31.5” X 196.85” Heavy Duty Engine Lathe with D-15 Spindle Nose, MT6 Tailstock Taper, 400 mm 3-Jaw Chuck, 630 mm 4-Jaw Chuck, Center Sleeve, Iron Gaskets, Foundation Bolts, Chuck Guard, Tool - Rest Guard, Work Light and Coolant Pump

GENERAL SPECIFICATIONS 
Swing Over Bed:                        31.5”
Swing Over Cross Slide:                    18.9”
Swing in Gap:                        39.37”
Effective Gap Length:                    9.06”
Machining Length:                        196.85”
Bed Width:                            21.65”
Spindle Bore:                            5.12”
Spindle Taper:                        1:20
Spindle Speeds:                        14 - 750 RPM, 18 Steps
Metric Threads:                        1 - 240 mm, 54 Selections
Inch Threads:                        1 - 28 TPI, 36 Selections
Module Threads:                        0.5 - 60, 27 Selections
Diametral Threads:                        1 - 30, 27 Selections
Longitudinal Feed:                        0.048 - 24.3 mm/rev, 27 Selections
Cross Feed:                            0.024 - 12.15 mm/rev, 72 Selections
Rapid Traverse Longitudinal / Cross:            4/2 m/min
Leadscrew Diameter / Pitch:                55/12 mm
Cross Slide Travel:                        16.54”
Compound Travel:                        7.87”
Tool Shank:                            32 X 32 mm
Tailstock Quill Diameter:                    3.94”
Tailstock Quill Travel:                    9.45”
Main Motor:                            14.75 HP
Electrical:                            230/460 V, 60 HZ, 3 Phase
Shipping Dimensions:                    295.3” X 66.9” X 78.7”
Approx. Weight:                        16,535 Lbs

INCLUDES: D-15 Spindle Nose, MT6 Tailstock Taper, 400 mm 3-Jaw Chuck, 630 mm 4-Jaw Chuck, Center Sleeve, Iron Gaskets, Foundation Bolts, Chuck Guard, Tool - Rest Guard, Work Light and Coolant Pump

***All Price, Location and Specifications Subject to Change without Notice***