10mm (.39") Diameter Bending Capacity 3D CNC Wire Bender with, Operator Interface Windows Based Touchscreen Control, 360 Degree Turret, Rockford Powered Uncoiler, Straightener and Feed Roll Material Infeed System.
GENERAL SPECIFICATIONS
- Bends Wire Up to: 10MM
- Turret: Rotates the Bending Axis 360°
- Control: Touchscreen CNC Operator Controls - Windows Based
- Voltage: 230/460 Volt, 60HZ, 3 Phase Electrics
INCLUDES: Operator Interface Windows Based Touchscreen Control, 360 Degree Turret, Rockford Powered Uncoiler, Straightener and Feed Roll Material Infeed System.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
%202007%20Mang%206S-10%20Wire%20Bender%20-%20Pic%201.jpg "(3369) 2007 Mang 6S-10 Wire Bender - Pic 1")
%202007%20Mang%206S-10%20Wire%20Bender%20-%20Pic%202.jpg "(3369) 2007 Mang 6S-10 Wire Bender - Pic 2")
%202007%20Mang%206S-10%20Wire%20Bender%20-%20Pic%203.jpg "(3369) 2007 Mang 6S-10 Wire Bender - Pic 3")
%202007%20Mang%206S-10%20Wire%20Bender%20-%20Pic%204.jpg "(3369) 2007 Mang 6S-10 Wire Bender - Pic 4")
%202007%20Mang%206S-10%20Wire%20Bender%20-%20Pic%205.jpg "(3369) 2007 Mang 6S-10 Wire Bender - Pic 5")
%202007%20Mang%206S-10%20Wire%20Bender%20-%20Pic%206.jpg "(3369) 2007 Mang 6S-10 Wire Bender - Pic 6")
%202007%20Mang%206S-10%20Wire%20Bender%20-%20Pic%207.jpg "(3369) 2007 Mang 6S-10 Wire Bender - Pic 7")
