20” x 26-3/8” Engine Lathe with 10”  3-Jaw Scroll Chuck, 16” 4-Jaw Independent Chuck, 3” - 8” Capacity Steady Rest, Full Length Back Splash Guard, Chuck Guard w/ Safety Inerlock, Foot Brake, 4-Way Tool Post w/ Wrench, Machine Leveling Pads and Halogen Work Light.

GENERAL SPECIFICATIONS

  • Swing Over Bed: 20” 510mm
  • Center Height: 10” 255mm
  • Swing Over Cross Slide: 13” 330mm
  • Swing Thru Gap: 26-3/8” 680mm
  • Length of Gap in Front of D1-8 Faceplate: 7-1/16” 180mm
  • Bed Casting Width & Depth: 16-1/8” / 12-7/32” 400mm / 310mm
  • Spindle Motor Horsepower: 10-HP 3-Phase
  • Spindle Speeds: 12 Speeds, 20 - 1550 rpm (High & Low)
  • Spindle Bore: 3-1/8” 80mm
  • Spindle Nose: D1-8
  • Cam Lock Spindle Taper in Spindle Nose: MT-7 Morse Taper # 7
  • Spindle Taper Reduction Sleeve Provided: MT-7 to MT-5
  • Carriage Cross Slide Travel: 12-1/2” 320mm
  • Cross Slide Width: 7-3/32” 180mm
  • Cross Slide Lead Screw Pitch: .200”/rev.
  • Cross Slide Resolution Per Division: 0.001” (on Diameters)
  • Carriage Lead Screw Diameter: 1-1/2” 38mm
  • Carriage Lead Screw Pitch: 4 TPI 6mm pitch
  • Feed Rod Dimensions: 7/8” Hexagon 23mm Hexagon
  • Compound Top Slide Travel: 10” 255mm
  • Compound Top Slide Width: 4-11/32” 110mm
  • Cutting Tool Height Maximum: 1.0” x 1.0” 25mm x 25mm
  • Quill Diameter: 2-15/16” 75mm
  • Quill Stroke: 6-5/16” 160mm
  • Tailstock Body Set-Over Adjustment: ± ½” ± 13mm
  • Thread Cutting Range: 60 Inch Pitches 2, 112 TPI
  • Thread Cutting Range: 60 Metric Pitches 0.2, 14mm
  • Thread Cutting Range: 50 Diametral Pitches 4, 112 D.P.
  • Thread Cutting Range: 50 Module Pitches 0.2, 7 M.P.
  • Thread Cutting Lead Screw Diameter: Pitch 1-1/2”, 4 TPI 38mm, 6mm Pitch
  • Quill Taper MT-5 Morse Taper # 5: Quill Tang Drive and Drift-Slot for Tailstock Included
  • Feeds - Longitudinal: 50 Feeds 0.0014”, 0.0387”/rev. 0.037, 1.04mm/rev.
  • Feeds - Cross: 50 Feeds 0.0007”, 0.01935”/rev. 0.0185, 0.52mm/rev.
  • Coolant Pump 1/8-HP Machine Power Requirements (440vac Optional): 220vac, 3-Phase,

INCLUDES: 10”  3-Jaw Scroll Chuck, 16” 4-Jaw Independent Chuck, 3” - 8” Capacity Steady Rest, Full Length Back Splash Guard, Chuck Guard w/ Safety Inerlock, Foot Brake, 4-Way Tool Post w/ Wrench, Machine Leveling Pads and Halogen Work Light.


***All Price, Location and Specifications Subject to Change without Notice***
Sold