The BLM LT14 LASERTUBE is an innovative powerhouse in large capacity cutting. This is the equipment for 3D laser cutting of large diameter tubes and structural beams in steel, aluminum or brass. The LT14 is the right technology for H and IPE laser cutting, but also for the production of sections for agricultural and industrial vehicles. The BLM LT14 LASERTUBE can also be combined with a full automatic drill and tapping unit for threading holes up to M16 (.625”) eliminating the need to separate tapping operations.
FEATURES:
Key Technical Specifications:
Round tubes: min. 25 mm (1”), max. 355 mm (14”)
Square tubes: min. 25 x 25 mm (1” x 1”), max. 260 x 260 mm (10” x 10”)
Rectangular tubes: min. 25 x 25 mm (1” x 1”), max. 300 x 200 mm (12” x 8”)
Open Profiles: min. 80 x 80 mm (3.2” x 3.2”), max. 260 x 260 mm (10” x 10”)
Cutting thickness: 16 mm (0.625”)
Loadable bar length: max. 15 m (50 ft)
Unloading length: (m) max. 15 m (50 ft)
Short Part Loading: Up to 3.2 m (10’)
Laser source power (kW) 3.5 CO2 (higher powers on request)