48.5” X 54” Capacity Radial Drill Press with #4MT, 1500 RPM 5HP Spindle Drive, Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base Casting, Box Table, Integrated Coolant System and Worklight

STANDARD EQUIPMENT:

• Diameter of column: 11-13/16"
• Distance from column surface to spindle center, max: 48-1/2"
• Distance from column surface to spindle center, min.: 13-3/8"
• Travel of spindle head: 35"
• Distance from base surface to spindle end, max.: 54"
• Distance from base surface to spindle end, min.: 19-3/8"
• Elevating height of arm: 34-5/8"
• Effective area of table: 27-5/8" x 19-5/8" x 15-3/4"
• Dimensions of base: 67-11/16" x 27-15/16" x 6-1/2"
• Taper hole in spindle: #4 MT
• Stroke of spindle: 9-7/8"
• R.P.M. of spindle (rpm range x steps): 44-1500 x 12 Steps
• Feed of spindle (1PR x steps): 0.002"-0.006" x 3 Steps
• Main motor (HP): 5 HP (2 Speed Motor)
• Elevating motor (HP): 1 HP
• Clamping motor for column and gear-box (HP): 1 HP
• Clamping motor for arm (HP): 1HP
• Coolant pump (HP): 1/8 HP
• Machine height from floor, max. 109-1/2"
• Approximate Dimension (LxWxH): 80" x 39" x 89"
• Approximate Shipping weight: 4,950 Lbs.
• Voltage: 220 or 440V (Must Specify)

FEATURES:

• Hardened and Ground Arm Slideways
• Arm Elevation is controlled by Electric Motor
• Safety Device prevents arm from dropping
• T-Slots and Drain Channels on casting
• Hardened and Ground Gears
• Box Table
• Coolant System
• Worklight
• Toolbox
• Wired 220V or 440V. Please Specify.

Factory Specifications Linked Here

Factory Brochure Linked Here

***All Price, Location and Specifications Subject to Change without Notice***

MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.