Waterjets

ProNest
SFMS is proud to partner with Hypertherm on a programming solution for all our flat sheet cutting systems including Lasers, Waterjets, Plasma and Oxy-Fuel.
Filter:
Sort:
Year
Price
Capacity
2007 Techni Intec 612 Waterjet (#4248)

2007 Techni Intec 612 Waterjet (#4248)

6' X 12' Waterjet with Techni PC-Based Computer, Quantum ESP-55 Electro-Servo Intensifier Pump, Chiller, (2) Cutting Heads (One Currently Installed) and Owner's Manual
2013 Flow Mach II 2031B Waterjet (#4235)

2013 Flow Mach II 2031B Waterjet (#4235)

6’ X 10’ Table, with a Servo Z Programmable Axis, Abrasive Hopper with 4.5 C.F. Windows based CNC Control with 17” CRT, 30 HP Pump and 60,000 PSI Cutting Pressure. Equipped with FlowMaster Programming Software, Paser ECL Cutting Head, and Assorted Parts.


2016 Hydrapower WJ1515 Waterjet (#4216)

2016 Hydrapower WJ1515 Waterjet (#4216)

 4' X 4' CNC Abrasive Waterjet Cutting System with P.C. Controller, 40,000 PSI, 40H.P Abrasive Hopper  4' X 4' CNC Abrasive Waterjet Cutting System with P.C. Controller, 40,000 PSI, 40H.P Abrasive Hopper.

2013 Omax 80X Waterjet Cutting System (#4213)

2013 Omax 80X Waterjet Cutting System (#4213)

80" X 240" Waterjet Cutting System with (2) Enduromax 50 HP Pumps, Intelli - Visor For Additional Pump, Tilt-A-Jet, Closed Loop System w/ 2400BTU/HRR Chiller and Aminar Filter, Dual Pump, Intelli - Visor FSP (Full Sensor Package), (2) Koolant Koolers Chillers, 3 - Axis w/ Compensating Heads, 9° Max, De-Ionizer Water System, Settling Tank, Variable Speed Solids Removal System For Box 1 w/ Hoppers, Bulk HopperFor Abrasive 2,000 LB Spares and Collision Sensing Terrain Follower
2018 Flow Mach 200 4020 Waterjet Cutting System (#4201)

2018 Flow Mach 200 4020 Waterjet Cutting System (#4201)

6’ X 13’ CNC Waterjet with Flow Expert Control, Pivot + 5-Axis Head, 900 LBS Abrasive Hopper, 30 HP Pump, 60K PSI Cutting Pressure, Automatic Taper Compensation, Automatic Part Time Estimation, Collision Detection and 8” Programmable Z-Axis Servo Driven.
2006 Calypso HammerHead Waterjet Cutting System (#4172)

2006 Calypso HammerHead Waterjet Cutting System (#4172)

12’ X 6’ Waterjet Cutting System with Dual Servo Controlled Motors Used to Drive the Bridge, Calypso PC Based Controller, 60 HP 60K PSI KMT Intensifier Pump, Chiller, Remote Pendant & Abrasive Hopper
2013 Omax 80160 Waterjet Cutting System (#4143)

2013 Omax 80160 Waterjet Cutting System (#4143)

80” X 168” Waterjet Cutting System with Omax PC-Based Control, Enduromax 40 HP 55 PSI Pump, Water Level Adjustment, Hopper, 6,277 Hours on Pump.
2004 Flow IFB 6012 Waterjet Cutting System (#4140)

2004 Flow IFB 6012 Waterjet Cutting System (#4140)

6-½’ X 13’ Waterjet Cutting System with Flow PC Based Controls, 50 HP Pump 60K PSI Intensifier Pump and Chiller.
2019 Omax 80X Waterjet Cutting System (#4138)

2019 Omax 80X Waterjet Cutting System (#4138)

165” X 80” Waterjet Cutting System with PTO Control, EnduroMax P5060V Pump, 600 LB Abrasive Hopper, Air and Water Conditioning Kit, Motorized Z - Axis, 3 Ton Chiller 36,000 BTU, Pull - To - Open Valve Single Nozzle
1996 Omax 55100 Waterjet Cutting System (#4075)

1996 Omax 55100 Waterjet Cutting System (#4075)

55” X 100” Travel Waterjet Cutting System with Omax PC Based Computer, 600 LB Bulk Abrasive hopper, Omax 30 Hp 50,000 PSI Direct-Drive Pump.
2006 Flow IFB-6012 Waterjet Cutting System (#4067)

2006 Flow IFB-6012 Waterjet Cutting System (#4067)

6’ X 12’ Waterjet Cutting System with Flow Control, 50 HP, 60K PSI, Dynamic Cutting and a 600 LBS Hopper
2009 Flow International Mach 4 5 - Axis CNC Integrated Flying Bridge Water Jet (#4058)

2009 Flow International Mach 4 5 - Axis CNC Integrated Flying Bridge Water Jet (#4058)

8’ X 15’ CNC Waterjet with Flowmaster Windows Based Control, Integrated Flying Bridge, Dynamic XD Waterjet - Dynamic 3D Waterjet, Hypertension Technology, 50 HP Hyperjet 87,000 PSI Intensifier Pump Flow International 9’ X 16’ Table and 5 - Axis Motion Head.

2007 Flow I-6012 IFB Waterjet Cutting System (#3974)

2007 Flow I-6012 IFB Waterjet Cutting System (#3974)

6’ X 12’ Waterjet Cutting System with Flowmaster PC - Based Controller With Dynamic Waterjet, 100 HP, 87KPSI, Dynamic Cutting.
2012 Omax 80160 Waterjet Machining Center (#3971)

2012 Omax 80160 Waterjet Machining Center (#3971)

6’ X 12’ Capacity 5 - Axis Waterjet Cutting System with PC-Based Omax CNC Controller 40 HP 60 KPSI Variable Speed High Pressure Pump, Programmable Z - Axis, 600 Lb Abrasive Hopper
2007 Flow IFB 6012 Dynamic Waterjet Cutting System (#3955)

2007 Flow IFB 6012 Dynamic Waterjet Cutting System (#3955)

6’ X 12’ Dynamic Waterjet Cutting System with Flow PC Based Flowmaster Software, Dynamic Tapering Cutting Head, 50 HP 60,000 PSI Intensifier Pump, 500 LB Abrasive Hopper Capacity and Ebbco Abrasive Removal System.
Calypso HammerHead 126 Waterjet Cutting System (#3954)

Calypso HammerHead 126 Waterjet Cutting System (#3954)

12’ X 6’ Waterjet with Dual Servo - Controlled Motors Used to Drive the Bridge, CIP60 Pump, Real Time Motor Position Data, Automatic Tool Lift, NC Console Control, Mk4 Waterjet Control System with Windows 10, Hennco PrecisionCore 1200D Cutting Head, Built in Job Cost Calculator and Factory Refurbished in 2020.
2011 Flow Mach 3B 4020 Waterjet Cutting System (#3936)

2011 Flow Mach 3B 4020 Waterjet Cutting System (#3936)

13’ X 6’6” CNC Abrasive Waterjet Cutting System with Windows Based Flowmaster Intelligent Control, 60K PSI Intensifier Pump, Dynamic Head 500 LBS Abrasive Hopper.
2005 Calypso Hammerhead Stone Center Waterjet Cutting System (#3922)

2005 Calypso Hammerhead Stone Center Waterjet Cutting System (#3922)

130” X 78” Bridge Gantry X - Y Table on Frame, Servo Z - Axis, 30 HP Intensifier Pump with 60,000 PSI, Brushless Servo Motors and Digital Abrasive Control (DAC).
2015 Flow Mach 2 1313b CNC Waterjet Cutting System (#3898)

2015 Flow Mach 2 1313b CNC Waterjet Cutting System (#3898)

4’ X 4’ X 7” Waterjet Cutting System with Flow PC - Based Control w/ Flowpath, Flowcut and Flownest, Flow 0SA - 60, 30 HP, 60,000 PSI Intensifier Pump, Mini Hopper and just 580 Hours.
2010 Techni ESP 55 Waterjet Pump (#3743)

2010 Techni ESP 55 Waterjet Pump (#3743)

55KPSI Servo Electric Waterjet Pump with 55,000 PSI Pump Output, and 13,000 Approximate Hours.
2010 Flow IFB 6x12 Waterjet Cutting System (#3722)

2010 Flow IFB 6x12 Waterjet Cutting System (#3722)

6’ X 12’ CNC Abrasive Waterjet Cutting System with FlowMaster PC Controller & FlowMaster Software, 50HP Direct Drive Pump & Abrasive Hopper.

NEW IWM WPC0403A5 Water Jet Pipe Cutting Machine (#3705)

NEW IWM WPC0403A5 Water Jet Pipe Cutting Machine (#3705)

20” X 240” Watejet Pipe Cutting System with 4-Axis CNC Control (Rotation of Pipe, Feeding Pipe, Cutting Head Goes Up/Down, and Cutting Head Goes Left/Right.), Pipe Diameters up to 17", Wall Thickness up to 3", Pump Max Pressure 60,000 PSI, Can Cut Holes in the Pipe Wall as Well as Cut Off the Pipe, It is Possible to Manually Set a Tilting Angle of the Cut Head so that the Pipe Would Have a Bevel Cutting Edge.

VacBox 4400 Waterjet Garnet Removal System (#3677)

VacBox 4400 Waterjet Garnet Removal System (#3677)

4,000 LBS Waterjet Garnet Removal System with Sandpiper HDF2 Diaphragm Pump, 10 Channel Radial Diffuser, Garnet Suction/Discharge Nozzle Assembly, Double Acting Hydraulic Hand Pump, Dual Garnet & Fine Silt Removal Modes, 2 Fixed and 2 Swivel (1,500 LBS.) Castors for Easy Mobility. 

Xtractor XR1500SHD Garnet Removal System (#3682)

Xtractor XR1500SHD Garnet Removal System (#3682)

3000 LBS Waterjet Garnet Removal System with Sandpiper HDF2 Diaphragm Pump, HP65 Hydraulic Hand Pump, Cross-Flow Separator w/ Sealed Holding Chamber and Bottom Dump Door, Powder Coated with Cardinal Powder.

Xtractor XR2500HD Waterjet Garnet Removal System (#3681)

Xtractor XR2500HD Waterjet Garnet Removal System (#3681)

3000 LBS Waterjet Garnet Removal System with Sandpiper HDFI Diaphragm Pump, HP65 Hydraulic Hand Pump, Cross-Flow Separator w/ Sealed Holding Chamber and Bottom Dump Door, Powder Coated with Cardinal Powder.

Xtractor Waterjet Garnet Box HD (#3679)

Xtractor Waterjet Garnet Box HD (#3679)

Waterjet Garnet Box with Sandpiper HDF1 Diaphragm Pump, Patented 4” Cross-Flow Separator, 38 PPM Garnet Removal Rate, HP65 Hydraulic Hand Pump.

NEW IWM WC5WA1313H Waterjet Cutting System (#3658)

NEW IWM WC5WA1313H Waterjet Cutting System (#3658)

4' X 4' CNC Abrasive Waterjet Cutting System with P.C Controller, 60,000 PSI, Abrasive Hopper.

2008 Mitsubishi Suprema Waterjet Cutting System (#3645)

2008 Mitsubishi Suprema Waterjet Cutting System (#3645)

5’ X 10’ Abrasive Waterjet Cutting System with Mitsubishi CNC Graphic Controller, Intelligent ITC and Height Sensor, Collision Center, Closed Loop Water Recycle System and Abrasive Removal System.

NEW IWM IWM6020U Waterjet Cutting System (#3641)

NEW IWM IWM6020U Waterjet Cutting System (#3641)

6' X 20' CNC Cantilever Type Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.

IWM IWM6030H Waterjet Cutting System (#3640)

IWM IWM6030H Waterjet Cutting System (#3640)

10' X 20' CNC Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.

NEW IWM WC5WA3020H Waterjet Cutting System (#3639)

NEW IWM WC5WA3020H Waterjet Cutting System (#3639)

6' X 10' CNC Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.

NEW IWM IWM1010H Waterjet Cutting System (#3638)

NEW IWM IWM1010H Waterjet Cutting System (#3638)

3' X 3' CNC Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.

2003 Flow WMC 4020 Waterjet Cutting System (#3617)

2003 Flow WMC 4020 Waterjet Cutting System (#3617)

12’ X 6’ CNC Abrasive Waterjet Cutting System with Flow PC Based Flowmaster Controller, 100HP 60KPSI Dual-Intensifier Pump, Powered Z-Axis.

NEW IWM WC5WA3216H Waterjet Cutting System (#3601)

NEW IWM WC5WA3216H Waterjet Cutting System (#3601)

5' X 10' CNC Abrasive Waterjet Cutting System with P.C. Controller, 60,000 PSI, Abrasive Hopper.

2004 Ebbco GR5-0502 Abrasive Removal System (#3584)

2004 Ebbco GR5-0502 Abrasive Removal System (#3584)

Ebbco GR5-0502 Abrasive Removal System is Designed to Continuously Remove the Spent Abrasive that Collects in the Catch Tank, Thus Eliminating Downtime for Clean Out and Maximizes Production. The GR5-0502 Can be Retrofitted to Any Abrasive Waterjet Cutting Machine Tool.

2002 Omax 2626 Waterjet Cutting System (#3576)

2002 Omax 2626 Waterjet Cutting System (#3576)

26” X 26” Waterjet Cutting System with Omax PC-Based CNC Controller running Omax Make and Omax Layout Software Suites, 30 HP 50KPSI Direct Drive Pump, Solids Removal System with Self-Dumping Hopper.

NEW IWM WC5WA2513H Waterjet Cutting System (#3555)

NEW IWM WC5WA2513H Waterjet Cutting System (#3555)

4' X 8' CNC Abrasive Waterjet Cutting System with P.C Controller, 60,000 PSI, Abrasive Hopper.

NEW IWM WC5WA4020H Waterjet Cutting System (#3556)

NEW IWM WC5WA4020H Waterjet Cutting System (#3556)

6' X 13' CNC Abrasive Waterjet Cutting System with CNC Control, 60,000 PSI, Abrasive Hopper, Software Compatible to DXF and G-Code.

Flow Mach 4 7320B 5-Axis Waterjet Cutting System (#3511)

Flow Mach 4 7320B 5-Axis Waterjet Cutting System (#3511)

8' X 24' Waterjet Cutting System with 100 HP 87,000 PSI Hyper Jet Dual Intensifier, Dynamic XD 5-Axis Head, 300 LB Hopper.

2008 Jet Edge HR612 Waterjet Cutting System (#3307)

2008 Jet Edge HR612 Waterjet Cutting System (#3307)

6' X 12' High Rail Gantry Waterjet Cutting System with 12" Z Axis Abrasive Cutting Head, Aquavision Di PC Based Controller and Remote Pendant, Jet Edge Model iP6050 Intensifier Pump w/ 55,000 PSI Continuous Pressure, 50 HP, Sigmanest CAD/CAM Software.

2017 Techni i510-G2 Waterjet Cutting System (#3293)

2017 Techni i510-G2 Waterjet Cutting System (#3293)

5' X 10' Waterjet Cutting System with the AM2000 Controller Running Softec™ Waterjet Cutting Software, Techni Quantum NXT 55 Servo Electric Pump with 55KPSI Cutting Pressure, 500LB Bulk Abrasive Hopper and Under 2300 Power On Hours!

2008 Flow IFB 624 Waterjet Cutting System (#3261)

2008 Flow IFB 624 Waterjet Cutting System (#3261)

6’ x 24’ Single Tank Design Dual Head Abrasive Waterjet Cutting System with Flow PC Based CNC Controller Running Flow Path 7 and Flow Cut 7, Dual Abrasive Cutting Heads, 2,000LB Abrasive Hopper, 100 HP 60KPSI Dual Intensifier Pump with 9000 Hours since Complete Rebuild and Closed Loop Chiller

2006 Flow IFB 6X12’ Dynamic Waterjet Cutting System (#3068)

2006 Flow IFB 6X12’ Dynamic Waterjet Cutting System (#3068)

6’ x 12’ CNC Abrasive Waterjet Cutting System with Flowmaster PC Based Controller, Dynamic Cutting Head, 50HP, 60K PSI Hyperjet Intensifier Pump and Abrasive Hopper.

2010 Multicam ZERO HOUR 3000  Series Waterjet Cutting System (#1970)

2010 Multicam ZERO HOUR 3000  Series Waterjet Cutting System (#1970)

10’ X 5’ CNC Abrasive Waterjet Cutting System with Multicam EZ Controller with Integrated EZ G-Code Software / Operation System, Full Nesting Capability on Board, AC for Control Cabinet, 800 LB Bulk Abrasive hopper, 30HP 60KPSI KMT Intensifier Pump. Machine has literally ZERO HOURS on it and has never been installed since new.

Stay Up-To-Date on New Listings