Turret Punches

Filter:
Sort:
Year
Price
Capacity
2004 Murata Motorum-2044EZ Turret Punch (#4116)

2004 Murata Motorum-2044EZ Turret Punch (#4116)

22 Ton CNC Mechanical Punching System with 22 Position Turret with 4 Auto Index Stations Using 112 Positive Strip Tooling.
2013 LVD/Strippit P1212 CNC Turret Punching System (#4063)

2013 LVD/Strippit P1212 CNC Turret Punching System (#4063)

22 Ton 49” X 49” CNC Thick Style Turret Punching System with GE Fanuc Series Oi-P CNC Controller, 29 Station Thick Style Turret, 3 Auto-Index Stations, Hydraulic Oil Cooler, Complete with Tooling Included, Very Low Use
Strippit/LVD 750 SG/40 Single End Punch (#4055)

Strippit/LVD 750 SG/40 Single End Punch (#4055)

44 ton 30" x 40" travel Single End Punch with CNC Control
1994 Trumpf TC-500 Turret Punch (#4014)

1994 Trumpf TC-500 Turret Punch (#4014)

50” X 100” 25 Ton CNC Hydraulic Punching System with Bosch Trumagraph CC 220- S Controller and Full Light Guarding.
1990 Amada Aries 245 Turret Punch (#3867)

1990 Amada Aries 245 Turret Punch (#3867)

39.37" x 50" (w/o reposition) 22 Ton CNC Turret Press with Amada/ Amadan 04PA CNC Control, 20 Station turret, Auto Index Stations, Thick Style Turret, Ball Transfers in Table

1997 Strippit 1250 XP Turret Punch (#3846)

1997 Strippit 1250 XP Turret Punch (#3846)

49.2” X 49.2” Travels and 1⁄4” Max Material Thickness Turret Punch with GE Fanuc Op Control, 20 Station Thin Tooling Turret with 2 Auto-Index.
1993 Trumpf Trumatic 260T CNC Turret Punching System (#3767)

1993 Trumpf Trumatic 260T CNC Turret Punching System (#3767)

50" X 204" CNC Punching System with Bosch CC200/300 Control, 25 Rotational Tool Stations, Trumpf Tool Preset Station, Step-up Transformer, Light Curtains and Lots of Tooling and Holders.

1998 Amada Vipros 255 CNC Turret Punch (#3586)

1998 Amada Vipros 255 CNC Turret Punch (#3586)

50” X 50” 22 Ton CNC Turret Punch with GE Fanuc 18P Control Auto Repositioning Brush Table, Chip Conveyor, B-Directional Rotation, AC Servo Drive, 60 RPM.

Whitney 3400 RTC Punch/Plasma Combination Cutting System (#3566)

Whitney 3400 RTC Punch/Plasma Combination Cutting System (#3566)

8' X 5' Punch/Plasma Cutting System with Fanuc 16P CNC Controller, Tool Changer, 40 Ton Punching Capacity, Hypertherm HT 2000 LF Plasma Power Source, Loaded w/ Tooling and Consumables,Oil Changed in 2019 as well as the Touch Lead.

Amada Apelio III 357V CNC Turret Punch (#3424)

Amada Apelio III 357V CNC Turret Punch (#3424)

50” X 144” Capacity CNC Turret Punching System with Amada 04PC Controller, Auto Repositioning,  ASR48CR Punching Cell 6-Shelf System and Ball Transfer Table.

Coma 567 Turret Punch (#3423)

Coma 567 Turret Punch (#3423)

60” X 72” ⅜” Thick Capacity 55 Ton CNC Turret Punching System with 04 P.C Control, 44 Position Thick Style Turret, (2) Auto-Index Stations, Auto Repositioning, Slug Conveyor, Hydraulic Clutch and Ball Transfer Table.

JFY CNC Bus Bar Punch/Shear (#3325)

JFY CNC Bus Bar Punch/Shear (#3325)

39.37" x 39.37" 55 Ton CNC Bus Bar Punch/Shear with a Fanuc OMi Mate CNC Control, 8 Position Turret, Shear, Hydraulic Components by Bosch-Rexroth, Ball Screws and Linear Guideways.

2001 Amada 345Q Turret Punching System (#3272)

2001 Amada 345Q Turret Punching System (#3272)

40” x 50” (40” x 100” with Reposition) 33 Ton Turret Punching System with Amadan 04 PC Controller, 58 Station with 2 Auto Index Stations, (2) Holders with Ball Transfer Table

1999 Trumpf TC 2000R CNC Turret Punch (#3016)

1999 Trumpf TC 2000R CNC Turret Punch (#3016)

50" X 50" CNC Turret Punch with Bosch CNC Controls Max. Sheet Thickness .250" 20 Ton Tools 9 Bi-Direc Max. Punch Diameter 3".

Warner & Swasey (Weidemann) CNC Turret Punch (#1916)

Warner & Swasey (Weidemann) CNC Turret Punch (#1916)

40” X 40” CNC Turret Punching System with updated PC Controls CNC Controller, 47” X 72” Ball Transfer Table, Chip Conveyor, Loaded with Tooling and Includes Spare Parts.  Inspect in plant and under power.

1997 Strippit Super 750/40 SGFabricator with Smart Gage - Single End Punch System #1112

1997 Strippit Super 750/40 SGFabricator with Smart Gage - Single End Punch System #1112

30” X 40” CNC PUNCHING SYSTEM WITH STRIPPIT PC BASED CNC CONTROLLER ONE PIECE C FRAME CONSTRUCTION, HYDRAULIC PRESS DRIVE, PC TECHNOLOGY, COLOR SVGA MONITOR, 3.5", DISC STORAGE AND RS232, PARTS VERIFICATION, GEOMETRIC GRID, , STROKE SELECTOR, SINGLE, AUTOMATIC,
MANUAL DATA INPUT MODES, INCH/METRIC PROGRAMMING, 1-1/4" AND 3-1/2" HOLDERS, ASSORTED TOOLING AND (2) TOOL HOLDERS AND ASSORTED TOOLING INCLUDED

Stay Up-To-Date on New Listings