5’ X 10’ DEMO (NEVER USED IN PRODUCTION) Waterjet Cutting System with American Waterjet’s Exclusive PC Based Controller, Factory Rebuilt 30HP 60KPSI Intensifier Pump, Programmable Z-Axis, Zero Line Work Surface and Corobrick Non-Scratching Bed Design & 800LB Bulk Abrasive Hopper. This system is sold with a 2 year Manufacturers Parts Warranty with Onsite Installation and Training Available
GENERAL DESIGN CONCEPT:
- Bridge Gantry design
- 4 Servo Controlled AxesFully Sealed, Round Bellows Protect Motion Components And Shed Water And Abrasive
- Maintenance-free Guideway System
- Cables Protected By Enclosed “e-tubes”
- 6” Gutter And “tooling Lip” Design
GENERAL SPECIFICATIONS:
- Travel X axis (width): 61.5 inches
- Travel Y axis (depth): 121.5 inches
- Travel Z Axis (Tool): 8 inches total
- Clearance: 6 inches clearance from carriage to top of table.
- Park Area: Bridge parks completely off of work area
providing complete clearance for loading - Table Length: 12 ft
- Table Type: Zero-Line Table design allows material or parts
longer than the 10’ travel to be indexed through
the table and not dropped into a tank - Table Work Surface: Corobrick or Steel Slats
- Speeds:
- Rapid Traverse: 500 ipm
- Profiling speeds: 0.01 to 500 ipm
- Motion Accuracy*
- Linear Positioning: +/-0.003 on each axis
- Repeatability: +/-0.001
- Motion System: Helical Rack and Pinion (X and Y axes)
- Guideways utilize zero-maintenance sealed
Bearings. - Kollmorgen Digital servo drives and motors with
“smart feedback”
CONTROL CONSOLE DESCRIPTION
- Standalone control cabinet houses all control components
- Nema 4 Enclosure – water and dust tight
- Mk4 Waterjet Control system
- PC based (Windows 10)
- Requires 20 amp single phase at 230 vac (+/-10%)
- Waterproof Keyboard
- Marble Trackball - superior to other devices around abrasive
- External USB 4-port hub
- Wifi Ready
- Bluetooth installation for Remote Operator Android App
INTENSIFIER PUMP
- Make: American Waterjet
- Model: 30J Intensifier Pump
- Horsepower 30 HP
- Operating Pressure: 60,000 PSI
- Type: “ESL” type intensifier
- Output: 0.6 gal/min output in normal operation
- Control: Fully integrated to the Machine Control
- Features: Start/Stop/Estop, Pressure Hi/Low/Auto
Pump Protection Sensor Suite:
Water Pressure, Low Oil, High Oil Temp,
Pump diagnostics returned to console - Voltage: 100 AMP service at 208-240 vac
ABRASIVE DELIVERY SYSTEM
- Capacity: 800LB
- Abrasive Metering: Digital Rotary Feeder near cutting head
- Metering Control: Digitally commanded from the Control Output Range: 0.25 Lb. per min to 1.5 Lb. per min
- Output Control: Software selectable
- Maintenance: Calibration Wizard: Verifies the garnet
density equals commanded output - Sensors: Abrasive Blockage Detection
CUTTING HEAD AND HIGH PRESSURE DELIVERY
- Type: Dialine abrasive cutting head
- Orifice: Diamond Orifice
- Maximum Orifice: 0.011 Diameter
- HP Control: American Waterjet On/Off Actuator, valve body and tube
- Delivery: High pressure whip between pump and cutting head
*Accuracies Provided for Reference Only - Manufacturer Warrants all Positioning Accuracies when machine is installed within their specifications and guidelines.
INCLUDES:
- American Waterjet’s Exclusive PC Based Controller
- Factory Rebuilt 30HP 60KPSI Intensifier Pump
- Programmable Z-Axis
- Zero Line Work Surface and Corobrick Non-Scratching Bed Design
- 800LB Bulk Abrasive Hopper.
- This system is sold with a 2 year Manufacturers Parts Warranty with Onsite Installation and Training Available
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***