240” X 72” X 21” Long Bed Vertical Machining Center with Omron FlexCNC Control, AMI5000 Remote Pendant, 20 Station ATC, Through Spindle Coolant, Tool Break DetectionChip Auger and T - Slot Rails.
64” X 40” X 40” Vertical Machining Center with 15,000 RPM, 20 HP Dual Driver Motor, CAT 40, 24 Position Tool Changer and Programmable Coolant.
19.7” X 17.7” X 15.7” Vertical Machining Center with Heidenhain ERGOline CNC Control, Full 5 - Axis Simultaneous Machining, Probe, Tool Measure and Coolant Thru Spindle.
23.62” X 17.71” X 17.71” 5 - Axis Vertical Machining Center with Heidenhain CNC Controls, Probe, Chip Conveyor and Programmable Coolant.
43.3” X 22” X 20.5” Verical Machining Center with Fanuc i Series CNC Controller, Linear Roller Guideways, 30 Count ATC and Minimum Quantity Lubrication.
40” X 20” X 25” Vertical Machining Center with Haas 32 - Bit CNC Control w/ 12” CRT Screen, Hard Disk Drive, Floppy & Ethernet Interface, Rigid Tapping, High Intensity Lights, 40 Taper, 55 - Gallon Flood Coolant System, Programmable Coolant, Auger / Scrap Chute, (2) RS-232C USB Ports and 4th - Axis Prewired and Ready.
24” X 14” X 18” Vertical Machining Center with Fanuc Oi-MF CNC Control, CAT-40 Taper Spindle w/ 8,000 RPM, Rigid Tapping, Carousel Style 16 Style Tool Capacity Changer, Box Way and Pull-Out Style Chip Pan.
30” X 16” X 20” Vertical Machining Center with Haas CNC Control with USB Port, Brushless Servos on All Axis, (2) Speed Gear Box, Programmable Coolant, Quick Code, Rigid Tap, Twenty Position Automatic Toolchanger, Chip Auger, Telescopic Way Covers, Air Gun, (6) Leveling Pads, BIJUR Automatic Lubrication System, 20 HP Vector Dual Drive, Through Spindle Coolant, Rigid Tapping, Coordinate Rotation and Scaling, High Speed Machining, M19 Spindle Orientation, Haas HRT210 4th - Axis Rotary Table, Machine Manuals, External Coolant Tank & Coolant Pump.
25.2” X 17” X 18.1” Mini Mill with Fanuc 0i-MF Control, CAT 40 Taper, Linear Roller Way, Spindle Chiller, 24 Capacity ATC, Air Blast at Tool Change, 42 Gallon Coolant System, Pull Out Style Chip Cabinet and Heat Exchange System for Electric Cabinet.
120” X 40” X 30” 5-Axis Vertical Machining Center with 30 HP, 10K RPM Spindle, TSC, 32 Position CT 40 Tool Changer, High Speed Machining, 16MB Memory, Rigid Tapping, 32 Position P-COOL Coolant Spigot, Coordinate Rotation & Scaling, Macros, Chip Auger, Floppy Disk Drive, USB Port, Linear Scales, Second Home Button, M19 Spindle Orientation P & R Codes, VQCPS Full Probing System, Tool Presetter Probe, and Power Failure Module. Very Low Hours (Under 3K Spindle Hours). Factory Service Inspected and Prepped.
42” X 24” X 24” Vertical Machining Center with 24 Position ATC and CAT 40 Taper.
42” X 24” X 24” Vertical Machining Center with 24 Position ATC, CAT 40 Taper and 4th Axis.
50” X 26” X 24” Vertical Machining Center with 24 Position ATC, CAT 40 Taper and 24 HP Motor.
50” X 26” X 24” Vertical Machining Center with 24 Position ATC, CAT 40 Taper and 24 HP Motor.
30” X 20” X 24” Vertical Machining Center with the Hurco Ultimax Dual Screen CNC controller, 15K 17HP Spindle Drive, 24 Position Side Arm Tool Changer, Coolant Washdown Nozzle, Air Blow Nozzle, Tool Probing, Part Probing, Rigid Tapping, Adaptive Surface Finishing, Ultinet, DXF Input with 16K Spindle Hours.
50” X 26” X 24” Vertical Machining Center with the Hurco Dual Screen Controller, 24 Position Side Arm Tool Changer and 10K RPM 24 HP Spindle
22” X 16” X 20” Vertical Machining Center with Fadal CNC88HS Control, Tool Holders to Fill the ATC, 21 Station Tool Changer and Manuals
23.6" X 15.7" X 18.1" Vertical Machining Center with Fanuc Oi - Mate - MD CNC Control, Chip Pan, Flood Coolant and Linear Construction
60" X 26" Vertical Machining Center with CAT 50 Spindle Taper, 30 Position Tool Changer, Programmable Coolant, Probing Renshaw OMP 40-3 PROBE, New Belts & Motor Mounts, Rebuilt Spindle, New Battery Pack, Chip Auger and 30 HP 2 Speed Geared Drive
118” X 82.3” X 30” CNC Gantry / Bridge Mill with Fanuc 18-MB CNC Control, ATC 32, Taper CAT 50, Coolant Tank and Pump and Chip Conveyor
35.4" X 19.7" X 19.7" CNC Vertical Machining Center with Makino Pro 3 CNC Control (Fanuc 18i), 20 ATC Tool Changer and CAT 40 Spindle Taper
50" X 25" X 24" Vertical Machining Center with Centurion 7 CNC Control, 15 HP Spindle, 24 Tool ATC with Twin Arm Changer, 40 Taper Spindle with 8000 RPM and Chip Auger