2.953” X 13’ Plate Roll with Additional Top and Bottom Rolls
5/8" X 10' 4 Roll Plate Roll with CNC Graphical & Networkable Controller, Cone Bending Device, Induction Hardened Rolls, Digital Display for Both Side Rollers, Machine Body is Steel (st-52) Construction, Separate Control Panel with Variable Speed Control.
1-⅛” X 10’ Four - Roll Plate Roll with AK 400 CNC Control System, Cone Rolling Device, Induction Hardened Rolls, Two Rolling Speeds and Oil Cooler.
5/16" X 6' 4-Roll Plate Roll with Drop-End for Easy Parts Removal and Overhead Support
4' X 11GA Plate Roll with Cast Iron Frame, Central Rollers, Cone Bending Device, Self Braking Main Motor and Remote Emergency Stopping w/ Safety Trip Wire.
10’ X 11 GA Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
6’ X 9/32" Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
10' X 1/2" Mechanical Plate Roll with Hand Control, Initial Pinch, 12" Diameter Roll, Air Drop End, Power Rear Roll Adjustment and 440V / 3 Phase
1/2" x 8' CNC Plate Roll with AK400 CNC Controls, Variable Speed, Induction Hardened Roll, Cone Bending Device and Prepared for Side and Top Support
2.36” X 120” Hydraulic 3-Roll Plate Roll with Hydraulic Drop End, Independently Powered Hydraulic Rolls, Variable Rolling Speeds, Hydraulic Roll Adjustment, Induction Hardened Rolls, Cone Rolling Package and Digital Display
5/16” X 6’ Four-Roll Hydraulic Plate Roll with Cone Bending Device, Induction Hardened Rolls, Digital Display for Side Rolls, Fully Welded Steel (St-52) Construction Body, Separate Moving Control Panel, Two Rolling Speeds, Electro-Hydraulic Calibration, all Rolls are Mounted in Roller Spherical Roller Bearings, Safety Equipment Around the Machine, Central Rolls are Driven by Hydraulic Motors and Planetary Gearboxes, Dual Voltage, Side and Top Support Ready, Variable Speed of Rotation.
1/2" X 10' 4-Roll Plate Rolling Machine with Cone Bending Device, Induction Hardened Rolls, Digital Display for Side Rolls Fully Welded Steel (ST-52), Construction Body, Separate Moving Control Panel, Two Rolling Speeds, Electro-Hydraulic Calibration, All Rolls are Mounted In Roller Spherical Roller Bearings, Safety Equipment Around the Machine, Central Rolls are Driven by Hydraulic Motors and Planetary Gearboxes and Ce, Iso 9001 - 2008, Tsek, and Turqum Certified Machine.
5’ X 1/4" Bending Capacity (3/16” Pre-Bend) Plate Roll with Powered Back Roll, Cone Bending Device, Hardened & Polished Rolls, Top Roll Swings to Side for Easy Material Removal, Asymmetrical Design for Perfect Bending, for Perfect Result Top and Bottom Rolls are Driven by Quite Electric Motor and Planetary Gearboxes in Gear System (no hydraulics), in accordance with CE Norms, and Portable Control Panel in Order to Control the Machine from Required Locations.
5/16" x 6' 3-Roll Asymmetrical Plate Roll With Back Roll W/ Motor, Cone Bending Device, Hardened and Polished Rolls, Body is Made of St 52 Steel, Opening Top Roll to Side After Bending for Taking Out The Material Easily, Asymmetrical Design For Perfect Bending, and for Perfect Result Top and Bottom Rolls are Driven By Brake Electric Motor and Planetary Gearboxes in Gear System.
9/32" X 6' 3-Roll Initial Pinch Plate Roll with Back Roll w/ Motor, Cone Bending Device, Hardened and Polished Rolls, Body is Made of St 52 Steel, Opening Top Roll To Side After Bending for Taking Out the Material Easily, Asymmetrical Design for Perfect Bending, Top and Bottom Rolls Are Driven by Brake Electric Motor and Planetary Gearboxes in Gear System, In Accordance w/ Ce Norms, Portable Control Panel in Order to Control the Machine From Required Locations.
1/2" X 10' 4-Rolls Plate Rolling Machine with Cone Bending Device, Induction Hardened Rolls, Digital Display For Side Rolls, Fully Welded Steel (ST-52) Construction Body, Separate Moving Control Panel, Two Rolling Speeds, Electro-Hydraulic Calibration, All Rolls Are Mounted In Roller Spherical Roller Bearings, Safety Equipment Around The Machine, Central Rolls Are Driven By Hydraulic Motors And Planetary Gearboxes.
5/16" X 10' Four-Roll Hydraulic Plate Roll with Cone Bending Device, Induction Hardened Rolls, Digital Display for Side Rolls, Fully Welded Steel (St-52) Construction Body, Separate Moving Control Panel, Two Rolling Speeds, Electro-Hydraulic Calibration, all Rolls are Mounted in Roller Spherical Roller Bearings, Safety Equipment Around the Machine, Central Rolls are Driven by Hydraulic Motors and Planetary Gearboxes.
5/16" x 10' Four-Roll Hydraulic Plate Rolling Machine with Cone Bending Device Induction Hardened Rolls, Digital Display for Side Rolls, Fully Welded Steel (St-52) Construction Body, Separate Moving Control Panel, Two Rolling Speeds, Electro-Hydraulic Calibration, all Rolls are Mounted in Roller Spherical Roller Bearings, Safety Equipment Around the Machine, Central Rolls are Driven by Hydraulic Motors and Planetary Gearboxes.
9/32" X 5' Four-Roll Hydraulic Plate Rolling Machine with Cone Bending Device, Induction Hardened Rolls, Digital Display For Both Rollers, Steel (ST-52) Machine Body, Separate Control Panel, 2 Speed Control, All Rollers Mounted in Bearing, Drop End Control, Cone Open & Close From Panel, Calibration, and Safety Equipment Around the Machine.
5/16" X 7' 3-Rolls Hydraulic Plate Roll with Hardened Rolls, Digital Display, Steel (ST-52) Machine Body, Separate Control Panel, Movement & Parallelism Adjustment of Rollers from Control Panel.
1/4" X 4' Three Rolls Initial Pinch Plate Rolling Machine with Digital Readout, Hardened Rolls, Motorized Back Roll, Dual Voltage, Durable Cast Iron Frame, Powered Central Rollers, Cone Bending Device, Self Brake Motor, Openable Upper Roll, Option To Power Lower and Back Roll, and Separate Electric Control Panel W/ Foot Pedal.
11 GA X 4’ Plate Roll with Digital Display, Induction Hardened Rolls.
6’ X 5/16” Plate Roll with Digital Display, Cone Bending Device, Two Speed Control, Induction Hardened Rolls and Separate Control Panel.
61” X 5” 3-Roll Plate Roll with Manual Operation Hand-Wheels for Rear and Lower Roll Adjustment, Conical Bending Device, Asymmetrical Mounted Rolls, Dual Foot Switch Control.
4’ X 8 Ga Plate Roll with Forward and Reverse Foot Pedal, 3 HP 220-Volt 3-Phase Motor, Digital Readout, Hardened Rolls.
10’ X 5/16” 4 Roll Plate Roll with Oil Cooler, Variable Speed, Prepared for Future Side/Top Supports.
8’ X 6.7" Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
6’ X 6.7" Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
5’ X 6.7" Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
6’ X 5.5" Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
5’ X 5.5" Plate Roll with Separate Moving Control Panel, Induction Hardened Rolls, Motorized Back Roll, Central Rollers Powered by Electric Motor & Gear Box.
13’ X ⅜” 4 Roll Hydraulic Plate Roll with Induction Hardened Rolls, Torsion Bar, Digital Display, Cone Bending Device, Two Speed Control, Separate Control Panel.
6’ X .275” Initial Pinch 3-Roll Asymmetrical Plate Bending Machine with Digital Display, Induction Hardened Rolls, Lower Roll w/ Motor.
¼” X 4’ 4-Roll Plate Roll with Torsion Bar, Digital Display, Cone Bending Device, Two Speed Control, Free Standing Control Panel.
1” X 10’ 4-Roll Plate Roll with AK400 CNC Control, Oil Cooler, Hardened and Ground Roll, Variable Speed of Rotation, Prepared for Top/Side Supports.
½” X 10’ 4-Roll Plate Roll with Hardened and Ground Rolls, Variable Speed of Rotation, Prepared for Top/Side Supports.
½” X 8’ 4-Roll Plate Roll with Two Speed Control, Optional Separate Control Panel, Cone Bending Device, Induction Hardened Rolls.
¾” X 10’ Four-Roll Plate Rolling Machine with AK400 CS6 CNC Control, Variable Speed of Rotation, Prepared for Overhead and Side Supports, Oil Cooler, Induction Hardened Rolls, Two Speed Control.
6.3” X 5.5” X 4.7” Plate Roll with AHS 15/06 4-Roll Plate Bending Hardened Rolls, Oil Cooler, Variable Speed, Prepared for Future Side/Top Supports.
⅜” X 6’ 4-Roll Plate Bending Roll with Manual PLC Based controls, 10 HP Motor, Hardened Rolls, Oil Cooler, Variable Speed, Prepped for Side/Top Supports.
