50 Ton Ironworker with 1000mm Ruled Length Stop, Easy Change Punch Holder / Ring / Adapters, Swing Away Punch Stripper, Universal Die Bolster (For Punching Flats, Angle, & Flanges of Channel and I Beams), Blades for Cropping Angle, Blades for Cropping Round & Square, Blades for Shearing Flat Bar, Rectangular Notch Punch & Dies, Supports for Tables, Squaring Guide for Shear, Remote Foot Pedal Control and Automatic Overload Relief.

GENERAL SPECIFICATIONS 

Punching
Punching:                        0.9” X 0.59”
Diameter X Thickness:                1.49” X 0.35”
Stroke Length:                    2.16”
Standard Throat Depth:                8.66”
Largest Hole - Standard Equipment:        1.49”
Largest Hole (Optional):                4.33”
Maximum Section:                    6.29”
Working Height:                    37”

Shearing
Flat Bar Max Thickness:                7.87” X 0.6”
Flat Bar Max Width:                    11.81” X 0.51”
Angle Flange Trim:                    3.14” X 0.39”
Working Height:                    37”

Angle Cutting
90° Cut:                        3.93” X 0.39”
45° Mitre Max 45°:                    2.75” X 0.23”
Working Height:                    44.88”

Section Cutting
Round / Square:                    1.37” / 1.18”
Channel / Beam:                    4” / 2”
Tee:                            2.99” X 0.39”

Notching
Material Thickness:                    0.39”
Width Rectangular:                    1.65”
Depth Rectangular:                    3.54”
Depth Vee:                        2.36”
Angle Flange:                    3.54” X 0.39”

Corner Notch
Max. Capacity:                    5.9” X 0.118”

Tube Notch
Max. Diameter:                    2.36”
Bending
Sheet Bending Capacity:                5.9” X 0.19”
Bar Bending on the Notch End:            5.9” X 0.47”

Punching at the Notch Station
Throat Depth:                    4.33”
Max. Capacity:                    0.7” X 0.47”

Dimensions and Power
Motor Power:                        5 HP
Net Weight:                        2,745 Lbs
Gross Weight:                    3,009 Lbs
Machine Dimensions:                60” X 24” X 67” 
Packed Dimensions:                    65” X 30” X 75”

INCLUDES: 1000mm Ruled Length Stop, Easy Change Punch Holder / Ring / Adapters, Swing Away Punch Stripper, Universal Die Bolster (For Punching Flats, Angle, & Flanges of Channel and I Beams), Blades for Cropping Angle, Blades for Cropping Round & Square, Blades for Shearing Flat Bar, Rectangular Notch Punch & Dies, Supports for Tables, Squaring Guide for Shear, Remote Foot Pedal Control and Automatic Overload Relief.

OPTIONAL ADDITIONS
Bar Bending Unit
Channel / Beam Web Bolster 
Large Hole Attachment 
Tooling Quick Change

***All Price, Location and Specifications Subject to Change without Notice***