14" X 40" Capacity Manual Engine Lathe with 2,200 RPM 3HP, Infinitely Variable Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single or 3 Phase Electrics, Coolant System Foot Brake and Tailstock.
STANDARD EQUIPMENT:
FEATURES:
SPECIFICATIONS:
Capacity
Swing Over Bed: 14”
Swing Over Cross Slide: 8-5/8”
Swing Over Gap: 20”
Width Of Bed: 8-1/2”
Width of Gap: 9.25”
Center Height from Top of Compound: 1.5”
Distance Between Centers: 40”
Headstock
Spindle Nose Type: D1-4 camlock
Spindle Bore: 1-1/2”
Spindle Speeds: 30-2,200 RPM
Taper of Spindle Bore: MT#5
Threads and Feeds
Longitudinal Feeds – in/rev (40): 0.0012 - 0.0294”
Cross Feeds – in / rev (40): 0.0003 –0.01”
Inch Threads (40): 4-112 tpi
Metric Threads (22): 0.45 – 7.5mm
Leadscrew Pitch, Diameter: 8 tpi, ⅞”
Carriage
Saddle Width: 13.25”
Apron Width: 11”
Cross Slide Width: 6.75”
Cross Slide Travel: 7”
Compound Rest Travel: 4”
Compound Width x Length 3-1/2 x 8-1/2”
Bed
Bed Length: 66”
Bed Width: 8-1/8”
Tailstock
Quill Travel (graduated): 4-1/2”
Quill Diameter: 1-3/4”
Quill Taper: MT#3
General
Spindle Motor: 3 HP
Net Weight (approx.): 1,650 LBS
Standard Color: Gray
Dimensions: 77” x 29” x 55”
Electrical:
Voltage 220 3PH (440 volts optional)
Total Power Consumption 220V 3KVA/10 amps, 440V 3KVA/5 amps
***All Price, Location and Specifications Subject to Change without Notice***
MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.