Waterjets

ProNest
SFMS is proud to partner with Hypertherm on a programming solution for all our flat sheet cutting systems including Lasers, Waterjets, Plasma and Oxy-Fuel.
Filter:
Sort:
Year
Price
Capacity
2010 Omax Maxiem 2040 Waterjet Cutting System (#3384)

2010 Omax Maxiem 2040 Waterjet Cutting System (#3384)

6’ x 12’ Capacity Waterjet Cutting System with Omax PC Based Controller, Omax Enduromax P3050V, 30HP 50K PSI Direct Drive Pump, Variable Speed Solids Removal System, Programmable Motorized Z-Axis, Touch Probe and 500 LBS Abrasive Bulk Hopper.

2017 Techni TJ-4000 X3 Waterjet Cutting System (#3324)

2017 Techni TJ-4000 X3 Waterjet Cutting System (#3324)

6' X 12' CNC Abrasive Waterjet Cutting System with Techni PC Based CNC Controller, Remote Pendant, Servo Z-Axis, Tech-Sense Abrasive Blockage Detection, BreakAway Head, Techni VP12/52 Servo Driven Intensifier Pump, 600LB Bulk Abrasive Hopper and Removable Tilting/Loading Device for Flat Sheets of Material.

2007 Calypso Shark LWA Waterjet Cutting System (#3320)

2007 Calypso Shark LWA Waterjet Cutting System (#3320)

10’ X 20’ Dual Head CNC Abrasive Waterjet Cutting System with Calypso Controller System, NC Console Operating System, 2 75HP 60KPSI Calypso Intensifier's Pumps, Dual Head with Programmable Offsetting and Mirror Cutting Capabilities, Abrasive Removal System, 2 Chiller's, Closed Loop System.

2000 Omax 2652 Waterjet Cutting System (#3315)

2000 Omax 2652 Waterjet Cutting System (#3315)

26" X 52" CNC Waterjet Cutting System with the Omax PC Based CNC Controller (Upgraded in 2012), 3050V Variable Speed 30HP 50KPSI Direct Drive Pump (6,136 Hours), Manual Z-Axis, Machine Has Undergone A Full Refurb & Paint May 2019.

2008 Jet Edge HR612 Waterjet Cutting System (#3307)

2008 Jet Edge HR612 Waterjet Cutting System (#3307)

6' X 12' High Rail Gantry Waterjet Cutting System with 12" Z Axis Abrasive Cutting Head, Aquavision Di PC Based Controller and Remote Pendant, Jet Edge Model iP6050 Intensifier Pump w/ 55,000 PSI Continuous Pressure, 50 HP, Sigmanest CAD/CAM Software.

2017 Techni i510-G2 Waterjet Cutting System (#3293)

2017 Techni i510-G2 Waterjet Cutting System (#3293)

5' X 10' Waterjet Cutting System with the AM2000 Controller Running Softec™ Waterjet Cutting Software, Techni Quantum NXT 55 Servo Electric Pump with 55KPSI Cutting Pressure, 500LB Bulk Abrasive Hopper and Under 2300 Power On Hours!

2005/2018 Techni 510 Waterjet Cutting System (#3291)

2005/2018 Techni 510 Waterjet Cutting System (#3291)

5’ X 10’ CNC Abrasive Waterjet Cutting System with the Intec CNC Controller, KMT 30HP 60KPSI Intensifier style Pump, 600 LB Abrasive Bulk Hopper. System Completely Rebuilt in 2018 with New Drives, Controller and Intensifier and Has Only Been Run Less than 100 Hours Since. 

2008 Flow IFB 624 Waterjet Cutting System (#3261)

2008 Flow IFB 624 Waterjet Cutting System (#3261)

6’ x 24’ Single Tank Design Dual Head Abrasive Waterjet Cutting System with Flow PC Based CNC Controller Running Flow Path 7 and Flow Cut 7, Dual Abrasive Cutting Heads, 2,000LB Abrasive Hopper, 100 HP 60KPSI Dual Intensifier Pump with 9000 Hours since Complete Rebuild and Closed Loop Chiller

2015 WardJet ZX3043-5 Waterjet Cutting System (#3221)

2015 WardJet ZX3043-5 Waterjet Cutting System (#3221)

5' X 14' Dual Table 5-Axis Waterjet Cutting System with Wardjet Dual Touch Screen CNC Controller (IKUHLU* Software Interface), Dual 50HP 60KPSI KMT Intensifier Style Pumps, (1) Full 5-Axis Abrasive Cutting Head, (1) 3-Axis Abrasive Cutting Head, Abrasive Sensors, Dual Hoppers, Water Pre-Treatment System, Live Remote Camera, Front and Back Automatic SafeWalls™ with all Work Zones Protected by Light Curtains.

1999 Calypso Shark Waterjet Cutting System (#3186)

1999 Calypso Shark Waterjet Cutting System (#3186)

6’ X 12’ Waterjet Cutting System with Rebuilt Servo Drives, New CPU for the Pump, New Seals in Pump, New Way Covers.

2008 Flow IFB-6012 Waterjet Cutting System (#3185)

2008 Flow IFB-6012 Waterjet Cutting System (#3185)

6’ X 12’ Waterjet Cutting System with New Flow Control & Software, 50HP, 60K PSI, Dynamic Cutting, 600 lb Hopper.

1998 Jet Edge 48XY Four-Head Waterjet Cutting System (#3184)

1998 Jet Edge 48XY Four-Head Waterjet Cutting System (#3184)

4’ X 8’ Four-Head Water Only Waterjet Cutting System with Fanuc Control, Chukar Four-Head Cutting, Jet-Edge 55-30, Abrasive Can be Added.

2005 Calypso Hammerhead 126 Waterjet Cutting System (#3176)

2005 Calypso Hammerhead 126 Waterjet Cutting System (#3176)

12’ X 6’ CNC Abrasive Waterjet Cutting System with Calypso Exclusive PC Based Controller Running Geomate and NC-Console Operating Software, Dual Programmable Heads, 100 HP 60KPSI Calypso Intensifier Pump with Closed Loop Cooling Unit, Remote Pendant & Abrasive Hopper.

2012 Flow Mach 4 4020b Waterjet Cutting System (#3089)

2012 Flow Mach 4 4020b Waterjet Cutting System (#3089)

6’ X 12’ Abrasive Waterjet Cutting System with 5-Axis Flow CNC Flow Cut Garnet Hopper Roll Around Control 5-Axis XD Cutting Head with Less Than 1700 Hours of Run Time.

2006 Flow IFB 6X12’ Dynamic Waterjet Cutting System (#3068)

2006 Flow IFB 6X12’ Dynamic Waterjet Cutting System (#3068)

6’ x 12’ CNC Abrasive Waterjet Cutting System with Flowmaster PC Based Controller, Dynamic Cutting Head, 50HP, 60K PSI Hyperjet Intensifier Pump and Abrasive Hopper.

2008 Flow IFB 6012 Waterjet Cutting System (#2062)

2008 Flow IFB 6012 Waterjet Cutting System (#2062)

6’ x 12’ CNC Abrasive Waterjet Cutting System with Flowmaster PC Based Controller, Dynamic Cutting Head, 50HP, 87K PSI Hyperjet Intensifier Pump, Abrasive Hopper and 7,180 Hours

2017 Omax Maxiem 2040 Waterjet Cutting System (#2059)

2017 Omax Maxiem 2040 Waterjet Cutting System (#2059)

6’ x 12’ Capacity Waterjet Cutting System with Omax PC Based Controller, Intelli-MAX Software, Omax Enduromax P5060V, 50HP 60K PSI Pump, Variable Speed Solids Removal System, Programmable Motorized Z-Axis, 700 Lb Abrasive Bulk Hopper and Less Than 300 Hours!

2010 Multicam ZERO HOUR 3000  Series Waterjet Cutting System (#1970)

2010 Multicam ZERO HOUR 3000  Series Waterjet Cutting System (#1970)

10’ X 5’ CNC Abrasive Waterjet Cutting System with Multicam EZ Controller with Integrated EZ G-Code Software / Operation System, Full Nesting Capability on Board, AC for Control Cabinet, 800 LB Bulk Abrasive hopper, 30HP 60KPSI KMT Intensifier Pump. Machine has literally ZERO HOURS on it and has never been installed since new.

2008 Flow 4020B Mach 3 Dynamic Hyperjet Waterjet (#1944)

2008 Flow 4020B Mach 3 Dynamic Hyperjet Waterjet (#1944)

12’ x 6’ CNC Abrasive Waterjet Cutting System with Flowmaster PC Based Controller, Dynamic Cutting Head, 100HP, 87K PSI Hyperjet Intensifier Pump, 500 Lb. Bulk Capacity Abrasive Hopper, Complete Closed Loop Water Recycling System, Chiller and Low Hours

1996 Flow A-Series Waterjet Cutting System (#1945)

1996 Flow A-Series Waterjet Cutting System (#1945)

5’ x 10’ Table, Flow Model 7X 60HP, 55K PSI Intensifier Pump, Paser 3 Cutting Head, Allen Bradley Series 9 Control and 300LB Bulk Abrasive Hopper.

2015 Mitsubishi/AKS X3-Series MWX3-612 Waterjet   (#1879)

2015 Mitsubishi/AKS X3-Series MWX3-612 Waterjet   (#1879)

6’ X 12’ CNC Abrasive Waterjet Cutting System with Mitsubishi M720 CNC Controller, On Board Metamation CAD/CAM System,Ultra-High Pressure 90KPSI KMT Intensifier Pump, Complete Ebbco Closed Loop Water Filtration System, Chiller and Ebbco Abrasive Removal System.
GENERAL SPECIFICATIONS

2010 Romeo Engineering Waterjet Cutting System (#1804)

2010 Romeo Engineering Waterjet Cutting System (#1804)

5’ X 10’ Silver Series Waterjet Cutting System with Romeo Windows Based PC Controller, 30 HP 60KPSI KMT Intensifier Pump, Remote Pump Controls, Long Life Steel Slat Table, HP Gage & 500 LB Bulk Abrasive Hopper with under 6K hours

Stay Up-To-Date on New Listings