40” X 6” Beam Capacity with 40’ of Infeed and Outfeed Conveyors, 1-9/16” Drilling Capacity, Franklin Multi- Axis Control, 3 12 HP Spindles, Programming and Operating PC’s Included.

GENERAL SPECIFICATIONS

• Maximum Beam weight per foot 300 lbs
• Maximum Beam Depth     40”
• Minimum Beam depth 6”
• Beam feed rate in X-Axis (maximum): 100 FPM
• Rapid Advance (Web): 420 IPM
• Rapid Advance (Flanges): 420 IPM
• Retract speed (Web and Flanges): 420 IPM
• Spindle motors (AC Variable): 10 HP
• Motor capacities (Hydraulic): 3 @ 12 HP
• Drill feed rates (CNC controlled): 0-30” IPM
• Drill speeds: 0-1,800 RPM
• Drill capacity (Web): 1-9/16” (#4 Morse)
• Drill capacity (Flanges): 1-9/16” (#4 Morse)
• Cross Feed Conveyor length      18’ to back of conveyor
• Infeed Conveyor length     40’
• Outfeed Conveyor Length     40’
• Conveyor height     30”

FRANKLIN MULTI-AXIS CNC CONTROL SYSTEM

The Control System consists of two components: Personal Computer (PC), Programmable Industrial Controller (PIC). These two components combined provide a highly reliable operating system, where each of the components performs its designed functions effectively.

• - 80 GB Hard drive - Microprocessor Pentium DC 2 GHz
• - 1 Parallel Port - 2 GB Ram Memory
• - 1 Serial Port - 14” Color Monitor
• - Interface Keyboard
• - The PC system is mounted in the operator panel along with the required system controls.
• - The computer system will meet or exceed the requirements for proper machine functions.
• The PC portion of the control package will perform a variety of functions based on the machine requirements.

• Create and edit part programs.
• Optimize parts into stock programs.
• Display graphical representation of part program.
• Mirror image of part program.
• Run single part program.
• Run single stock program.
• Run multiple stock Programs.
• Run from last operation after abort.
• Section table of material forms.
• Diagnostics software (status of PLC variables and contacts).
• Record part count and run time.
•  Machine setup and machine parameters.

PROGRAMMABLE INDUSTRIAL CONTROLLER SYSTEM:

The PIC is a multi-axis integrated solution to the discrete logic & motion controller. The PIC will have exclusive control of all axis movement and processes. This is done through feedback of servo systems and hardwired inputs and outputs.

• The PIC is highlighted by some exclusive features such as:
• - 32 bit processor - Fast download
• - Acceleration and deceleration ramping - Full handshaking on the serial port
• - Modem compatible - Nonvolatile memory
• - Enclosed module packaging - Expandable memory
• - Serial communication

The PC portion of the control package will perform a variety of  functions based on the machine requirements.

• Create and edit part programs.
• Optimize parts into stock programs.
• Display graphical representation of part program.
• Mirror image of part program.
• Run single part program.
• Run single stock program.
• Run multiple stock programs.
• Run from last operation after abort.
• Section table of material forms.
• Diagnostics software (status of PLC variables and contacts).
• Record part count and run time.
• Machine setup and machine parameters.

EQUIPPED WITH

• Thru Spindle Coolant - 20 Gallon High Capacity Coolant System for high pressure mist coolant through the bit.  Including tank and related components including:
• Rotating coupling
• Mixing valve systems for variable coolant air distribution
• 20 HP HYDRAULIC POWER UNIT
• DUAL AXIS PINCH ROLL DRIVE for infeed and outfeed measuring.
• Maximum X axis speed………………………………….. 130 FPM
• Infeed hydraulic pinch roll drive for measuring and driving the leading section of material.
• Pressure switch material detection for side clamp to automatically find the width.  
• Vertical holddown rolls on both sides.
• Precision measuring wheel for overall X axis length and hole location.  
• X Axis length accuracy………………………………….. +/- .030
• AC servo drive system synchronized with infeed/outfeed conveyors.
• Outfeed pinch roll drive system for measuring and driving the trailing end of  material complete with all above features.
• Pinch roll clamps are self adjusting to individual section sizes automatically.
• *Manufactured: 1989, rebuilt 2006