6’ X 24’ Waterjet Cutting System with Flow PC Controls (Upgraded in 2018) and Rebuilt Intensifier Pump.
6’ X 12’ Waterjet Cutting System with Flow Computer Based Controls, Dynamic Cutting and 600 Lbs Hopper.
120” X 240” CNC Waterjet with Omax Based Control, A - Jet Multi Axis Cutting Head, Chiller, Abrasive Hopper, Solid Removal System and Terrain Follower.
80” X 160” CNC Waterjet with Omax PC Based Control, 3 - Axis Motorized Z - Cutting Head, 40 HP Pump Motor and 60 KPSI Pump Pressure.
4’ X 8’ CNC Waterjet with Omax Windows Based Controls, Variable Speed SRS (Solids Removal System), Water Softener, 75 KVA Transformer, Omax MAXJET5 5-Axis Nozzle, 600 Lb Bulk Abrasive Hopper and Enduramax P4060V Direct Drive Pump.
4' X 4' Waterjet with CNC WARDJet Move and WARDCAM Software Touchscreen Controller, Hypertherm Echion 50 Intensifier Pump 50 HP - 60,000 PSI, Programmable Z-Axis, Helical Rack and Pinion Drive Mechanism, Integrated 85 LBS SmartFeed Bulk Feed Hopper, Abrasivejet Cutting Head with Diamond Orifice and Thimble Filter. Only 156 Hours
26” X 52” Abrasive Waterjet Cutting System with OMAX PC Based Controller, OMAX 30 Horsepower, 60,000 PSI, Motorized Z-Axis, Solids Removal System (SRS) and Under 100 Hours On Pump
6.5’ X 13’’ CNC Waterjet Cutting System with Flow PC Based Controller Running FlowMaster V6.0 and FlowXPert Software Suite, Dynamic Countor Control, Active Tolerance Control, Paser 4 Swiveless Cutting Head and 50 HP / 60,000 PSI Pump
5’ X 10' Waterjet Cutting System with Omax PC Based Controller and 40 HP Pump
6’ X 13’ Waterjet Cutting System with CMC Burny Phantom ST CNC Control, Jet Edge 55-50C Intensifier and 3-Axis Abrasive Cutting Head
13' X 22' 5 Axis Twin Table Waterjet System with Portable Control Unit with Remote Commands up to 6 Axes, Power 60 (45) HP (kW) and Pressurized Abrasive Conveying System
6’ X 12’ Capacity 5-Axis Waterjet Cutting System with PC-Based Omax CNC Controller, Enduromax 30 HP 50,000 PSI Pump, Tilt-a-Jet Programmable Taper Compensating Cutting Head, Programmable Z-Axis and 300 LB Abrasive Hopper
10' 6" X 5' 5" with PC / Windows 7 Based Control, 55,000 PSI, Meyers Pump P3055V 30 HP Pump and Has Small Garnet Hopper Water Cooler - Koolant Kooler Model HAF1000
6’ X 12’ CNC Abrasive Waterjet Cutting System with Mitsubishi M720 CNC Controller, On Board Metamation CAD/CAM System, Ultra-High Pressure 60KPSI KMT Intensifier Pump, Complete Ebbco Closed Loop Water Filtration System, Chiller and Ebbco Abrasive Removal System
5’ X 10’ CNC Waterjet Cutting System with Calypso Windows 10 Based PC CNC Controller, 30 HP 60KPSI KMT Intensifier Pump, 600 LB Bulk Abrasive Hopper, HP Tubing and Manuals
6’ 7” X 13’ 10” X 12” 5 Axis CNC Abrasive Waterjet Cutting System with Omax PC Based Controller, A-JET 5-Axis Cutting Head, Maxiem Pump 30 HP 50KPSI Direct Drive Pump, Terrain Follower, Water Level Control, 600 LB Bulk Abrasive Hopper, Abrasive Removal System and Under 2800 Hours Total Operational Time
Rebuilt 6’ x 12’ CNC Abrasive Waterjet Cutting System with Flowmaster PC Based Controller, Dynamic Cutting Head, 50HP, 60K PSI Hyperjet Intensifier Pump and Abrasive Hopper. Rebuild includes: New X-Axis Ball Screw, PMAC Boards, Contacts, Solenoids, Fresh Pump Rebuild, Repaired and Refinished Cutting Tank/Table, New Paint & Graphics Package
5’ X 10’ Abrasive Waterjet Cutting System with Mitsubishi CNC Graphical Controller, 50 HP KMT 60K PSI (60,000 PSI) KMT Intensifier Pump, Chiller, Water Filler, Weir Tank (Ebbco), Bladder Tank (Ebbco), Control Pedestal & Software, Tool Box with Spare Parts, Grease Gun & Mobile Cart and Operator / Owners Manuals
5’ X 10” Waterjet with Bystronic CNC Control, 50 HP pump (Replaced In 2020) and Maximum Cutting Pressure 60,000 PSI, Dual Cutting Heads, Auto Precision Cutting and Abrasive Hopper
FULLY REFURBISHED - 10’ X 20’ CNC Abrasive Waterjet Cutting System with Current Calypso PC Based Controller System, NC Geomate/Console Operating System, 100HP 60KPSI Calypso Intensifier Pump, 600 LB Bulk Abrasive Hopper - Installation, Training, Updated Software & Warranty Included
4' X 4' CNC Abrasive Waterjet Cutting System with P.C. Controller, 40,000 PSI, 40H.P Abrasive Hopper 4' X 4' CNC Abrasive Waterjet Cutting System with P.C. Controller, 40,000 PSI, 40H.P Abrasive Hopper.
8’ X 15’ CNC Waterjet with Flowmaster Windows Based Control, Integrated Flying Bridge, Dynamic XD Waterjet - Dynamic 3D Waterjet, Hypertension Technology, 50 HP Hyperjet 87,000 PSI Intensifier Pump Flow International 9’ X 16’ Table and 5 - Axis Motion Head.
6’ X 12’ CNC Abrasive Waterjet Cutting System with FlowMaster PC Controller & FlowMaster Software, 50HP Direct Drive Pump & Abrasive Hopper.
20” X 240” Watejet Pipe Cutting System with 4-Axis CNC Control (Rotation of Pipe, Feeding Pipe, Cutting Head Goes Up/Down, and Cutting Head Goes Left/Right.), Pipe Diameters up to 17", Wall Thickness up to 3", Pump Max Pressure 60,000 PSI, Can Cut Holes in the Pipe Wall as Well as Cut Off the Pipe, It is Possible to Manually Set a Tilting Angle of the Cut Head so that the Pipe Would Have a Bevel Cutting Edge.
4,000 LBS Waterjet Garnet Removal System with Sandpiper HDF2 Diaphragm Pump, 10 Channel Radial Diffuser, Garnet Suction/Discharge Nozzle Assembly, Double Acting Hydraulic Hand Pump, Dual Garnet & Fine Silt Removal Modes, 2 Fixed and 2 Swivel (1,500 LBS.) Castors for Easy Mobility.
3000 LBS Waterjet Garnet Removal System with Sandpiper HDF2 Diaphragm Pump, HP65 Hydraulic Hand Pump, Cross-Flow Separator w/ Sealed Holding Chamber and Bottom Dump Door, Powder Coated with Cardinal Powder.
3000 LBS Waterjet Garnet Removal System with Sandpiper HDFI Diaphragm Pump, HP65 Hydraulic Hand Pump, Cross-Flow Separator w/ Sealed Holding Chamber and Bottom Dump Door, Powder Coated with Cardinal Powder.
Waterjet Garnet Box with Sandpiper HDF1 Diaphragm Pump, Patented 4” Cross-Flow Separator, 38 PPM Garnet Removal Rate, HP65 Hydraulic Hand Pump.
4' X 4' CNC Abrasive Waterjet Cutting System with P.C Controller, 60,000 PSI, Abrasive Hopper.
5’ X 10’ Abrasive Waterjet Cutting System with Mitsubishi CNC Graphic Controller, Intelligent ITC and Height Sensor, Collision Center, Closed Loop Water Recycle System and Abrasive Removal System.
6' X 20' CNC Cantilever Type Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.
10' X 20' CNC Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.
6' X 10' CNC Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.
3' X 3' CNC Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.
12’ X 6’ CNC Abrasive Waterjet Cutting System with Flow PC Based Flowmaster Controller, 100HP 60KPSI Dual-Intensifier Pump, Powered Z-Axis.
5' X 10' CNC Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.
Ebbco GR5-0502 Abrasive Removal System is Designed to Continuously Remove the Spent Abrasive that Collects in the Catch Tank, Thus Eliminating Downtime for Clean Out and Maximizes Production. The GR5-0502 Can be Retrofitted to Any Abrasive Waterjet Cutting Machine Tool.
4' X 8' CNC Abrasive Waterjet Cutting System with P.C Controller, 60,000 PSI, Abrasive Hopper.
6' X 13' CNC Abrasive Waterjet Cutting System with CNC Control, 60,000 PSI, Abrasive Hopper, Software Compatible to DXF and G-Code.
8' X 24' Waterjet Cutting System with 100 HP 87,000 PSI Hyper Jet Dual Intensifier, Dynamic XD 5-Axis Head, 300 LB Hopper.
6' X 12' High Rail Gantry Waterjet Cutting System with 12" Z Axis Abrasive Cutting Head, Aquavision Di PC Based Controller and Remote Pendant, Jet Edge Model iP6050 Intensifier Pump w/ 55,000 PSI Continuous Pressure, 50 HP, Sigmanest CAD/CAM Software.
