CNC Lathes / Turning Centers

Filter:
Sort:
Year
Price
Capacity
2018 Yama Seiki GTZ-2600Y CNC Turning Center (#3770)

2018 Yama Seiki GTZ-2600Y CNC Turning Center (#3770)

9.84" X 23.3" CNC Turning Center with Fanuc 31i G.Linc 350 Control, Dual 16 Station Turrets w/ Y Axis on the Upper Turret All Positions Are Capable of Live Tooling, Coolant Through Spindle, Renishaw Tool Presetter, (2) Microcentric Collet Chucks, (2) 3-Jaw 8" Hydraulic Chucks, Long Parts Ejector (Sub), Parts Catcher, Parts Conveyor, Chip Conveyor, Barfeed Interface, High Pressure Coolant System (1000 PSI), Coolant Flush SlideWay Covers, Roller Type Linear Guide Ways, (2) Sets Additional M-Codes, (3) Axial & (3) RadiaL Live Tooling.

2008 Leadwell T7 CNC Turning Center (#3761)

2008 Leadwell T7 CNC Turning Center (#3761)

13.78” X 21.25” CNC Turning Center with FANUC 0i-Mate CNC Control, 20HP, 12 Position Turret 8" 3 Jaw Chuck w/ 2" Capacity, Chip Conveyor.

2010 Nakamura Tome TW-20 Multi-Axis CNC Lathe (#3752)

2010 Nakamura Tome TW-20 Multi-Axis CNC Lathe (#3752)

42.51” X 10.63” X 7.56” Multi-Axis CNC Lathe with Fanuc 18ITB Control, (2) 12 Position Turrets w/ All Live Stations and 5000 RPM Max on Each Spindle, 3 Jaw Chuck on the Main Spindle, Collet Setup on the Sub Spindle, Parts Catcher Included.

2000 Haas SL20T CNC Turning Center (#3733)

2000 Haas SL20T CNC Turning Center (#3733)

23" X 20" X 10.3" CNC Turning Lathe with 4000 RPM Spindle, 2.0" Bar Capacity, 20 HP Motor, 10 Station Turret.
2014 Doosan Puma 480 CNC Lathe (#3726)

2014 Doosan Puma 480 CNC Lathe (#3726)

35.4" X 39" X 26" CNC Lathe with Fanuc 32i TB Control, 50 HP 1,500 RPM Spindle Motor, 2 Speed Gearbox, 6.5" Bar Capacity and 24" Diameter Chuck, Chip Conveyor, Tool Presetter, Tailstock and Mist Buster.

2002 Eurotech 730 SLY Mill-Turn Center (#3724)

2002 Eurotech 730 SLY Mill-Turn Center (#3724)

20.47" Swing X 19.687" Max part length X 12.187" Max turn dia Mill-Turn Center with Fanuc 18iT Control, 2.750" Bar Capacity on Main Spindle w/ 1.625" Through on Sub Spindle, Live Tooling, Y-Axis, C-Axis, Collet Chucks on Both Spindles, Tool Holder Set, Refurbished by Eurotech.

2000 Hardinge Cobra 51 CNC Turning Center (#3714)

2000 Hardinge Cobra 51 CNC Turning Center (#3714)

21" X 8.25" X 14" CNC Turning Center with Fanuc 21iT Control, Collet Ready Spindle, 8" Hardinge Chuck, Parts Catcher, 4500 RPM Max Speed and 20HP Fanuc Spindle Motor.

2016 Mazak Quick Turn Nexus 350 II MSY CNC Lathe (#3657)

2016 Mazak Quick Turn Nexus 350 II MSY CNC Lathe (#3657)

29,5" X 16.5" CNC Lathe with 4" Bar Capacity, Sub Spindle & Y Axis Milling, Main Spindle 3500 RPM, 12" Main Spindle Chuck And 10" Chuck On The Sub, 12 Station Live Tool Turret, High Pressure Coolant, Kitagawa 15" Chuck, Chip Conveyor.

2004 Haas SL-20T CNC Lathe (#3656)

2004 Haas SL-20T CNC Lathe (#3656)

23" X 20" X 10.3" CNC Lathe with Haas CNC Control, 2" Bar Capacity, 20 H.P. Vector Dual Drive, 8” 3-Jaw Chuck, Collet Chuck, High Intensity Lighting, Chip Auger, Tailstock, Coolant System & Pump, Automatic Parts Catcher, Auto Door, Barfeed Interface, Haas Barfeeder.

2010 Eurotech 735 SLY CNC Turning Center (#3627)

2010 Eurotech 735 SLY CNC Turning Center (#3627)

11.4" X 22" X 2.75" CNC Turning Center with Fanuc 31i B Control, 4,000 RPM at 35 HP, Sub Spindle W/ 5,000 RPM at 15 HP and a 12 Station Turret W/ All Stations Live, C-Axis on Both Spindles and Y-Axis for Off Center Milling Capability, Parts Catcher, Chip Conveyor, Tool Setter, Standard Work Holding And Assorted Tool Holder Set.

Axelson Manual Lathe (#3559)

Axelson Manual Lathe (#3559)

42’ X 432” Manual Lathe with 4 Steady Rests, Tailstock.

2003 Sunfirm MAXTEC CST 42160CNC Turning Center (#3553)

2003 Sunfirm MAXTEC CST 42160CNC Turning Center (#3553)

26” X 160” Flatbed Big Bore CNC Lathe with Fanuc 0i-TC CNC Control, 10" Spindle Bore, Heavy Duty 8 Position Turret, Manual Tail.

2014 Leadwell T5 CNC Turning Center (#3551)

2014 Leadwell T5 CNC Turning Center (#3551)

5.35” X 5.35” CNC Turning Center with Fanuc CNC Control, Gang Slide Capacity for 5 or 6 Tools, 1.6" Bar Capacity 4500 RPM. 

2011 Okuma Millac 33TU Mill-Turning Center (#3550)

2011 Okuma Millac 33TU Mill-Turning Center (#3550)

11.91" X 3.94" X 7.87" 5-Axis Mill-Turning Center with FANUC 31iA5 Control, MP Systems High-Pressure Coolant System (1,000 PSI), Renishaw Probing System, 4" 3-Jaw Kitagawa Chuck, 30 Tool ATC w/ 20 HP Milling Spindle Accepts CAT 40 Tooling.

2010 Okuma Millac 33TU 5 Axis Mill-Turning Center (#3549)

2010 Okuma Millac 33TU 5 Axis Mill-Turning Center (#3549)

11.91" X 3.94" X 7.87" 5-Axis Mill-Turning Center with FANUC 31iA5 Control, 16 Tool ATC w/ 20 HP Milling Spindle, Accepts CAT 40 Tooling, MP Systems High-Pressure Coolant System (1,000 PSI), Renishaw Probing System, 4", 3-Jaw Kitagawa Chuck.

2012 Hyundai WIA L300LC CNC Turning Center (#3544)

2012 Hyundai WIA L300LC CNC Turning Center (#3544)

22” X 52” CNC Turning Center with Fanuc i Series CNC Controls, 12 Position Turret, 12" 3-Jaw Chuck, ATS 22ITL Collet Chuck With Collets & Spindle Liners, Chip Conveyor, Coolant System.

2007 Acra FCH-2680NC CNC Turning Center (#3543)

2007 Acra FCH-2680NC CNC Turning Center (#3543)

23.6” X 26” CNC Turning Center with FANUC 0iT Control, A2-15 "C" Type Spindle w/ 7.1" Diameter Through and 30 HP at 1200 RPM, Vertical and Horizontal Turret, Coolant Tank & Coolant System w/ 1 HP High Power Motor, Double Doors & Splash Guard, Hydraulic & Manual All-in-One Tailstock, Chip Conveyor.

2000 Haas SL-20T Lathe (#3535)

2000 Haas SL-20T Lathe (#3535)

10.3” X 20” CNC Turning Center with HAAS CNC Controller, 8” Chuck, 2” Bar Cap., 10.3” Max Cutting Diameter, 4000 Max RPM, 20 HP, 20” Max length, 23” Max Swing, 10 Pos. Turret, Chip Auger, High Intensity Lighting, Parts Catcher, Tool Pre-Setter and TailStock, Bar Feeder.

2008 Femco HL-55S Turning Center (#3521)

2008 Femco HL-55S Turning Center (#3521)

28” X 25” CNC Turning Center with Fanuc Oi-T CNC Control, 35 HP Spindle Motor, Two Range Gearbox, Standard w/ a 15" Chuck Mounted on the A2-11 Spindle Nose, 4.7" Bar Capacity, Programmable Tailstock, Chip Conveyor.

2005 Nakamura Tome WT 300 MMSY CNC Turning Center (#3520)

2005 Nakamura Tome WT 300 MMSY CNC Turning Center (#3520)

12.2” X 10.6” CNC Turning Center with Fanuc 18i-TB CNC Controls, LNS Quick Load Barfeeder for feeding 2.5" Diameter Barstock Assorted Live Tooling, 2.5" Diameter Bar Stock, Dual 12 Station Turrets, Main Spindle & Sub Spindle, C-Axis On Both Spindles, Y-Axis on Upper Turret.

2016 Eurotech B-750 SLY Stallion CNC Mill/Turning Center (#3518)

2016 Eurotech B-750 SLY Stallion CNC Mill/Turning Center (#3518)

21.7" X 47.0" CNC Mill/Turning Center with 16 Station Live Tool Turret, C Axis for 2 Sided Machining.

2009 Samsung SL35A/1500 CNC Lathe (#3495)

2009 Samsung SL35A/1500 CNC Lathe (#3495)

16.5" X 60.2" Diameter CNC Lathe with Fanuc 0iTC Control, Programmable Tailstock, Steady Rest, Tool Setter, Chip Conveyor.

Mazak SQT10MS Multiturn CNC Lathe (#3487)

Mazak SQT10MS Multiturn CNC Lathe (#3487)

9.06" X 12.05" CNC Mill/Turn Center with Mazak Mazatrol T-32-3 CNC Controller, Tooleye Tool Presetter, Collet Chucks Main & Sub-Spindle, Parts Catcher, Chip Conveyor, All Available Standard and Live Toolholders.

2013 Hyundai WIA L280L CNC Turning Center (#3474)

2013 Hyundai WIA L280L CNC Turning Center (#3474)

16.1” X 42.1” Turning Center with Fanuc 0i-TD Control 10 Station Tool Turret, Standard 10" 3 Jaw Chuck, Chip Conveyor, Tool Setter.

2011 Doosan Lynx 220LMA CNC Turning Center (#3428)

2011 Doosan Lynx 220LMA CNC Turning Center (#3428)

20.1” X 9.8” CNC Turning Center with Fanuc I Series Control, C Axis, Live Tooling, 8" Chuck, Tailstock, Tool Setter, Parts Catcher, LNS Mist Collector and Available Manuals. 

2005 Puma 240C CNC Turning Center (#3417)

2005 Puma 240C CNC Turning Center (#3417)

13.8” X 21.7” CNC Turning Center with FANUC Series 21i-TB Control, 8" Diameter Hydraulic Chuck, Parts Catcher, Tool Sensor (Not Tested), Chip Conveyor and Coolant System.  

2000 Daewoo Puma 300 GL CNC Turning Center (#3344)

2000 Daewoo Puma 300 GL CNC Turning Center (#3344)

15.7” Turning Diameter CNC Turning Center with Fanuc 18IT Control, 12” Pratt and Burnerd Quick Change Chuck, 10 Position Turret, 1 Piece O.D. Holders, 6 Piece 2” I.D. Holders, 1 Piece 1-1/2” I.D. Holder, 6 Piece Face and Turn, All Manuals, Chip Conveyor, Gantry System.

2010 Fryer SL-8 CNC Lathe (#3341)

2010 Fryer SL-8 CNC Lathe (#3341)

20” X 12”-19" Between Centers, CNC Turning Center with Touch Screen Control, 4200 RPM at 30 HP, 2" Bar Capacity, Chip Conveyor and Tailstock are Included.

2010 Nakamura-Tome Super NTM3 CNC Turning Center (#3262)

2010 Nakamura-Tome Super NTM3 CNC Turning Center (#3262)

7.48” X 25.2” Live Tool Sub Spindle CNC Turning Center with Fanuc Series 16i-TB CNC Control, 2.6” Bar Capacity (Main), Dual Spindle, Tri-Turret Design, Y-Axis on Both Upper Turrets, 5,000 RPM Max Spindle Speed Left/Right Spindles, 6,000 RPM Max Spindle Speed Milling, (2) 24-Station Upper Turrets, 24 Station Lower Tool Turret, Work Piece Take-Off Conveyor, Chip Conveyor, High Pressure Coolant System, LNS Quick Load Servo S3 Barfeeder.

2003 Mori Seiki MT2000a1S Mill/Turn Center (#1960)

2003 Mori Seiki MT2000a1S Mill/Turn Center (#1960)

21.6” X 40.1” Cutting Capacity Mill/Turn Center with Mori Seiki MSG-501 CNC Control, 2.5” Bar Capacity, 0.001° Spindle Indexing, 10HP Milling Head 120° (*/-) Milling Head Rotating Range, 40 Position ATC, Rapids 945 IPM, 5 Axis Milling Head with B-Axis and Y-Axis, Chip Conveyor, Probing, (10) Capto Tool Holders Included, Extremely Well Maintained and in Excellent Condition running extremely high tolerance parts as removed from Medical Facility.

2003 Okuma LU45 CNC Turning Center (#3173)

2003 Okuma LU45 CNC Turning Center (#3173)

23” x 121” Capacity CNC Turning Center with Okuma OSP-U100L CNC Controller, Dual Turrets, Dual Chucks, 10.23” Spindle Bore with 50HP Drive and 24” Bison 4-Jaw Chuck

Stay Up-To-Date on New Listings