120” X 40” X 30” 5-Axis Vertical Machining Center with 30 HP, 10K RPM Spindle, TSC, 32 Position CT 40 Tool Changer, High Speed Machining, 16MB Memory, Rigid Tapping, 32 Position P-COOL Coolant Spigot, Coordinate Rotation & Scaling, Macros, Chip Auger, Floppy Disk Drive, USB Port, Linear Scales, Second Home Button, M19 Spindle Orientation P & R Codes, VQCPS Full Probing System, Tool Presetter Probe, and Power Failure Module. Very Low Hours (Under 3K Spindle Hours). Factory Service Inspected and Prepped.
GENERAL SPECIFICATIONS
X - Axis Travel: 120”
Y - Axis Travel: 40”
Z - Axis Travel: 30”
Max Rating X: 7.5 HP
Max Rating Y: 5 HP
Max Rating Z: 5 HP
A - Axis Tilt: ±32°
Max Thrust X/Y/Z: 3,400 Lbs
T - Slot Width: ⅝”
Max Cutting A/B: 600° / Min
Max Tooling Weight: 12 Lbs
Coolant Capacity: 95 Gal
Max Tool Diameter: 3.5”
Bearing Lubrication: Air / Oil Injection
T - Slots Center Distance: 4.92”
Positioning A/B Axes: ±45 Arc - Sec
Drive System: Vector Drive
Taper: CT40
Table Size: 120” X 28”
Tool Changer: 32 ATC
Max Speed: 10,000 Rpm
Max Rating: 30 HP
Max Cutting: 360 In / Min
Rapids on A/B: 1,900° / Min
Rapids on X: 360 In / Min
Rapids on Y & Z: 600 In / Min
Air Required: 9 SCFM, 100 PSI
B - Axis Rotation: ±32°
Spindle Nose to Table: 4” - 34”
INCLUDES: 30 HP, 10K RPM Spindle, TSC, 32 Position CT 40 Tool Changer, High Speed Machining, 16MB Memory, Rigid Tapping, 32 Position P-COOL Coolant Spigot, Coordinate Rotation & Scaling, Macros, Chip Auger, Floppy Disk Drive, USB Port, Linear Scales, Second Home Button, M19 Spindle Orientation P & R Codes, VQCPS Full Probing System, Tool Presetter Probe, and Power Failure Module.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***