9’ X 20’ Dual Head CNC Abrasive Waterjet Cutting System with Calypso PC Based Controller System Operating on NC Geomate Programming and Estimating Software, NC Console Operating System, Dual 60HP 60KPSI KMT Intensifier Pumps, Dual Head with Programmable Offsetting and Mirror Cutting Capabilities, Ebbco Abrasive Removal System, Machine Controller completely upgraded in 2014 and currently supported


SYSTEMS FEATURES:

  • 9’x20’ Bridge Gantry X-Y table
  • Fully sealed bellow system on bridge
  • Lip sealed Way Covers of Y axis
  • Servo Controlled Z axis
  • Auto Tool Lift and Nudge Jog
  • Dual 60 HP Intensifier Pump
  • 60,KPSI Max Pressure
  • Standard HP Plumbing
  • Control Console – industrially hardened and climate controlled
  • PC Computer with Windows 10 OS
  • Calypso’s exclusive software suite – from Drawing to Part
  • Remote Operator Pendant
  • Drive System and Guideway System
  • Bridge Gantry driven from both sides
  • Motion system mounted to robust frame
  • Separate water filled catch tank
  • Machine squareness maintained electronically
  • 6 Axis Programmable Positioning
  • True closed loop servo drive system – loop is closed back to the controller
  • Brushless servo motors
  • Precision rack and pinion drive system/planetary low backlash gearheads
  • Speed range (standard): .1 to 1000 ipm standard
  • Recirculating ball bearing runner blocks on hardened precision ground ways.
  • 360° Bellows seal all motion components from abrasive invasion on bridge
  • Lip sealed way covers on Y axis rails
  • Abrasive Removal System

Digital Abrasive Control (DAC): The exclusive Digital Abrasive Control System is the most precise metering system available. Digitally commanded from the PC Control system, DAC provides precise metering and control at the cutting head. Since the system is computer controlled, the desired abrasive flow Calypso Digital Abrasive Feeder rate can be quickly changed at the PC control.

GENERAL SPECIFICATIONS 

  • Machine Work Area: 9’x20’
  • Actual X axis travel (Bridge travel or width): 108”
  • Actual Y axis travel (depth): 240”
  • Z axis travel: 6” to top of Corobed
  • Z axis maximum clearance: 10” to top of grating
  • Motion Accuracy (For Reference Only)
  • Linear accuracy over full travel of X and Y axis: +/-0.005
  • Over each ten feet of travel: +/- 0.003
  • Repeatability: +/- 0.002
  • Squareness: 0.001 per foot
  • Straightness: 0.003 per foot
  • Backlash: 0.0005 max

Machine Dimensions

Cutting Table Footprint: 11 feet x 24 feet


INCLUDES:  Calypso PC Based Controller System Operating on NC Geomate Programming and Estimating Software, NC Console Operating System, Dual 60HP 60KPSI KMT Intensifier Pumps, Dual Head with Programmable Offsetting and Mirror Cutting Capabilities, Ebbco Abrasive Removal System, Machine Controller completely upgraded in 2014 and currently supported.

***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***

Sold