33.5” X 47 – 5/8” Capacity Radial Drill Press with Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base Casting, Box Table, Integrated Coolant System and Worklight
- Diameter of column: 8-1/4"
- Distance from column surface to spindle center, max: 33-1/2"
- Distance from column surface to spindle center, min.: 8-5/8"
- Travel of spindle head: 24-7/8"
- Distance from base surface to spindle end, max.: 47-5/8"
- Distance from base surface to spindle end, min.: 13-3/4"
- Elevating height of arm: 25-9/16"
- Effective area of table: 19-3/4" x 15-3/4" x 15-3/8"
- Dimensions of base: 49-5/8" x 25-3/16" x 9/32"
- Taper hole in spindle: #4 MT
- Stroke of spindle: 8-1/4"
- R.P.M. of spindle (rpm range x steps): 88-1500 x 6 Steps
- Feed of spindle (1PR x steps): 0.002"-0.006" x 3 Steps
- Main motor (HP): 3 HP
- Elevating motor (HP): 1 HP
- Clamping motor for column and gear-box (HP): Manual Clamp
- Clamping motor for arm (HP): Manual Clamp
- Coolant pump (HP): 1/8 HP
- Machine height from floor, max. 91-3/8"
- Approximate Dimension (LxWxH): 66"x32"x86"
- Approximate Shipping weight : 3,080 Lbs.
- Voltage: 220 or 440V (Must Specify)
- Hardened and Ground Arm Slideways
- Arm Elevation is controlled by Electric Motor
- Safety Device prevents arm from dropping
- T-Slots and Drain Channels on casting
- Hardened and Ground Gears
- Box Table
- Coolant System
- Wired 220V or 440V. Please Specify.
***All Price, Location and Specifications Subject to Change without Notice***
MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.