11" x 18" Precision Toolroom Lathe with 5HP 4,000 RPM DIGITAL VARIABLE SPEED (D.V.S.) Drive System, 50 Millionth Tir Accuracy, Harding Type Design, Hardened and ground spindle, Independent electric feed-rate control on carriage and cross slide, Quick-change inch/metric gearbox with 36 changes, Spindle supported by double angular contact bearings, Quick-action compound slide for threading, One piece alloy steel material, hardened and ground bedways and Hardened and ground leadscrews.


STANDARD EQUIPMENT

  • Splash Guard
  • Drive Dog
  • Coolant System
  • Drive Gear
  • 5C Collet Closer
  • Adjustable Tool Setting Gauges
  • (2) 5C Collet Holder
  • Halogen Work Light
  • Chuck Guard
  • Drive Plate
  • Spindle Nose Cover
  • Headstock Center
  • Leadscrew Cover
  • Tailstock
  • Wired 220V, Single Phase/3 Ph   (440V requires optional transformer)
  • Tool Kit (Includes: Machine manual, Half nut wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screwdriver, Flat head screwdriver, Oil can, Grease Gun, Rear way cover bracket, Pin for Indicator, and Can of paint.)

EQUIPPED WITH

  • DIGITAL VARIABLE SPEED (D.V.S.) Drive System
  • High-speed spindle (infinitely variable 130-4,000 rpm), accuracy within 50 millionths TIR
  • Hardened and ground spindle
  • Independent electric feed-rate control on carriage and cross slide.
  • Quick-change inch/metric gearbox with 36 changes.
  • Spindle supported by double angular contact bearings.
  • Quick-action compound slide for threading.
  • One piece alloy steel  material, hardened and ground bedways, with turcite coating on carriage and bed for smooth movements.
  • Adjustable thread-length control stops
  • Hardened and ground leadscrews.


GENERAL SPECIFICATIONS:

Capacity:

Swing over bed: 11”

Swing over carriage: 9”

Swing over cross slide: 6”

Distance between centers: 18”

Spindle

With round 5C collets: 11/16”

With hexagon 5C collets: 7/8”

With square 5C collets: ¾”

With expanding chucks: 3”

With step chucks: 1-1/16 – 6”

With jaw chucks: 5”

Speed range (infinitely variable): 130-4,000 rpm

Spindle nose taper (inside): 5C (10°)

Spindle nose taper (outside): 4°

Spindle bore: 1 “

Travel & Feed Range

Cross slide travel: 6”

Compound slide travel: 3”

Quick-action compound slide travel: 0.1”

Carriage power feed range: 5/16-7”

Cross slide power feed range: 5/16-4”

Threading

Leadscrew pitch, diameter: 8 tpi, 1”

Inch threads (36): 11-108

Metric threads (36): 0.275-2.7

Tailstock

Tailstock spindle diameter: 1.358”

Tailstock spindle taper: MT #2

Tailstock spindle travel: 3.75”


General

Electricity required: 220V, 3 phase or single phase, (*440V requires additional transformer)

Main motor: 5HP (digital variable speed)

Coolant pump motor: 0.25 hp

Coolant tank capacity: 5 gallon

Net weight (approximately): 2,300 lbs.


***All Price, Location and Specifications Subject to Change without Notice***

MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.