---
title: Sharp LMV-42 Vertical Knee Mill (#1300)
description: NEW Sharp LMV-42 Vertical Knee Mill - 9” X 42” Capacity Vertical Milling Machine with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Meehanite Casting & Hard Chromed Ways
---

<https://www.southernfabsales.com/machines>

# [Sharp LMV-42 Vertical Knee Mill (#1300)](https://www.southernfabsales.com/machines/new-sharp-lmv-42-vertical-knee-mill-1300)

 Written by [Southern Fabricating Machinery Sales](https://www.southernfabsales.com/machines/author/southern-fabricating-machinery-sales) | Apr 12, 2018 8:04:05 PM

9” X 42” Capacity Vertical Milling Machine with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Meehanite Casting & Hard Chromed Ways** **

**STANDARD EQUIPMENT:**

- Hard-Chromed Ways
- Font & Rear Rubber Way Cover
- One Shot Lube System
- Variable Speed Head
- Tool Kit (includes**: **Machine manual, Half nut wrench, Wrench 17, & 19m, Set of 6 Allen wrenches, Phillip screwdriver, Flat head screwdriver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator Can of paint.)

**FEATURES:**

- 3HP Motor
- Variable Speed Drive (60-4500 RPM)
- R-8 Spindle
- Meehanite Casting
- Chromed Ways
- Self-Lubricating Motor Shaft Extends Pulley Life
- Abec-7 Super Precision Spindle Bearings

**GENERAL SPECIFICATIONS:**

- Table Working Surface: 9” x 42”
- T-Slots Number and Size: 3 Slots, 5/8”
- Travels (X, Y, And Z): 30” x 12” x 5”
- Ram Travel: 12”
- Knee Travel: 16”
- Spindle To Column (Min-Max): 6 3/4”-18 1/2”
- Spindle Nose To Table (Min-Max): 2 1/8”-18”
- Spindle Motor: 3 HP
- Spindle Nose Taper: R8
- Spindle Variable Speed Drive: 60-4500 Rpm
- Quill Feed 3 Speed (IPR): 0.0015, .003, .006”
- Head Swivels: 360°
- Head Tilt (Lt. To Rt) : 45°
- Head Tilt (Up And Down): 45°
- Floor Area (W x D x H): 7’ x 6.5’ x 6.75’
- Weight: 2,400 Lbs.
- Total Power Consumptions
- 220V: 3KVA/15 amps
- 440V: 3KVA/7.5 amps

**FEATURES, FUNCTION, & BENEFITS:**

**ISO 9002 certified: **Quality up to world industry standards.  
**Meehanite casting: **Highest grade of casting possible.

**A pair of precision ABEC-7 angular contact bearings to support spindle.  **

**The quill is ground and chromed to fit the housing: **This insures a spindle run out of 0.0002” T.I.R.

**Motor shaft and VariDrive pulleys are dynamically balanced, then chromed for a flawless fit, ground ribs on inside diameter: **For smooth speed changes.

**Motor shaft has an oil channel in the center that is fed by grease fitting on the lower end: **To keep VariDrive pulley moving smoothly on the shaft.

**This LMV mill uses a roller bearing for the lower support of the shaft: It ensures proper loading, support and alignment. It also prevents the shaft from being distorted by the tension of the belt: **For quiet, accurate operation at any speed for years and years.

**One shot lubrication system: **For lubrication of ways and lead screws. (X, Y and Z-axis)

**Hand scraped saddle and knee:  **For better oil retention.  It avoids having chips and dirt embed in the knee and damage the sliding surface.

**Oil groove are milled:  **For maximum lubrication on all wear areas.

**Table and saddle backlash is controlled by double nut design:  **Keeps lead screw in contact with bronze nuts all times to keep backlash at .0008” within 20”.

**Table and saddle are mounted with thrust bearings that are preloaded:  **Eliminating endplay for precisely controlled lateral movement.

**Ways are hard chromed dovetail on saddle and column.**

*****All Price, Location and Specifications Subject to Change without Notice*****

[View full post](https://www.southernfabsales.com/machines/new-sharp-lmv-42-vertical-knee-mill-1300)

```json
{
  "@context" : "http://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "Southern Fabricating Machinery Sales"
  },
  "dateModified" : "2021-02-05T16:45:33.865Z",
  "datePublished" : "2018-04-12T20:04:05Z",
  "headline" : "Sharp LMV-42 Vertical Knee Mill (#1300)",
  "image" : {
    "@type" : "ImageObject",
    "height" : 480,
    "url" : "https://cdn2.hubspot.net/hubfs/2215571/1300%20NEW%20Sharp%20LMV-42%20Knee%20Mill.jpg",
    "width" : 318
  },
  "mainEntityOfPage" : "https://www.southernfabsales.com/machines/new-sharp-lmv-42-vertical-knee-mill-1300",
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "height" : 60,
      "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
      "width" : 60
    },
    "name" : "Machines"
  }
}
```