16" X 16" Capacity Horizontal Bandsaw with 7.5 Hp With Motor To Pulley To Gearbox Blade Drive. Blade Tensioning Via 2 Hp Hydraulic Motor And Flood Coolant With 10.5 Gallon Tank Capacity. Max Weight Load 5,511 Lbs. Including Length Set With Hand Wheel & Readout, Amp Meter, 4 Vertical Rollers, Wash Down Hose, Blade Break Switch, Out Of Stock Switch, Out Of Stock Switch, Piece Counter, Powered Screw Type Chip Auger, Fast Approach Of Blade To Cut Area, Powered Chip Brush, Positive Hydraulic Down Feed and Automatic/Manual Mode.

GENERAL SPECIFICATIONS:

  • Maximum Cutting Capacity: 90 Deg, Round: 16"
  • Maximum Cutting Capacity: 90 Deg, Square: 16" X 16"
  • Blade Dimensions: 15' X 1-1/2" X .050"
  • Blade Guides: Carbide
  • Guide Arm (Manual / Powered): Manual
  • Blade Speeds: 50 - 295 Fpm
  • Number Of Speeds: Infinite
  • Blade Motor: 7.5 H.P.
  • Blade Drive Type: Motor To Pulley To Gearbox
  • Blade Tension Type: Hydraulic
  • Hydraulic Motor: 2 H.P.
  • Hydraulic Tank Capacity: 31.5 Gallons
  • Coolant Motor: 1/4 H.P.
  • Coolant Type: Flood
  • Coolant Tank Capacity: 10.5 Gallons
  • Maximum Feed Length: 19.6"
  • Number Of Multi Indexes: 9x
  • Table Height: 31.5"
  • Maximum Weight Load: 5,511 Lbs.
  • Vise Type: Hydraulic
  • Remnant Length: 3"
  • Voltage: 440 Volt 3 Phase
  • Dimensions: 90" X 106" X 63"
  • Weight: 4,850 Lbs.


INCLUDES: Mechanical Length Readout, Amp Meter, 4 Vertical Rollers, Wash Down Hose, Blade Break Switch, Out Of Stock Switch, Piece Counter, Powered Screw Type Chip Auger, Fast Approach Of Blade To Cut Area, Powered Chip Brush, Positive Hydraulic Down Feed, Manual/ Automatic Mode.


***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
Sold