6’ X 12’ 4,400 Watt CO2 Laser Cutting System with Bystronic CNC Controller, Complete Controller PC Upgrade, Pallet Shuttle, Chiller and Dust Collector Included.
50" X 50" Laser Cutting System with E-1000 Laser Source, Digital Laser Power Control, Vision Alignment System ($14,500), XG-7000 Fully Integrated Into HMI Software, Full Look Ahead Contouring Capability, Bed Vacuum Material Hold-Down Plenum & Part Collection Drawer, Cooling External Chiller, Cut and Engraved Stainless Steel.
5' x 10' Dual Pallet CNC Laser Cutting System 3200 Watt with Siemens Sinumerik CNC Control, Auto Shuttle Tables, Liftmaster Loader/Unloader Flying Optic Design, and Scrap Conveyor.
5' X 10' 4.0KW CO2 CNC Laser Cutting System with Amada AMNC/F CNC Controller, Fanuc C4000i Resonator, Chiller, Farr Dust Collector, Dual Pallet and Pull Out Scrap Containers.
5' x 10' Dual Pallet CNC Laser Cutting System with Siemens Sinumerik 840 D CNC Control, Auto Shuttle Tables, Liftmaster Loader/Unloader Flying Optic Design, 3-¾” Cutting Head and Scrap Conveyor.
4’ X 10’ Laser Cutting System with Trumpf CNC Control System, Trumpf TCF 2000 Watt CO2 Resonator, Integrated Load/Unload System, Dust Collector & Chiller.
8.5" Dia.’ X 27’ 3.5KW CO2 Tube Laser Cutting System with Siemens 840 D Control, Dust Collector, Closed Loop Chiller, Rear Scrap Conveyor, High Speed Piercing, Tilt Head Cutting, Breakthrough Pierce Detection, Tube Twist and Bow Correction.
5’ X 10’ 4KW Laser Cutting System with Amada AMNC/F CNC Controller, Auitoloading/.Unloading Material Tower (FMS) Fanuc C4000i-C 4000 Watt (4KW) Laser Resonator, Chiller, Farr Dust Collector and Pull Out Scrap Containers.
5’ X 10’ 4.0KW CNC Laser Cutting System with Fanuc 160i-LB CNC Controller, Fanuc CO2 Laser Resonator, Precitec Cutting Head, Dual Pallets, Chiller and Dust Collector.
5” X 4” OD / .25 ID Tube Cutting System with Siemens CNC Controller, Rofin Sinar 2500 Watt CO2 Resonator, 8,800Lb. Bundle Loader, Dust Collector, and Front Unload Parts Conveyor for Parts Up to 15' Long Donaldson Chiller.
5’ X 10’ CO2 Laser Cutting System with Amada AMNC-F Controller, Farr Gold Series Dust Collector, Dual Shuttle Table, Chiller, High Pressure Assist Gas.
5’ X 10’ CNC Laser Cutting System with Mazak Mazatrol L32B CNC Control, 2500 Watt Panasonic Resonator YB-L250A8M4E, Non Contact Head, Orion Chiller, Slug Conveyor System, Transformer.
5’ X 10’ CO2 Laser Cutting System with Amada AMNC-F Controller, Farr Gold Series Dust Collector, Dual Shuttle Table, Chiller, High Pressure Assist Gas.
5’ X 10’ 5KW CO2 Laser Cutting System with Siemens 840D SINUMERIK Control, Dust Collector, Dual Shuttle Table, Chiller, High Pressure Assist Gas.
5’ X 10’ 4KW CO2 Laser Cutting System with Siemens 840D SINUMERIK Control, Dust Collector, Dual Shuttle Table, Chiller, High Pressure Assist Gas.
5’ X 10’ 5KW CO2 Laser Cutting System with Siemens 840D SINUMERIK Control, Dust Collector, Dual Shuttle Table, Chiller, High Pressure Assist Gas.
The BLM LT-FREE FIVE-AXIS LASER CUTTING SYSTEM is more than just a laser. With the freedom to laser cut 3D Parts AFTER they have been formed manufacturer's are now unconstrained with the options in formed areas of tubing.Bent tubes, hydroformed components, tubular assemblies or stamped parts. The LT-FREE 5-axis laser cutting machine is perfect for processing any 3D part with high precision and excellent cut quality.
The BLM LC5 COMBO LASER CUTTING SYSTEM is the perfect match of productivity and affordability. With capabilities of cutting a sheet up to 20' X 6.5' and in the same machine processing a tube up to 4.75" The COMBO provides unique capabilities to shops with a mixture of tube and sheet cutting. Both processes are fully automated allowing the LC5 COMBO to run unattended for hours of production.
The BLM LS5 LASER SHEET CUTTING SYSTEM is one of the markets’ most complete solutions, designed to evolve with your needs. No worries about the space required as the BLM LS5 has a very compact and configurable modular layout to fit the available space. Capabilities to shuttle feed from the rear or side of the machine allow flexibility found in no other fiber laser cutting system. Also additional capabilities allow for adding a fully automated tube loading, cutting and unloading system can be added at any time in the future which is unique to BLM. The unique design of the tube cutter shares the same laser and cutting head and axis of the sheet laser. This gives you a low cost entry into automated tube cutting or satisfies the demands of your production mix when the need for two separate laser systems is not justified.
The BLM LT24 LASERTUBE cutting system is the largest capacity system, at up to 24" Diameter, available on the market today in Tube and Pipe Laser Cutting machinery. Capable of handling sections up to 60' in length this is the equipment for 3D laser cutting of large diameter tubes and structural beams in steel, aluminum or brass. The LT24 is the right technology for H and IPE laser cutting, but also for the production of sections for agricultural and industrial vehicles. The BLM LT24 LASERTUBE can also be combined with a full automatic drill and tapping unit for threading holes up to M16 (.625”) eliminating the need to separate tapping operations.
The BLM LT14 LASERTUBE is an innovative powerhouse in large capacity cutting. This is the equipment for 3D laser cutting of large diameter tubes and structural beams in steel, aluminum or brass. The LT14 is the right technology for H and IPE laser cutting, but also for the production of sections for agricultural and industrial vehicles. The BLM LT14 LASERTUBE can also be combined with a full automatic drill and tapping unit for threading holes up to M16 (.625”) eliminating the need to separate tapping operations.
A small, simple yet extremely robust Laser tube processing system, the BLM LT5 LASERTUBE is a convenient way to approach tube laser cutting. Fiber laser cutting system for pipes processing up to 120 mm (4.75”) in diameter. the LT5 is the compact machine in the Lasertube family designed for continuous production of small diameter and thin wall tubes.
The BLM LT722D LASERTUBE machine provides the highest reliability available today and one-of-a-kind flexibility in a CO2 laser. This laser cutting system is designed to cut special shaped tubes and profiles or open section without any special equipment. When on some applications the most suitable laser source is CO2 the BLM LT722D LASERTUBE has your needs covered for all the materials you need to cut.
The BLM LT7 LASERTUBE is the next generation Laser tube cutting system from the leaders in tube processing, BLM GROUP. The LT7 has a capability of cutting up to 6.0" diameter and 27' stock lengths. This is the new benchmark of which all other tube laser cutting systems will be defined by. Laser cutting accuracy at high accelerations without compromise due to the system’s engineered robust mechanical stiffness. The best solution to boost tube and profiles processing. With Active Tilt the orientation movement of the cutting head allows you to achieve unimaginable productivity, especially when cutting thin-wall materials.
6’ X 12’ 4KW Laser Cutting System with Fanuc 160iL Controller, Fanuc AF 4000C 4000 Watt (4KW) Laser Resonator, Chiller, Dust Collector and Pull Out Scrap Containers, in Plant Under Power.
5’ X 10’ 3.0KW (3,000 Watt) Fiber Laser Cutting System with Trumpf/Siemens CNC Controller, TruDisk 3001 3KW Resonator & Automatic Front Loading Pallet Changer.
5’ X 12’ Laser Cutting with Laser Control System w/ Auto Height Sensing, 3 KW IPG YLS-3000 Resonator, IPG Fiber Optic Cable Beam Delivery to Cutting Head, Dual Pallet Electrically Driven Shuttle System for Material Table, Work Area Fully Enclosed for Safety, “Laser Safe” Windows for Viewing, Auto Focus Cutting Head, Chiller, Proportional Control Valves for N2 and 02 Assist Gasses, Powered Dual Shuttle Table. MADE IN AMERICA!
5’ X 12’ Laser Cutting with Laser Control System w/ Auto Height Sensing, 2 KW IPG YLS-2000 Resonator, IPG Fiber Optic Cable Beam Delivery to Cutting Head, Dual Pallet Electrically Driven Shuttle System for Material Table, Work Area Fully Enclosed for Safety, “Laser Safe” Windows for Viewing, Auto Focus Cutting Head, Chiller, Proportional Control Valves for N2 and 02 Assist Gasses, Powered Dual Shuttle Table. MADE IN AMERICA!
5’ X 12’ Laser Cutting with Laser Control System w/ Auto Height Sensing, 1.5 KW YLR-1500 IPG Resonator, IPG Fiber Optic Cable Beam Delivery to Cutting Head, Dual Pallet Electrically Driven Shuttle System for Material Table, Work Area Fully Enclosed for Safety, “Laser Safe” Windows for Viewing, Auto Focus Cutting Head, Chiller, Proportional Control Valves for N2 and 02 Assist Gasses, Powered Dual Shuttle Table. MADE IN AMERICA!
6’ X 13’ Laser Cutting System with Cincinnati CNC Controls, Windows NT Operating System, GE Fanuc 4000 Watt Fast Axial Flow Resonator, High Speed Linear Brushless Motors, Air Dryer, Fume Blower, Rapid Pierce, Aluminum Honeycomb Gantry, Safety Mats.
5’ X 10’ Dual Pallet Shuttle Fiber Laser Cutting System with DXF-to-Part Easy to Use PC Based Controller (No Complex CAD/CAM System Required), IPG Direct Diode Resonator with Capability for Cutting and Engraving in Stainless/Mild Steel/Aluminum/Brass/Copper and Laminated Foils, System Includes Installation, Training and Warranty as well as Optional Power Sources and Filtration Equipment. Available in 3 Different Capacities up to ¾” Mild Steel.
5’ X 5’ Dual Pallet Shuttle Fiber Laser Cutting System with DXF-to-Part Easy to Use PC Based Controller (No Complex CAD/CAM System Required), IPG Direct Diode Resonator with Capability for Cutting and Engraving in Stainless/Mild Steel/Aluminum/Brass/Copper and Laminated Foils, System Includes Installation, Training and Warranty as well as Optional Power Sources and Filtration Equipment. Available in 3 Different Capacities up to ¾” Mild Steel.
4’ X 10’ 2.0KW (2000 Watt) CO2 Laser Cutting System with Siemens 840D CNC Controller, Trumpf TCF 2000 Watt CO2 Resonator, Integrated Load/Unload System, Dust Collector & Chiller.=
5’ X 10’ Fiber Laser Cutting System Available in 1.0KW to 2.5KW with Windows CNC Control, ProNEST® LT 2019 Programming Software, Shuttle Table with Two (2) Pallets, Red Diode Laser Pointer, Automatic Lubrication System with Timer, Automatic Cutting Gas Control and Proportional Valve.
5’ X 10’ 4.0KW (4,000 Watt) CNC Laser Cutting System with Mazatrol Preview CNC Control, Linear Drives, Nozzle and Head Cleaning/Inspection/Changing for Complete Unmanned Operation with 18,000 Hours of Laser On Time.
78” X 157” 3kw (3,000 Watt) CNC Fiber Laser Cutting System with Titan PC/CNC Based Controller, IPG Photonics YLS-3000 3KW (3000 Watts) Diode Resonator, Riedel Chiller, Kemper Dust Collector and Less Than 5900 Hours of Use.
5’ X 10’ 4KW Laser Cutting System with Amada AMNC/F CNC Controller, Fanuc C4000i-C 4000 Watt (4KW) Laser Resonator, Chiller, Farr Dust Collector and Pull Out Scrap Containers.
5’ X 10’ 4KW Laser Cutting System with Amada AMNC/F CNC Controller, Fanuc C4000i-C 4000 Watt (4KW) Laser Resonator, Chiller, Farr Dust Collector and Pull Out Scrap Containers.
5’ X 10’ 4KW Laser Cutting System with Amada AMNC/F CNC Controller, Fanuc C4000i-C 4000 Watt (4KW) Laser Resonator, Chiller, Farr Dust Collector and Pull Out Scrap Containers.
Brand New 5’ X 10’ Dual Pallet Shuttle Fiber Laser Cutting System with DXF-to-Part Easy to Use PC Based Controller (No Complex CAD/CAM System Required), IPG Direct Diode Resonator with Capability for Cutting and Engraving in Stainless, Mild Steel, Aluminum, Brass, Copper and Laminated Foils.
160” X 80” 5KW (5,000 Watts) CNC Laser Cutting System with Siemens 840D CNC Control, 5000 Watt Trumpf TLF Resonator, Liftmaster Integrated Load / Unload System, Dual Tower Sheet Storage Unit and Chiller.
5’ X 10’ 1KW Fiber Laser Cutting System with GE Fanuc 16L Control, IPG YLS-1000 Resonator (New in 2009). Dual Pallet Shuttle System and Chiller.
6’ X 10’ Fiber Laser / Plasma Combo Cutting System with Messer Global Touch Screen Controller, 2.6KW Fiber Laser Resonator (New in 2014), Alignment Camera, HPR-400XD Hi-Definition Plasma Power Source with Tru-Hole Technology, Slagger Self Cleaning Downdraft Table, Chiller and Dust Collector
5’ X 10’ 4KW (4,000 Watts) CNC Laser Cutting System with Fanuc 160i-LB CNC Controller, 10 Shelf Auto Load/Unload System, Chiller and Dust Collector
5’ X 10’ 4.0KW (4,000 Watt) CO2 Laser Cutting System with Mazak L32B CNC Controller, Panasonic YBL400 Resonator, Non Contact Head, Orion Chiller, Slug Conveyor and Transformer.
