5' X 10' Omax Abrasive Waterjet with Omax PC Based Control, Enduromax P5060V Direct Drive 50 HP Pump, 60,000 PSI Cutting Pressure, Bulk Abrasive Hopper, Chiller, Omax A-Jet Cutting Head (Angle Range 0-60 Degrees) Tilt-A-Jet Precision Calibration Kit, Motorized Z-Axis and Maxjet 5i Nozzle

GENERAL SPECIFICATIONS
X-Axis: 126”
Y-Axis: 62”
Table Size: 144"(L) x 77"(W)
Material Supported Slats: 4” X ⅛” Galvanised Steel
Max Supported Material Load: 400 LBS / SQ FT (1,950 KG/SQ METER)
Maximum Cutting Speed: 180 IPM
Linear Positional Accuracy: (+/-) 0.0010"
Repeatability: (+/-) 0.0010"
Ballbar Circularity: (+/-) 0.0025"
Computer Control Hardware: PC Based
Computer Control Software: Integrated
Electrical Requirements: 3-Phase, 380-480 VAC +-10%, 50-60 HZ
Installed Dimensions: 225"(L) x 100"(W) x 115"(H)
Operating Weight: 23,200 LBS
Weight (Tank Empty): 6,200 LBS
Enduromax 5060V Pump Specs:
Maximum Jetpower: 42.5 HP
Output Pressure: 60,000 PSI
Orifice & Flow Rate: 0.016" / 1.20 GPM
Dimensions: 66"(L) x 36"(W) x 38.5"(H)

INCLUDES: Omax PC Based Control, Enduromax P5060V Direct Drive 50 HP Pump, 60,000 PSI Cutting Pressure, Bulk Abrasive Hopper, Chiller, Omax A-Jet Cutting Head (Angle Range 0-60 Degrees) Tilt-A-Jet Precision Calibration Kit, Motorized Z-Axis and Maxjet 5i Nozzle

***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***

94900