”) & Follower Rest
- Threading Dial
- Center Sleeve (MT #5 x 3)
- Dead Centers (MT #4x1 and MT # 5 x1)
- Halogen Work Light
- 220V or 440 V (575 V needs an optional transformer)
- Tool Kit - Including: Machine Manual, Half Nut Wrench, 17 & 19mm Wrench’s, Set of Allen Wrenches, Phillip Screwdriver, Flat Head Screwdriver, Oil can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator & Can of Paint.
FEATURES:
- D1- 8 Camlock
- 3 - 1/16”” Spindle Bore
- Direct Selection For Inch/Metric Threads
- One Piece Cast Meehanite Bed
- Quick Change Gearbox
- 7.5 HP Motor
- 12-Speed Gear Head (40-2,000 RPM)
SPECIFICATIONS:
Swing Over Bed: 16”
Swing Over Cross Slide: 8.75”
Swing Over Gap: 24.38”
Distance Between Centers: 80”
Width Of Bed: 11.75”
Width of Gap: 9.75”
Center height from top of compound: 1.9”
Distance Between Centers: 60”
Headstock
Spindle Nose Type D1-8 Camlock
Spindle Bore 3 - 1/16”
Spindle Speeds (12 Speed) 235 - 2,000 RPM
Low 20-170
Taper of Spindle Bore MT#6
Taper of Center MT#4
Threads and Feeds
- Longitudinal Feeds – in/rev (18) 0.002 - 0.032”
- Cross Feeds – in /rev: 0.0001 –0.0094”
- Inch Threads (#): 4-56 tpi
- Metric and Module Threads: 0.5-7mm
- D.P. Threads (36): 4-56 mm
- Leadscrew Pitch, Diameter: 4 tpi, 1-3/8”
Carriage
Cross Slide Width: 8.7”
Compound Rest Travel: 4.9”
Compound Width: 4.5”
Bed
Bed Length: 77”
Bed Width: 11-3/4”
Tailstock
Quill Travel (graduated): 5”
Quill Diameter: 2.25”
Quill Taper: MT#4
GENERAL
Spindle Motor (220V or 440V, 60, 3) 7.5 HP
Net Weight (approx.) 4,100 LBS
Standard Color Gray
Electrical:
Voltage: 230V/460V
Phase: 3 phase
Total Power Consumptions
230V: 8KVA/25 amps
460V: 8KVA/12.5 amps
***All Price, Location and Specifications Subject to Change without Notice***
MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.