Two Independent Working Cylinders, One for the Punch and One for the Shear, Miter Cuts Angles on 45° Leg-In, Easy to Adjust Length of Stroke, Adjustable Swing Away Stripper, Round and Square Bar Blades 3″ and 4″ Channel Shear Blades, Plate Shear Support Table w/ Miter Guides, Safety Lock-Out for the Coper/Notcher Station.
GENERAL SPECIFICATIONS
- Plate Shear: 12″ x 5/8″
- Angle Shear: 4″ x 4″ x 1/2″
- Punch: 60 Tons, 1-1/2″ x 3/8″, 3/4″ x 3/4″
- Round and Square Bar: 1-9/16″
- 90 Degree Notch: 3/8″
INCLUDES: Two Independent Working Cylinders, One for the Punch and One for the Shear, Miter Cuts Angles on 45° Leg-In, Easy to Adjust Length of Stroke, Adjustable Swing Away Stripper, Round and Square Bar Blades 3″ and 4″ Channel Shear Blades, Plate Shear Support Table w/ Miter Guides, Safety Lock-Out for the Coper/Notcher Station.
***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
%202004%20GEKA%20Hydracrop%2055-A%20Ironworker%20-%20Pic%204.jpeg "(3475) 2004 GEKA Hydracrop 55-A Ironworker - Pic 4")
%202004%20GEKA%20Hydracrop%2055-A%20Ironworker%20-%20Pic%203.jpeg "(3475) 2004 GEKA Hydracrop 55-A Ironworker - Pic 3")
%202004%20GEKA%20Hydracrop%2055-A%20Ironworker%20-%20Pic%202.jpeg "(3475) 2004 GEKA Hydracrop 55-A Ironworker - Pic 2")
%202004%20GEKA%20Hydracrop%2055-A%20Ironworker%20-%20Pic%201%20-%20Edited.jpg "(3475) 2004 GEKA Hydracrop 55-A Ironworker - Pic 1 - Edited")
