65 Ton Ironworker with 1000mm Ruled Length Stop, Easy Change Punch Holder / Ring / Adapters, Swing Away Punch Stripper, Universal Die Bolster (For Punching Flats, Angle, & Flanges of Channel and I Beams), Blades for Cropping Angle, Blades for Cropping Round & Square, Blades for Shearing Flat Bar, Rectangular Notch Punch & Dies, Supports for Tables, Squaring Guide for Shear, Remote Foot Pedal Control and Automatic Overload Relief.

GENERAL SPECIFICATIONS 
Punching
Punching:                        1.10” X 0.59”
Diameter X Thickness:                1.49” X 0.43”
Stroke Length:                    2.16”
Standard Throat Depth:                8.66”
Largest Hole (Standard Equipment):        1.49”
Largest Hole (Optional Equipment):        4.33”
Maximum Section:                    6.29”

Shearing
Flat Bar Max Thickness:                7.87” X 0.78”
Flat Bar Max Width:                    11.81” X 0.59”
Angle Flange Trim:                    3.14” X 0.39”
Working Height:                    37”

Angle Cutting
90° Cut:                        4.72” X 0.47”
45° Mitre Cut:                    3.14” X 0.31”
Working Height:                    44.88” 

Section Cutting
Round / Square:                    1.57” / 1.37”
Channel / Beam:                    4.01” / 2”
Tee:                            2.99” X 0.39”

Notching
Material Thickness:                    0.39”
Width - Rectangular:                1.65” 
Depth - Rectangular:                3.93”
Depth Vee:                        2.36” 
Angle Flange:                    3.93” X 0.39”

Corner Notch
Max Capacity:                    5.90” X 0.15”

Tube Notch
Max. Diameter:                    2.36”

Bending
Sheet Bending Max Capacity:            5.90” X 0.15”
Bar Bending on Notch End:                5.90” X 0.47”

Punching at the Notch Station
Throat Depth:                    4.33” 
Maximum Capacity:                    0.78” X 0.47”

Dimensions and Power
Motor Power:                        5.36 HP
Net Weight:                        2,760 Lbs
Gross Weight:                    3,020 Lbs
Machine Dimensions:                60” X 24” X 67”
Packed Dimensions:                    66” X 31” X 75”


INCLUDES: 1000mm Ruled Length Stop, Easy Change Punch Holder / Ring / Adapters, Swing Away Punch Stripper, Universal Die Bolster (For Punching Flats, Angle, & Flanges of Channel and I Beams), Blades for Cropping Angle, Blades for Cropping Round & Square, Blades for Shearing Flat Bar, Rectangular Notch Punch & Dies, Supports for Tables, Squaring Guide for Shear, Remote Foot Pedal Control and Automatic Overload Relief.

OPTIONAL ADDITIONS
Bar Bending Unit
Channel / Beam Web Bolster 
Large Hole Attachment 
Tooling Quick Change

***All Price, Location and Specifications Subject to Change without Notice***