63” X 63” Capacity Radial Drill Press with #5MT, 1920 RPM, 7.5 HP Spindle Drive, Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base Casting, Box Table, Integrated Coolant System and Worklight
GENERAL SPECIFICATIONS:
- Diameter of column: 17"
- Distance from column surface to spindle center, max: 63"
- Distance from column surface to spindle center, min.: 13.375"
- Travel of spindle head: 49.625"
- Distance from base surface to spindle end, max.: 63"
- Distance from base surface to spindle end, min.: 13"
- Elevating height of arm: 35.438"
- Effective area of table: 27.63” x 19.63” x 15.75"
- Dimensions of base: 97.63” x 41.34”x 8.25"
- Taper hole in spindle: #5 MT
- Stroke of spindle: 14.63"
- R.P.M. of spindle (rpm range x steps): 40-1920 x 12 Speeds
- Feed of spindle: 0.003"-0.038" x 6 Speeds
- Main motor (HP): 7.5 HP
- Elevating motor (HP): 2 HP
- Clamping Motor for Column and GearBox 1 HP
- Coolant pump (HP): 1/8 HP
- Machine height from floor, max. 125”
- Base + column height: 151.57”
- Approximate Dimension (LxWxH): 114" x 56" x 115"
- Approximate Shipping Weight: 11,250 Lbs.
- Voltage: 220 or 440V (Must Specify)
- Amps Required @ 220V: 18KVA/35 Amps
- Amps Required @ 440V: 18KVA/17.5 Amps
FEATURES:
- Hardened and Ground Arm Slideways
- Arm Elevation is controlled by Electric Motor
- Safety Device prevents arm from dropping
- T-Slots and Drain Channels on casting
- Hardened and Ground Gears
- Box Table
- Coolant System
- Worklight
- Toolbox
- Wired 220V or 440V. Please Specify.
Factory Specifications Linked Here
***All Price, Location and Specifications Subject to Change without Notice***
MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.