9” X 49” Capacity Vertical Milling Machine with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Meehanite Casting, Chromed Ways, elf-Lubricating Motor Shaft, Abec-7 Super Precision Spindle Bearings, Digital Variable Speed, 3- Axis Digital Readout (quill, saddle and table), X –axis Power Feed, Hard-Chromed Ways, Front & Rear Rubber Way Cover, & One Shot Lube System.


  • 3- Axis Digital Readout (quill, saddle and table)
  • X –axis Power feed  
  • Hard-Chromed Ways
  • Font & Rear Rubber Way Cover
  • One Shot Lube System
  • Digital Variable Speed Head wired 220V (440V requires additional transformer)
  • Tool Kit (includes: Machine manual, Half nut wrench, Wrench 17, & 19m, Set of 6 Allen wrenches, Phillip screwdriver, Flat head screwdriver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator Can of paint.)


  • 3HP Motor
  • Variable Speed Drive (60-4500 RPM)
  • R-8 Spindle
  • Meehanite Casting
  • Chromed Ways
  • Self-Lubricating Motor Shaft Extends Pulley Life
  • Abec-7 Super Precision Spindle Bearings
  • Digital Variable Speed (440 V Application needs an optional Transformer)
  • Digital Readout  - Features: Calculation Functions, Finding Center of Part, Drilling Holes on Oblique Line, Bolt Circles, Power Interrupt, Linear Error Compensation Milling Functions,        
  • 2 years limited Manufacturing Warranty


  • Table Working Surface: 9” x 42”
  • T-Slots Number and Size: 3 Slots, 5/8”

  • Travels (X, Y, And Z): 30” x 12” x 5”
  • Ram Travel: 12”
  • Knee Travel: 16”
  • Spindle To Column (Min-Max): 6 3/4”-18 1/2”
  • Spindle Nose To Table (Min-Max): 2 1/8”-18”
  • Spindle Motor: 3 HP
  • Spindle Nose Taper: R8
  • Spindle Variable Speed Drive: 60-4500 Rpm
  • Quill Feed 3 Speed (IPR): 0.0015, .003, .006”
  • Head Swivels: 360°
  • Head Tilt (Lt. To Rt) : 45°
  • Head Tilt (Up And Down): 45°
  • Floor Area (W x D x H): 7’ x 6.5’ x 6.75’
  • Weight: 2,400 Lbs.
  • Total Power Consumptions
  • 220V: 3KVA/15 amps
  • 440V: 3KVA/7.5 amps


ISO 9002 certified: Quality up to world industry standards.
Meehanite casting: Highest grade of casting possible.

A pair of precision ABEC-7 angular contact bearings to support spindle.  

The quill is ground and chromed to fit the housing: This insures a spindle run out of 0.0002” T.I.R.

Motor shaft and VariDrive pulleys are dynamically balanced, then chromed for a flawless fit, ground ribs on inside diameter: For smooth speed changes.

Motor shaft has an oil channel in the center that is fed by grease fitting on the lower end: To keep VariDrive pulley moving smoothly on the shaft.

This LMV mill uses a roller bearing for the lower support of the shaft: It ensures proper loading, support and alignment. It also prevents the shaft from being distorted by the tension of the belt: For quiet, accurate operation at any speed for years and years.

One shot lubrication system: For lubrication of ways and lead screws. (X, Y and Z-axis)

Hand scraped saddle and knee:  For better oil retention.  It avoids having chips and dirt embed in the knee and damage the sliding surface.

Oil groove are milled:  For maximum lubrication on all wear areas.

Table and saddle backlash is controlled by double nut design:  Keeps lead screw in contact with bronze nuts all times to keep backlash at .0008” within 20”.

Table and saddle are mounted with thrust bearings that are preloaded:  Eliminating endplay for precisely controlled lateral movement.

Ways are hard chromed dovetail on saddle and column.

***All Price, Location and Specifications Subject to Change without Notice***