14.6” X 10.6” X 10.2” Wire EDM with Fanuc 31i-WB CNC Control, Heidenhain Linear Glass Scales, (7) Controllable Axes (X, Y, U, V, Z, A & B), Absolute Position Encoder System for (X, Y, U, V, Z), 30° + Taper Cutting Capability, Wire Tension Controlled Via Twin Servo Motors, Anti Crash Protection (X, Y, U, V, Z), Full Function Hand Held Pendant Control, Automatic Water Level Control in Work Tank, (1) RS232C, (1) Ethernet Port, (2) USB Ports, (1) PMCIA Slot, Programmable Flushing, Stainless Submersible Vertical Wire Alignment Gauge, Chiller Unit and Wash Down Hose with Nozzle.

GENERAL SPECIFICATIONS 
X - Axis Travel:                    14.6”
Y - Axis Travel:                    10.6”
Z - Axis Travel:                    10.2”
UV Axes Travel:                    ±2.362”
Rapid Traverse:                    1~50
Work Piece Thickness @ Taper Angle:        ± 12 @ 10”
Manual Threading (Jet Nozzle Removed):    ±30 @ 3.26”
Wire Feed Rate:                    0 ~ 590 IPM
Wire Tension:                    200 ~ 2,500 g
Max. Wire Spool Weight:                35 Lbs
Wire Diameter:                    0.004 - 0.012”
Tank Capacity:                    145 Gal.
Total Power Requirement:                13KVA | 220/240V | 3 Phase | 60 Hz


INCLUDES: Fanuc 31i-WB CNC Control, Heidenhain Linear Glass Scales, (7) Controllable Axes (X, Y, U, V, Z, A & B), Absolute Position Encoder System for (X, Y, U, V, Z), 30° + Taper Cutting Capability, Wire Tension Controlled Via Twin Servo Motors, Anti Crash Protection (X, Y, U, V, Z), Full Function Hand Held Pendant Control, Automatic Water Level Control in Work Tank, (1) RS232C, (1) Ethernet Port, (2) USB Ports, (1) PMCIA Slot, Programmable Flushing, Stainless Submersible Vertical Wire Alignment Gauge, Chiller Unit and Wash Down Hose with Nozzle.

***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***