Stamping, Punch & Forming Presses

Filter:
Sort:
Year
Price
Capacity
1995 Aida NC-200 Gap Frame Press (#4972)

1995 Aida NC-200 Gap Frame Press (#4972)

220 Ton Gap Frame Press with Panel - Mate Pedestal Control, Air Clutch, Air Brake, Air Counterbalances, Hydraulic Overloads, T - Slotted Ram and Bolster, Vibration Pads, Powered Ram Adjustments and a 20 HP Main Motor.

1983 Bliss SC2-200-72-48 Press (#4869)

1983 Bliss SC2-200-72-48 Press (#4869)

200 Ton Press with Palm Button Controls, Air Clutch, Air Brake, Air Counterbalance, Helm Series 4 Load Guard and Floor Standing

Standard Industrial DC300 C - Frame Press (#4847)

Standard Industrial DC300 C - Frame Press (#4847)

300 Ton Press with Two Hand Controls, Hydraulic Tonnage Control, Full Tonnage Throughout Stroke, Counterbalance Valve For Punching and Magnetic Starter with Over & Under Voltage Protection with Disconnect Switch.

Herr Voss RH84/1.156-19/1634HI Leveler (#4801)

Herr Voss RH84/1.156-19/1634HI Leveler (#4801)

72” X 84” X .60” Leveler with 4 High Roll Arrangement.

Minster P2-150-54 Straight Side Press (#4613)

Minster P2-150-54 Straight Side Press (#4613)

150 Ton Piece-Maker Geared Straight Side Press with Motor / Electrics / Controls, T-Slotted Bolster, T-Slotted Slide, Air Clutch and Brake

1990 Bliss C-60 Open Back Inclinable Punch Press (#4601)

1990 Bliss C-60 Open Back Inclinable Punch Press (#4601)

60 Ton Punch Press with Dual Palm Button Control, Black Max Light Curtains, Vibrashock Isolation Pads, Inch / Single / Continuous Modes, Air Clutch and Brake.

1998 Minster Model #7 Flywheel Type OBI Punch Press (#4600)

1998 Minster Model #7 Flywheel Type OBI Punch Press (#4600)

75 Ton OBI Punch Press with Dual Palm Button Operation, 4” Stroke, Variable Speed, Wintriss DiPRO 1500 Die Protection System, Automatic Lubrication System and Air Clutch and Brake with Selector Control

2003 Komatsu H4F-600 Press (#4564)

2003 Komatsu H4F-600 Press (#4564)

660 Ton Servo Press with Servo Drive and Komatsu Transfer System

2009 Komatsu H2W200 Press (#4559)

2009 Komatsu H2W200 Press (#4559)

220 Ton Servo Press, 9.94" Stroke, 4.72” Adj. 50 SPM and Flush Floor

AIDA G1-11 Punch Press (#4558)

AIDA G1-11 Punch Press (#4558)

121 Ton Gap Press with Wintress Smart PAC Controls, 4.3" Stroke, Air Clutch & Brake and Air Counter Balances

1982 Niagara S2G-200-60-30 Gap Frame Press (#4539)

1982 Niagara S2G-200-60-30 Gap Frame Press (#4539)

200 Ton Double Crank Gap Frame Press with Palm Buttons, Air Clutch & Brake, Air Counterbalance, Floor Standing, T-Slotted Ram and Bolster

Niagara S2-220-60-36 Punch Press (#4535)

Niagara S2-220-60-36 Punch Press (#4535)

220 Ton Punch Press with 36" X 60" Bed, 12" Stroke, 23" Shut Height, T-Slotted Ram and Bolster

Bliss C2-150 Gap Frame Punch Press (#4522)

Bliss C2-150 Gap Frame Punch Press (#4522)

150 Ton Bliss 2-Point Gap Frame Press with 72" X 30" Bed, 8" Stroke, 25-50 SPM, Dual Palm Buttons, Air Counter Balance, Air Clutch, Link Light Curtains, Link Tonnage Monitor, Flush Floor No Pit Required, T Slots In Bolster and Ram

1995 Komatsu OBS-150-3 Punch Press (#4512)

1995 Komatsu OBS-150-3 Punch Press (#4512)

165 Ton Komatsu Gap Frame Press with 9.85" Stroke, 18.7” Shut Height, 27.56" X 21.65" T-Slotted Ram, 49.21" X 31.5" Bed, 27-55 SPM, Air Clutch, Air Counter Balance Cylinder, Hydraulic Overloads and Dual Palm Buttons

1994 Minster G1-150 Back Geared Punch Press (#4511)

1994 Minster G1-150 Back Geared Punch Press (#4511)

150 Ton Minster Rigid Gap Frame Punch Press with Air Clutch and Brake, 10" Stroke, 26.25" Shut Height, 50" X 30" Bed, Air Counterbalances and T-Slotted Ram

Bliss C-150 RGF Punch Press  (#4510)

Bliss C-150 RGF Punch Press  (#4510)

150 Ton Rigid Gap Frame Punch Press with Ceico Controls, Dual Palm Buttons, 10” Stroke, 50" X 30" Bed, 20" Shut Height, Air Clutch and Brake, 20-40 SPM, Air Counterbalances and Cushion

Bliss C-45 Punch Press (#4455)

Bliss C-45 Punch Press (#4455)

45 Ton C-45 Flywheel Type OBI Press with 3" Stroke, 12.5" SH, V/S Drive 40-120 SPM, Air Clutch and Single Crank

1992 Bliss C-110 B/G Punch Press (#4369)

1992 Bliss C-110 B/G Punch Press (#4369)

110 Ton Single Point Back-Geared OBI Punch Press with 28" x 21" T Slotted Flanged Ram Size, 42" x 27" T Slotted Bed Size, 8" Stroke, Power Ram Adjustment 20-40 SPM Variable Speed Drive, 17 Shut Height, Combination Air Clutch & Air Brake, Air Counterbalances and T-Stand Dual Palm Buttons

1976 Bliss C-45 OBI Punch Press (#4335)

1976 Bliss C-45 OBI Punch Press (#4335)

Bliss 45 Ton OBI Punch Press with 15” X 9” Ram Size, 29” X 18” Bed Size, 3" Stroke, 13-1/4" Shut Height, Air Clutch & Brake, Air Counterbalances and Dual Palm Buttons

1986 Bliss C-35 Flywheel Type OBI Punch Press (#3993)

1986 Bliss C-35 Flywheel Type OBI Punch Press (#3993)

35 Ton X 3” Flywheel Type OBI Punch Press with Air Clutch, Air Brake, 2” Bolster Drilled and Tapped and Palm Buttons
Minster P2-45-32 Piecemaker Punch Press (#3967)

Minster P2-45-32 Piecemaker Punch Press (#3967)

45 Ton Piecemaker 25” X 32” Bolster Area ½” Stroke, 10-¾” Shut Height.
Minster P2-30-36 Punch Press (#3966)

Minster P2-30-36 Punch Press (#3966)

30 Ton Piecemaker 34” X 19” Bolster Area 2” Stroke, 2” Slide Adjustment, 11-½” Shut Height.
1975 Minster E2-300 SSDS Punch Press (#3905)

1975 Minster E2-300 SSDS Punch Press (#3905)

300 Ton Straight Sided Double Crank Heavy Duty Stamping Press,
72” X 42” X 6” Bolster, 0-60 SPM Pressing Speed, 6” Ram Adjustment, 10” Stroke Length, Air Clutch & Brake, Air Counterbalance, Vibration Pads, in a Floor Standing Machine.
1974 Minster E2-300 SSDC Punch Press (#3891)

1974 Minster E2-300 SSDC Punch Press (#3891)

300 Ton Straight Sided Double Crank Heavy Duty Stamping Press with the Omnilink LCD Operator Terminal, 60” X 48” X 6” Bolster, 24” Windows, 0-80 SPM Pressing Speed, 6” Ram Adjustment, 8” Stroke Length, Air Clutch & Brake, Air Counterbalance, Dual P/B, T-Slotted Ram & Bolster, Lite Curtains, Vibration Pads, in a Floor Standing Machine
1974 Minster E2-300 Straight Side, Double Crank Press (#3889)

1974 Minster E2-300 Straight Side, Double Crank Press (#3889)

300 Ton Straight Sided Double Crank Heavy Duty Stamping Press with Bolster Size: 72” X 48” X 6” Thick,30-60 SPM 6” Ram Adjustment, Length of Stroke: 10”, Floor Standing.
1966 Minster E2 - 200 Straight Side Production Press (#3862)

1966 Minster E2 - 200 Straight Side Production Press (#3862)

200 Ton Straight Side Press with 30” X 30” Bed Size, 6’ Stroke & 19” Shut Height

1990 Bliss C-60 Punch Press (#3523)

1990 Bliss C-60 Punch Press (#3523)

60 Ton Flywheel Type OBI Press with Single Crank, Air Clutch.

1994 Minister E2-300 Double Crank Stamping Press (#3481)

1994 Minister E2-300 Double Crank Stamping Press (#3481)

300 Ton Straight Sided Double Crank Heavy Duty Stamping Press with Bolster Size: 84" L-R x 48" F-B x 6" Thick, Shut Height on Bolster S.D.A.U.: 30, 6” Ram Adjustment, Length of Stroke: 12".

2000 Stamtec S2-300 SSDC Press (#3117)

2000 Stamtec S2-300 SSDC Press (#3117)

330 Ton X 8’ Straight Side Double Crank Press with Slide Guided by Eight Full-Length, Ninety-Degree Gibs with Nickel-Bronze Wear Plates, Offering Maximum Control, a High Degree of Accuracy and Ease of Adjustment.

Stay Up-To-Date on New Listings