12’ X 13’ CNC High Definition Plasma Cutting System with Burny 10 LCD Plus Controller,  Hypertherm HPR260(XD*) Plasma Power Source, Automatic Gas Console, Turbonest Software, Laser Pointer

GENERAL SPECIFICATIONS

  • Travel X:  12’
  • Travel Y:  13’, 6”
  • Cut Capacity  12' x 13' 6"
  • Plasma Power Source Make: Hypertherm
  • Plasma Model: HPR260 HyPerformance Plasma System
  • Plasma Working Amperage: 30 - 260 Amp with Arc Marking Capabilities
  • Plasma Power Source Model: HPR 260 (XD*)
  • Capacity, Virtually Dross Free Cutting         26 ga - 1" Mild Steel
  • Capacity, Production Pierce Capacity             1-1/4" Mild Steel
  • Capacity, Edge Star                                        2-1/2" max. Mild Steel
  • Estimated Cut Speeds, 1/4" mild steel, 260 amps          240 IPM
  • Estimated Cut Speeds, 1/2" mild steel, 260 amps          145 IPM
  • Estimated Cut Speeds, 3/4" mild steel, 260 amps          90 IPM
  • Estimated Cut Speeds, 1" mild steel, 260 amps             65 IPM
  • Estimated Cut Speeds, 1-1/4" mild steel, 260 amps       45 IPM
  •  Tables  Two 5' x 10' Water tables with slats
  • Electrics        480V/3-Ph
  • *XD Optional Upgrade is available for optional additional price of $5,000

EQUIPPED WITH  

  • Burny 10 LCD Plus PC Based CNC Control
  • MTC Turbonest BE Automatic Nesting
  • Operators Console (right hand side, standard mounting)
  • CNC Mounting Bracket
  • AC Brushless Servo System with dual lower axis rack & pinion drives (600 IPM)
  • Dual Linear Ways Y Axis Only
  • Bellows
  • Heavy Duty Master Carriages & Powertrack for Plasma
  • Machine power disconnect / transformer
  • 230/460 V/3-Ph
  • Air Manifold & Filter/Regulator
  • Laser Pointer for Torch
  • Plate Positioning
  • Floor Mount Rails
  • Automatic Gas Console
  • Controlled at the Burn 10 Plus (located right hand side - far end of machine)
  • ALLTra Plasma Height Control (fully integrated) for X - Y Table
  • AC Brushless Servo Height Control System
  • Remote Voltage Control at Operators Console
  • Ohmic Sense (IHS)
  • Quick Stop Safety Switch (Collision Sensor)
  • Powertrack for (X) Axis Right Hand Side
  • Overhead application
  • Provision for Plasma & Oxyfuel hoses & cable.

 ***We strongly encourage personal inspection of all pieces of used equipment***
***All Price, Location and Specifications Subject to Change without Notice***
Sold