62” X 157” Router with CNC Controls, Remote Access, Data Transfer over Remote Network Connection, Dust Extractor, Automatic Tool Length Measurement and Metal Fence on 3 - Sides
6’ X 12’ Edgebander with Vector Revolution Operating System, Quick Change Vacuum Pod, Cartridge Glue System and SideWinder System Enabling One Pass & Trimming.
5’ X 10’ CNC Router with Fagor 8037 Control, Spinning Ball Nut & Recirculating Ballscrew Drive, 10 Tool Tool Changer Rack, Vacuum Table with Pump and Dust Collection Hood
8’ X 14’4” CNC Stone Cutting Machine with Quantum Belt Driven Spindle, Laser Positioning, Helical Rack and Pinion Drive, HMI Station is Connected Directly to Machine, 36 Tool Pockets and Removable Water Containment Panels.
60” X 50” CNC Router with Auto Tool Changer, Pop-Up Reference Pins and Vacuum Hold Down System.
350” X 43” CNC Router with Omega 200 Touchscreen with FOM CAM 3D and Geometrics, 12 Position Toolchanger, (8) Pneumatic Vises and Pendular Machining.
3’ X 5’ Woodworking Router with Mach 3CNC Control with Laptop PC with Vectric Software, Horizontal and Vertical Workstations, Dust Collector with Sweep Head, Turning Workstation, Water Cooled Spindle, Manual Tool Changer and Auto Height Checker.
4’ X 8’ CNC Router with MultiTool Easy Control, AC Servo System, HSD 5.5 HP Spindle, Automatic Linear Tool Changer, 7 HP 2-Stage Vacuum Pump w/ Regenerative Blower, Multivision Pro Camera System and Laser Pointer.
5’ X 10’ Router with Multicam CNC EZ Controller, 6 Position Linear Tool Changer, 5 HP Vacuum Pump, T - Slotted Table and Step Motor.
4’ X 8’ CNC Router with 2.2 HP Spindle, Closed Loop alphaStep Motors on All Three Axes, Precision Linear Bearings on Moving Gantry, Rack & Pinion Power Transmission and Emergency Stop & Disconnect Switch.
47.25” X 32” X 10” Sink Hole Machine with Fagor 8070 Numerical Control, ISO 40 Tool-Holder Spindle, In - Feed and Out - Feed Rollers.
8’ X 18’ CNC Router with A2MC Control, Auto Gantry Squaring and (3) ELTE Spindles
60” X 120” CNC Router with Multitool Control, Easy Control, AC Servo System, Umbra Spindle, HSK 63 Pneumatic Chuck, Heat Exchanger for Liquid Cooled Spindles, Linear Tool Changer and 4 - Zone Pneumatic Valves with Switches on Console.
4’ X 8’ CNC Router with SAI Open CNC Control, HSK63 Spindle, Air Blast, Auto Unload, Vacuum Pump, Auto Grease lubrication System and Bottom Dust Extraction at Front Edge of Table.
6' X 12' CNC Router with Multicam CNC Controller 5 Horsepower Colombo Router Head, Vacuum Table w/ 25 HorsePower Baldor Blower.