78.74” X 72.83” Capacity Radial Drill Press with #5MT, 1920 RPM, 7.5 HP Spindle Drive, Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base Casting, Box Table, Integrated Coolant System and Worklight
GENERAL SPECIFICATIONS:
- Diameter of column: 17"
- Distance from column surface to spindle center, max: 78.74"
- Distance from column surface to spindle center, min.: 16.93"
- Travel of spindle head: 61.81"
- Distance from base surface to spindle end, max.: 72.83"
- Distance from base surface to spindle end, min.: 15.34"
- Elevating height of arm: 43.31"
- Effective area of table: 40” x 32” x20"
- Dimensions of base: 115” x 45” x 10"
- Taper hole in spindle: #5 MT
- Stroke of spindle: 14.57"
- R.P.M. of spindle (rpm range x steps): 40-1920 x 12 Speeds
- Feed of spindle: 0.007"-0.096" x 6 Speeds
- Main motor (HP): 7.5 HP
- Elevating motor (HP): 3 HP
- Clamping Motor for Column and GearBox: 1 HP
- Clamping Motor for Arm: ½ HP
- Coolant pump (HP): 1/8 HP
- Machine height from floor, max.: 136.61”
- Approximate Dimension (LxWxH): 130" x 59" x 123.6"
- Approximate Shipping Weight: 15,650 Lbs.
- Voltage: 220 or 440V (Must Specify)
- Amps Required @ 220V: 18KVA/40 Amps
- Amps Required @ 440V: 18KVA/20 Amps
FEATURES:
- Hardened and Ground Arm Slideways
- Arm Elevation is controlled by Electric Motor
- Safety Device prevents arm from dropping
- T-Slots and Drain Channels on casting
- Hardened and Ground Gears
- Box Table
- Coolant System
- Worklight
- Toolbox
- Wired 220V or 440V. Please Specify.
Factory Specifications Linked Here
***All Price, Location and Specifications Subject to Change without Notice***
MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.