80 Ton Ironworker with 1000mm Ruled Length Stop, Easy Change Punch Holder / Ring / Adapters, Swing Away Punch Stripper, Universal Die Bolster (For Punching Flats, Angle, & Flanges of Channel and I Beams), Blades for Cropping Angle, Blades for Cropping Round & Square, Blades for Shearing Flat Bar, Rectangular Notch Punch & Dies, Supports for Tables, Squaring Guide for Shear, Remote Foot Pedal Control and Automatic Overload Relief.

GENERAL SPECIFICATIONS 
Punching
Punch:                            1.10” X 0.59” 
Diameter X Thickness:                    1.49” X 0.55”
Stroke Length:                        2.16”
Standard Throat Depth:                    8.66”
Largest Hole (Standard Equipment):            1.49”
Largest Hole (Optional):                    4.33”
Max Section:                            6.29”
Working Height:                        38.97”

Shearing
Flat Bar Max Thickness:                    7.87” X 0.78”
Flat Bar Max Width:                        11.81” X 0.59”
Angle Flange Trim:                        3.14”
Working Height:                        38.97”

Angle Cutting
90° Angle Cut:                        4.72”
45° Mitre:                            3.14” X 0.31”
Working Height:                        46.85”

Section Cutting
Round / Square:                        1.57” / 1.37”
Channel / Beam:                        4.01” X 2”
Tee:                                2.99” X 0.39”

Notching
Material Thickness:                        0.47”
Width - Rectangular:                    1.65”
Depth Rectangle:                        3.93”
Depth Vee:                            2.36”
Angle Flange:                        3.93” X 0.47”

Corner Notch
Max Capacity:                        5.9” X 0.15”

Tube Notch
Max Diameter:                        2.36” 

Bending
Sheet Bending Max Capacity:                5.9” X 0.19”
Bar Bending on Notched End:                5.9” X 0.47”

Punching at the Notch Station
Throat Depth:                        4.33” 
Max Capacity:                        0.94” X 0.47”

Dimensions and Power
Throat Depth:                        4.33”
Max Capacity:                        0.94” X 0.47”

INCLUDES: 1000mm Ruled Length Stop, Easy Change Punch Holder / Ring / Adapters, Swing Away Punch Stripper, Universal Die Bolster (For Punching Flats, Angle, & Flanges of Channel and I Beams), Blades for Cropping Angle, Blades for Cropping Round & Square, Blades for Shearing Flat Bar, Rectangular Notch Punch & Dies, Supports for Tables, Squaring Guide for Shear, Remote Foot Pedal Control and Automatic Overload Relief.

OPTIONAL ADDITIONS
Bar Bending Unit
Channel / Beam Web Bolster 
Large Hole Attachment 
Tooling Quick Change

***All Price, Location and Specifications Subject to Change without Notice***