8'8" X 10’ 8” Plate Processing System with Kinetic PC Based CNC Controller, Hypertherm XPR300 Hi Definition Bevel Cutting Plasma Cutting System, Oxy-Fuel Cutting System, 20 HP 40 Taper Spindle, 24 Station Automatic Tool Magazine, Laser Pointer, Thru Spindle Cooling, Heavy Duty Self-Cleaning Downdraft Table, Chip Extraction, Dust Collector, Pneumatic & Inkjet Marking System.

GENERAL SPECIFICATIONS

  • Cutting Width: 8'8"
  • Cutting Length: 10'8" (Can be extended)
  • Maximum Rapids: 800 in/min
  • Drilling Spindle: 
  • Spindle HP: 20Hp 
  • Max Spindle RPM: 4000 rpm ( Drilling to 2” ,  Tapping to 1”)
  • Spindle Taper: BT40
  • Spindle Drive:  AC Servo vertical drive coupled to a ball-screw
  • Spindle Drive Type: High Z axis travel also allows for fabrications to be drilled
  • Machining Clamp: Clamp foot
  • # of Tools: 24 Position Tool Magazine
  • Tool Changer Type: Rotary Side Mount  Style 
  • Tool Length Measurement: Automatic tool length sensing 
  • Tool Changes: Both Automatic and Manual Tool Changing Spindle Coolant: Includes optional high pressure thru spindle coolant to 500PSI 

Note: This option is essential for deep hole drilling (3 x diameter deep) here the coolant pushes drill chips and also for hard plate drilling. Additionally in general operation this option has significant tool life improvements over mist cooling.

Plasma Head: 

  • Number of Plasma Torches: 1
  • Plasma Power Source Make: Hypertherm
  • Plasma Power Source Model: HPR 300
  • Plasma Power Source Amperage: 300
  • Plasma cutting Capacity: Mild Steel Up to 3” ⅛” (2” Production Rated)
  • Contour/Bevel Cutting: Automated Contour Bevel
  • The Kinetic Contour bevel head is designed to enable plasma and flame bevel cutting with the same bevel unit. Quick mount systems allow for quick cutting head changing between plasma and flame torches. This bevel is capable of piercing vertically, beveling to the programmed angle and beveling around the contour. 

Oxy Fuel Cutting Head Features:

  • Cutting Capacity: 8” Max Mild Steel
  • Gas Regulator Panel: Included
  • Servo Oxy Pressure Cutting: Included
  • Height Control: Programmable vertical control via re-circulating ballscrew
  • Presets: Programmed torch lower, preheat time, programmed raise prior to pierce, lower to cut height after pierce
  • Protection: Pneumatic breakaway torch protection and easy relocation
  • Guideway Protection : Full axis covers for guide-way and ballscrew protection
  • Supply: Gas hoses and electrical supply in Z and Y axis drag chain
  • Ignition:  Automatic 

CNC Controller

The Kinetic profiling machines use a PC based controller combined with a Glass-Faced LCD touch-screen for the operator interface.

Features:

  • PC based controller
  • 19” LCD glass faced touch screen
  • Separate 32 bit motion controller for uninterrupted motion control
  • Standard components for easy replacement of parts
  • Practically no limit to program size
  • Emergency stop pull wire on rear of machine (included option).
  • Comprehensive on board diagnostics
  • Context sensitive help
  • Air conditioning of cabinet to prolong electronic life (Included Option).

Protection Upgrade: 

This system includes the optional Kinetic “Full Machine Protection Upgrade”  

This option is for upgrading the machine to provide improved machine protection and to minimize machine wear and improve reliability. Included with this upgrade is the following:

• Category 3 Estop circuit and E stop wire lanyard around gantry

• Electrical isolation transformer for machine supply and power conditioning

• Four head lifter carriage to enable future upgrading of tooling

• Bellows on the gantry to protect the drive system and linear bearings from debris. Greatly

improving the life of these guides and drives

• Long axis cover belts, side protection of long axis, belt rollers and tensioners

• Increase beam width to fit four head carriage and to allow for all tools on this carriage to

process the largest width plate and extra width for fitting of bellows. Also allows for fitting of

second plasma with driven carriage

• Shielding of cables and hoses on the tool posts

• Air conditioner to machine electrical cabinet

• Precision pneumatic breakaways for plasma torches and oxy torches including the plasma bevel

Table

  • Table Type: Heavy Duty Downdraft Cutting Table w/Automatic Cleaning System
  • Capacity: 8” thick plates Max
  • Dust/Fume Collection: Travelling Sub Table Vent hood
  • Scrap Removal: Automated Floor Sweeper/scraper

Marking Systems: 

Pneumatic/Percussion Marking System

Description: This CNC micro percussion marking system has a sub axis that provides for a marking area of 100 x 100 mm. This marking system has the following specifications:

  • Marking area (x/y): 100 x 100 mm
  • Available heights of characters: 2,0 up to 99,9 mm

Inkjet Microdot Marking System: 

Description: 16 Nozzle Inkejet Marking System with 15MK to 65MM Character Height Printing Capability

INCLUDES: Kinetic PC Based CNC Controller, Hypertherm XPR300 Hi Definition Bevel Cutting Plasma Cutting System, Oxy-Fuel Cutting System, 20 HP 40 Taper Spindle, 24 Station Automatic Tool Magazine, Laser Pointer, Thru Spindle Cooling, Heavy Duty Self-Cleaning Downdraft Table, Chip Extraction, Dust Collector, Pneumatic & Inkjet Marking System.

***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***

Sold