10’ X 48’ Plasma & Oxy Fuel Cutting System with Burny Phantom II PC Based CNC Control System, Burny High Performance AC Drive System, Floor Mounted Rail System with Two Safety Parking Zones, (2) Burny Kaliburn Spirit II 400 “Ultra Sharp” Mechanized Plasma Systems on Dual Kaliburn Inova Automatic Plasma Torch Height Controllers, (4) CSI Motorized Oxy Fuel Torch Cutting Stations, Water Table, Ingersoll-Rand Model 2340 5 HP Air Compressor, Includes Programming Station with Sigmanest Version 10 Software.

GENERAL SPECIFICATIONS

  • Effective Cutting Width: 10’
  • Effective Cutting Length: 48’
  • Cross Travel Drive System: Dual Linear Ways & Bearings
  • Longitudinal Travel Drive System: Precision Rack & Pinion
  • Carriages: Heavy Duty Master and Slave Carriages
  • Power Tracks: Individual Igus Power Track
  • Heat Shields: Full Width Heat Shields
  • Travel Speeds: 500 ipm
  • Positioning Resolution: 0.0001”
  • Remote: Remote Control Console
  • Lubrication: Programmable Auto Lube
  • Rail Cleaning System: (4) CSI Advanced Rail Cleaning Systems
  • Torch Spacing/Drive System: Stainless Steel Torch Band
  • Drive Track: 56’ Floor Mounted Rail System
  • Safety Zones: (2) Safety Parking Zones
  • Drive Type: Dual Side Drive Precision Rack & Pinion
  • Cabling Protection: Stainless Steel Braided Shield on all Interconnecting cables
  • Positioning Speeds: Speeds up to 500 ipm standard

Note: (Specifically designed for production cutting of (2) 10’ x 20’ plates)


CONTROLLER
  • Make: Burny
  • Model: Phantom II
  • Type: PC Base Control System including
  • Operating System: Windows XPE
  • Monitor: 15” Active TFT Color LCD Touch Screen

INCLUDES:
Programmable Rotation & Scaling, 2.26 GHz Intel Core 2 Duo Mobile Processor DXF/DWG File Conversion, 40 Gigabyte Hard Drive Capacity 8-Direction Jog Keypad, 2 Gigabyte DDR3 RAM Cut Loss Memory, (4) Front Panel USB Ports Graphic Automatic Plate Alignment, Software Upgrades via Internet Built in Diagnostics, “Go To” Job Interrupt True Multitasking Environment, Dynamic Repositioning & Cu/Loss Recovery Multi process functionality, Built in Plasma Tracking Consumable Graph Real time Path Display, Internet & Network Capabilities Feed Rate Potentiometer, Burny High Performance AC Drive System, Heavy Duty Industrial Enclosure for the harshest environments. Network Kit for Part Loading, Remote Help & Diagnostics, Enables Immediate Downloads from your office desktop PC, Enables “remote diagnostics” by CSI via your internet connection


PLASMA SOURCES
  • Number of Plasma Torches: 2
  • Make: Burny
  • Model: Kaliburn Spirit II 400 “Ultra Sharp”
  • Type: Hi Definition
  • Amperage: 400 Amp
  • Pierce Capability (MS): Pierce up to 2”
  • Cutting Capability (MS): 3” from an edge start
  • Gas Consoles: Configured with Automatic Gas Consoles
  • Torch Height Controller: Kaliburn Inova Automatic Plasma Torch Height Controls
  • Heavy Duty Motorized Slide with 9.2” of stroke, Initial Height Sensing (IHS), for accurate and repeatable Initial Pierce, Height Settings
  • Plasma Collision: Torch will “Breakaway” during accidental collisions in all axis

OXY/FUEL TORCHES

  • Number of OXY/FUEL Cutting Torches: (4)
  • Torch Make: Harris 98-6TARF
  • Torch Lifting Stations: (4) CSI Motorized Torch Cutting Stations
  • Type: Heavy Duty Motorized Lifter
  • Stroke: 8” of stroke
  • Power Track: Igus Power Track

TABLE

  • Type: Water Table
  • Effective Cutting Area: 10’ x 48’
  • Table/Tank Size: 10’6” W x 49’ L x 24” H
  • Bladder Type: Completely Welded Chamber
  • Water Level Control: Air Operated to Raise/Lower Water Level
  • Slat Spacing: 4” Centers
  • Slag removal: Removable Slag Pan

INCLUDES: Burny Phantom II PC Based CNC Control System, Burny High Performance AC Drive System, Floor Mounted Rail System with Two Safety Parking Zones, (2) Burny Kaliburn Spirit II 400 “Ultra Sharp” Mechanized Plasma Systems on Dual Kaliburn Inova Automatic Plasma Torch Height Controllers, (4) CSI Motorized Oxy Fuel Torch Cutting Stations, Water Table, Ingersoll-Rand Model 2340 5 HP Air Compressor, Includes Programming Station with Sigmanest Version 10 Software.

***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
Sold