Wire Electrical Discharge Machining (EDM or WEDM) is one of the most accurate manufacturing processes available, but that precision comes with a price tag. While buying a used Wire EDM can save you 40-60% compared to a new model, it is not a decision to take lightly. Unlike a standard 3-axis mill or lathe, an EDM involves complex sub-systems; systems like water filtration, cooling & deionization, auto-wire threading, and high-voltage power supplies and grounding cables—that all must work in harmony.

To ensure you get a machine that cuts microns rather than corners, here are the top five things you must know before signing the check.

Get a Quote of All the Items Included (Including tooling)

When looking at a price tag, make sure you know exactly what that number covers. A Wire EDM is rarely just a standalone box; it requires several peripherals to run. If these are missing, you could be looking at thousands of dollars in hidden costs.

  • The Chiller Unit: Is the dielectric chiller included? Is it the original unit or an aftermarket replacement?

  • Transformers: Many imported EDMs run on specific voltages (380V is typical). Does the machine come with the necessary step-up or step-down transformer?

  • Filtration System: Does it include the external filtration tanks and pumps? Deionization bottles? Any extra Resin included?

  • Tooling and Clamping: Rails, bridges, and stainless steel vices are expensive. If the previous owner includes their tooling package, that is a massive value-add and often can be thousands for just a few pieces. If work holding is not mentioned, ask and never assume its included just because you see it in a few photos. 

  • Software and Manuals: Ensure you get the original installation disks and parameter manuals. Without these, a control failure can become a total machine bricking event.

Use an Inspection to Make Sure its In Good Shape

Photographs, and even video can be deceiving, especially with EDMs where the most damage occurs inside the tank. Water and electricity create a harsh environment, and neglect leads to rust and pitting quickly, especially on grounding cables or when harsh chemicals are used from cleaning.

  • Visual Tank Inspection: Look for heavy rust or pitting on the table and seal plate. While some staining is normal, deep corrosion can affect accuracy and sealing.

  • Axis Movement: Ask to see the machine move in all axes (X, Y, U, V, and Z). Listen for grinding noises or "groaning," which could indicate worn ball screws or linear guides.

  • Test Cut: If possible, ask for a test cut. A simple square or circle cut can reveal backlash issues or power supply inconsistencies immediately.

Make Sure the Manufacturer Still Supports It

This is arguably the most critical long-term factor. Electronic components degrade over time, and if a proprietary circuit board fails, you need to know you can replace it.

  • Parts Availability: Call the manufacturer with the machine’s serial number before you buy. Ask if they still stock boards, drives, and motors for that specific year and model.

  • Service Technicians: Are there independent service techs in your area who know this specific brand? (e.g., Mitsubishi, Sodick, Fanuc, Charmilles/AGIE).

  • Software Support: Its also very important to ensure that the manufacture supports the software on the machine and has an applications or service technician knowledgeable on the use of the controller and software you are looking at.

Check the Automatic Wire Threader (AWT)

The Automatic Wire Threader is often the first thing to fail on an older machine, and it is the most critical feature for productivity. It could be simply a dirty threading system or potentially something much greater. If the AWT doesn't work, you lose the ability to run "lights out" (unattended overnight machining).

  • Test the Threader: During inspection, have the operator cut the wire and auto-thread it multiple times.

  • Check High/Low Water Threading: Some machines thread well in the air but fail when the tank is full.

  • Ask About Reliability: If the AWT is spotty, you are essentially buying a manual machine, and the price should reflect that significantly.

Review the Maintenance Log and Operational History

EDM machines live in a dirty environment. The "sludge" created during the cutting process is conductive and abrasive. If the previous owner was lazy with maintenance, that sludge has likely worked its way into the ball screws, ways and electronics.

  • Cutting Hours vs. Power-On Hours: A machine might be 10 years old but only have low cutting hours. However, low hours aren't always good—if it sat stagnant with water in the lines, seals may have rotted. Check the "erosion" hours vs the "power on" hours

  • Maintenance Records: Ask to see the log. You want to see regular changes of dielectric filters, deionization resin, and power feed contacts. A well-documented history is the best insurance policy you can get.

  • Inspect the Shop: Look around the shop at the other machines and processes. Cleanliness in general can indicate a well maintained system. If the shops filthy and unkempt and the machine appears clean it can indicate someone took time to polish up a worn and tired machine. 

Ready to find a reliable machine?

At Southern Fabricating Machinery Sales, we specialize in vetting used machinery so you don't have to guess. Check out our current inventory of Used Wire EDMs or contact us today to find the perfect fit for your shop.

Wire EDM Machinery Inventory