98.5” X 78.75” Capacity Radial Drill Press with #6MT, 1250 RPM, 10HP Spindle Drive, Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base Casting, Box Table, Integrated Coolant System and Worklight
STANDARD EQUIPMENT:
- Diameter of column: 21.65"
- Distance from column surface to spindle center, max: 98.42"
- Distance from column surface to spindle center, min.: 19.68"
- Travel of spindle head: 78.74"
- Distance from base surface to spindle end, max.: 78.74"
- Distance from base surface to spindle end, min.: 21.65"
- Elevating height of arm: 39.37"
- Effective area of table: 39.37” x 31.49” x 22.04"
- Dimensions of base: 138.58” x 55.12”x 12.60"
- Taper hole in spindle: #6 MT
- Stroke of spindle: 17.72"
- R.P.M. of spindle (rpm range x steps): 16-1250 x 16 Steps
- Feed of spindle: 0.04"-3.2" x 16 Steps
- Main motor (HP): 10 HP
- Elevating motor (HP): 5 HP
- Coolant pump (HP): 1/4 HP
- Machine height from floor, max. 157.09"
- Base + column height: 151.57”
- Approximate Dimension (LxWxH): 157.48” x 63” x 151.57”
- Approximate Shipping weight: 27,500 Lbs.
- Voltage: 220 or 440V (Must Specify)
- Amps Required @ 220V: 18KVA/50Amps
- Amps Required @ 440V: 18KVA/25 Amps
FEATURES:
- Hardened and Ground Arm Slideways
- Arm Elevation is controlled by Electric Motor
- Safety Device prevents arm from dropping
- T-Slots and Drain Channels on casting
- Hardened and Ground Gears
- Box Table
- Coolant System
- Worklight
- Toolbox
- Wired 220V or 440V. Please Specify.
Factory Specifications Linked Here
***All Price, Location and Specifications Subject to Change without Notice***
MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.
