9” X 49” Capacity Vertical Milling Machine with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Meehanite Casting, Chromed Ways, elf-Lubricating Motor Shaft, Abec-7 Super Precision Spindle Bearings, Digital Variable Speed, 3- Axis Digital Readout (quill, saddle and table), X –axis Power Feed, Hard-Chromed Ways, Front & Rear Rubber Way Cover, & One Shot Lube System.
STANDARD EQUIPMENT:
FEATURES:
GENERAL SPECIFICATIONS:
FEATURES, FUNCTION, & BENEFITS:
ISO 9002 certified: Quality up to world industry standards.
Meehanite casting: Highest grade of casting possible.
A pair of precision ABEC-7 angular contact bearings to support spindle.
The quill is ground and chromed to fit the housing: This insures a spindle run out of 0.0002” T.I.R.
Motor shaft and VariDrive pulleys are dynamically balanced, then chromed for a flawless fit, ground ribs on inside diameter: For smooth speed changes.
Motor shaft has an oil channel in the center that is fed by grease fitting on the lower end: To keep VariDrive pulley moving smoothly on the shaft.
This LMV mill uses a roller bearing for the lower support of the shaft: It ensures proper loading, support and alignment. It also prevents the shaft from being distorted by the tension of the belt: For quiet, accurate operation at any speed for years and years.
One shot lubrication system: For lubrication of ways and lead screws. (X, Y and Z-axis)
Hand scraped saddle and knee: For better oil retention. It avoids having chips and dirt embed in the knee and damage the sliding surface.
Oil groove are milled: For maximum lubrication on all wear areas.
Table and saddle backlash is controlled by double nut design: Keeps lead screw in contact with bronze nuts all times to keep backlash at .0008” within 20”.
Table and saddle are mounted with thrust bearings that are preloaded: Eliminating endplay for precisely controlled lateral movement.
Ways are hard chromed dovetail on saddle and column.
***All Price, Location and Specifications Subject to Change without Notice***